Saturday, December 03, 2016
Front Brake Kit – Part No.: 140-14075-N
Call (805) 388-1188
Forged Superlite 4R Big Brake Front Brake Kit (Race)      Product Number: 140-14075-N     Price: $2,170.00
*NOTE: Brake Line Kit 220-6746 is included in this Brake Kit.

Brake Kit No: 140-14075-N
Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) - Nickel Plate Caliper - Plain Face Rotor

Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) - Nickel Plate Caliper - Plain Face Rotor
zoom image
Kit Contents:
Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) Parts Laid Out - Nickel Plate Caliper - Plain Face Rotor

Wilwood Forged Superlite 4R Big Brake Front Brake Kit (Race) Parts Laid Out - Nickel Plate Caliper - Plain Face Rotor
zoom image
Kit Summary:

Spindle Type:
Factory Disc Spindle ;
Mount Type: Radial
Caliper Type: 4 - Nickel Plate
Rotor Diameter: 13.06
Min Wheel Diameter Req'd*: 17
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

Price: $2,170.00
Forged Superlite 4R Big Brake Front Brake Kit (Race)

This dedicated competition road race kit is specially configured for 1998-2002 Camaros and Firebirds, or 1993-97 cars that have been upgraded with 1998-02 spindles in classes where rotor drilling and slotting is prohibited. Four piston, forged aluminum, Superlite 4R/ST radial mount Quick-Silver nickel finish calipers with Thermlock pistons, PolyMatrix H compound race pads, and two-piece 13.06” diameter Spec 37 alloy HD48 directional vane rotors, deliver consistent stopping power and extreme duty durability under sustained high heat with this ready to bolt-on kit. The calipers are volume matched for compatibility with original equipment power brake system output, and easily matched to common master cylinder sizes available for manual balance bar pedals. Kits include braided stainless steel flex lines, radial mount caliper brackets, and all the necessary hardware to complete the installation.


Fitment & Installation Details


Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic

Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic

Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic
zoom image
Compatible Vehicles for this Brake Kit:
BRAKE KIT:   Forged Superlite 4R Big Brake Front Brake Kit (Race)    
SPINDLE TYPE:
Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes:   View All Vehicles
Chevrolet Pontiac

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.
lookup vehicles
Search Front Brake Kits by Year-Make-Model
Caution THIS BRAKE KIT HAS AN HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fenderby this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.
Wheel Clearance: Assembly Instructions:
Wheel Clearance Diagram

Wheel Clearance Diagram
zoom image


Assembly Instructions
Note(s):
1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
2. Kit may fit some 17" wheels. Check wheel clearance diagram in kit installation instructions before purchase.



Kit Components & Specifications Click on BLUE LINKS for Additional Details
Calipers: Info / Part Number:
Left Hand - Part No: 120-13266-N
Right Hand - Part No: 120-13265-N
Type: Forged Superlite 4R
Finish Color: Nickel Plate
Piston Count: 4
Piston Area (In²): 4.84
Piston Type: Thermlock
Mount Type: Radial
Brake Pad Plate: 7420
Brake Pad Area (In²): 8.2
Brake Pad Volume (In³): 4.9
Pad Compound: PolyMatrix H
Forged Superlite 4R Caliper - Nickel Plate

Forged Superlite 4R Caliper - Nickel Plate
zoom image
Rotors: Info / Part Number:
Left Hand - Part No: 160-12787
Right Hand - Part No: 160-12786
Type: HD 48 Curved Vane
Style: Plain Face
Surface Finish: Plain
Material: Spec-37 Iron
Outside Diameter (in): 13.06
Width (in): 1.25
Vane Count: 48 CV
Design Type: HD
Bedded: No
Dynamically Balanced: Yes
HD 48 Curved Vane - Spec-37 Iron - Plain

HD 48 Curved Vane - Spec-37 Iron - Plain
zoom image
Rotor Hats: Info / Part Number:
Hat - Part No: 170-6837
Type: Big Brake Hat - Short Offset
Material: Aluminum
Finish Color: Black E-Coat
Hat Offset Dimension (in): 0.88
Bolt Circle 1: 5 x 4.50
Bolt Circle 2: 5 x 4.75
Bolt Circle 3:
Stud Diameter - BC 1: 0.56
Stud Diameter - BC 2: 0.52
Stud Diameter - BC 3: 0
Big Brake Hat - Short Offset - Aluminum - Black E-Coat

Big Brake Hat - Short Offset - Aluminum - Black E-Coat
zoom image
Hubs: Info / Part Number:
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Calipers: Info / Part Number:
O-ring Kit: 130-5100
Replacement Dustboot: N-A
Replacement Piston 1: 200-7550
Replacement Piston 2: 200-7553
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: 230-5978
Wear Plate - Left Hand: 300-5923
Wear Plate - Right Hand: 300-5922
Pad Retainer: N-A
Bleed Screw Kit: 220-0627
Brake Line Kits: Info / Part Number:
Front Line Kit:
220-6746
Hat: Info / Part Number:
Bolt Kit: 230-4572
Hubs: Info / Part Number:
Bolt Kit: