Friday, December 02, 2016
Brake Pad Part No: 150-12006K

Brake Pad Guide Brake Pads Chart

Brake Pads
High-Temperature Racing Pads

Pad#:   7912
Compound:   BP-30
Wilwood Brake Pad Plate #7912

Wilwood Brake Pad Plate #7912
zoom image
<Go Back>

Call (805) 388-1188

Product Number: 150-12006K     Price: $71.93
Pad Dimensions
Thickness(in): Area(in²): Volume(in³): Beded:
.49 5 1.8 N
Temperature & Friction Ratings
Peak Temperture Rating: Peak Friction Rating:
1300+ F. 0.62
Dust & Noise Ratings
Dust Production Rating: Pad Noise Rating:
N-A N-A

Performance Characteristics
  • High friction, smooth intitial response.
  • Steady rise in friction as temperature increases.
  • Low wear rate
  • High friction, smooth intitial response.

Vehicle Applications

Pad Illustration and Dimensions
Wilwood Brake Pad Plate #7912 Large Drawing

Wilwood Brake Pad Plate #7912 Large Drawing


Compound Characteristics
BP-30

BP-30


Compound Data Sheet
Application:

  • Race ONLY compound is a value priced, proven workhorse for most weekly category asphalt late models, sprints, modifieds, and sportsman divisions.
  • Hard braking dirt late models, DIRT modifieds, and rear inboard sprint brakes with vented iron or steel rotors.
  • SCCA club racers, rally, and auto-cross.
  • High MPH drag cars if high end fade occurs with lower temperature pads.
Characteristics:

  • Newest racing pad from Wilwood
  • Medium-high friction compound with good cold response.
  • Smooth, predictable engagement with excellent control over a wide range of applications.
  • Long wearing pad in the middle temperature ranges with moderate wear in sustained high heat conditions.
  • Easily bedded without abrasion on new iron or steel rotors.
Compound Temperature Range & Torque Values
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.

Wilwood Compatible Calipers: Pad # 7912
Powerlite 2R Radial Mount
Wilwood Powerlite 2R Radial Mount Caliper

Wilwood Powerlite 2R Radial Mount Caliper
zoom image
Powerlite 2R Radial Mount Caliper

Powerlite PL2R/ST radial mount calipers provide a high strength, lightweight,two-piston option for open wheel, formula car road racing and other similar types of competition, where high clamping efficiency within a limited wheel space and optimized rotor diameter are Required. Designed with Machined billet aluminum body with offset 1.75” piston bores and Common radial stud spacing and mounting offsets. The PL2R series uses Top-loading quick-access type 7912 pads in a variety of compounds. PL2R/ST caliper feature: Nickel plated Quick-Silver body finish with Thermlock pistons. View Powerlite 2R Radial Mount Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
2 2.40 5
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
1.8 0.5 11
Powerlite Radial Mount
Wilwood Powerlite Radial Mount Caliper

Wilwood Powerlite Radial Mount Caliper
zoom image
Powerlite Radial Mount Caliper

The Powerlite four piston radial mount caliper starts at 2.26 pounds with a sleek profile, superior strength, lightweight and durable in higher temperature situations. Easily adapted to a wide range of sports, rally, and off road driving applications. View Powerlite Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
4 1.58 3.00 5
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
1.8 0.86 11