Brake Pad Part No: 15J-7063K


High-Temperature Racing Pads

Pad#: 9830
Compound: PolyMatrix J
Prod #: 15J-7063K
Price: $598.47
PolyMatrix J Coming Soon
PolyMatrix J Coming Soon
Pad Dimensions
Thickness(in) 1.18
Area(in²) 12.3
Volume(in³) 11.4
Bedded N
UPC Number
UPC 889545037234
Dust & Noise Ratings
Dust Production Rating N-A
Pad Noise Rating N-A
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

PolyMatrix J Compound

Pad Characteristics

  • Gradual rise from to medium torque as temperature increases.
  • Long wear and high temperature fade resistance.
  • Tuning pad for reduced response in medium to high temperature ranges.
  • Compatible with all iron and steel alloy rotors.

Pad Applications

  • "
  • Race ONLY compound endurance road racing and super-speedways with iron rotors.
  • Fast intermediate ovals requiring less aggressive brake response.
  • Popular ""tuning"" compound to reduce bias against A, B, or H compounds when additional hydraulic adjustments are not available. "

Rotor Material

PolyMatrix J Performance Stats PolyMatrix J Performance Stats
PolyMatrix J Friction Coefficient and Temperature Values PolyMatrix J Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.


 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023