Midget Inboard Hub - Dynamic

Wilwood's Gen II Midget 38 tooth splined inboard hub provides a basis to provide dynamic rotor mounting of standard GEN II rotor adapters. Manufactured from high strength aluminum, it provides a lightweight and strong solution for rotor adapter mounting. Gen II hubs offer improved clearance and easier install due to wider rotor adapter attachment bolt spacing.

Sprint Inboard Hub Kit - Dynamic

Wilwood's Gen II Sprint 46 tooth splined inboard hub & adapter kit provides a basis to provide dynamic rotor mounting of 8 x 7.00" bolt pattern rotors. Hub & adapter kits contain: rotor adapter and dynamic rotor mounting bolt kit. Additional T-nuts and bolts are required for rotor mounting and are not supplied with the clamp kit.

Midget Inboard Hub Kit - Dynamic

Wilwood's Gen II Midget 38 tooth splined inboard hub & adapter kit provides a basis to provide dynamic rotor mounting of standard 6 x 5.50” bolt pattern rotors. Hub & adapter kits contain: rotor adapter and dynamic rotor mounting bolt kit. Additional T-nuts and bolts are required rotor mounting and are not supplied with the clamp kit.

Sprint Inboard Hub Kit - Dynamic

Wilwood’s Gen II Sprint 46 tooth splined inboard hub & adapter kit provides a basis to provide dynamic rotor mounting of 6 x 5.50" bolt pattern rotors. Hub & adapter kits contain: rotor adapter and dynamic rotor mounting bolt kit. Additional T-nuts and bolts are required for rotor mounting and are not supplied with the clamp kit.

Sprint Inboard Hub - Dynamic

Wilwood's Gen II Sprint 46 tooth splined inboard hub provides a basis to provide dynamic rotor mounting of standard GEN II rotor adapters. Manufactured from high strength aluminum, it provides a lightweight and strong solution for rotor adapter mounting. This further improved Gen II hub offer increased clearance and easier install with a new designed stud alignment.

Sprint Inboard Hub Kit - Dynamic

Wilwood’s XRZ Sprint 46 tooth splined inboard hub & adapter kit provides a basis to provide dynamic rotor mounting of 8 x 7.00" bolt pattern rotors. The Gen III Hubs new spline enables easy quality/precise fit for DMI and Winters 46 spline axles. Using new 5 bolt rotor plate to hub attachment for added stiffness and user-friendly assembly/disassembly. Rotor plate has a smaller overall dimension from OD to ID with thicker material to add extended life and improved overall stiffness. Rotor plate can be removed without removing axle spline saver. Additional T-nuts and bolts are required for rotor mounting and are not supplied with the clamp kit. T-nut kit is available under part # 230-14645.

Sprint Inboard Hub Kit - Dynamic Lug Mount

Wilwood’s XRZ Sprint 46 tooth splined inboard hub & adapter kit provides a basis to provide dynamic lug drive rotor mounting of 8 lug 7.18" snap ring rotors. The XRZ Hubs new spline enables easy quality/precise fit for DMI and Winters 46 spline axles. Using new 5 bolt rotor plate to hub attachment for added stiffness and user-friendly assembly/disassembly. Rotor plate has a smaller overall dimension from OD to ID with thicker material to add extended life and improved overall stiffness. Rotor plate can be removed without removing axle spline saver. Hub/lug drive version first of new system that requires no bolts attaching rotor to plate with stainless clip and float clips. Designed to be used with rotor 160-16923 (11.75” x 0.81” x 7.18” lug mount) and radial mount caliper. Additional snap ring and wear plates are required for rotor mounting and are not supplied with the clamp kit. Snap ring kit with wear plates is available under part # 300-12561.

Sprint Inboard Hub - Dynamic

Wilwood’s XRZ Sprint 46 tooth splined inboard hub kit provides a basis to provide dynamic rotor mounting in either a T-nut or lug mount drive style using new 5 x 4.875” rotor adapters. The XRZ Hubs new spline enables easy quality/precise fit for DMI and Winters 46 spline axles. Using new 5 bolt rotor plate to hub attachment for added stiffness and user-friendly assembly/disassembly. Rotor plate has a smaller overall dimension from OD to ID with thicker material to add extended life and improved overall stiffness. Rotor plate can be removed without removing axle spline saver.

Caliper Inlet Fitting

Plug  Wilwood’s fittings are manufactured to high quality standards and are available in various styles. Use these pipe plugs to seal extra 1/8-27 NPT ports or bleeder screw holes.

Bleed Screw Kit

Wilwood’s bleed individual bleed screws and bleed screw kits are manufactured to high quality standards and are available in different thread sizes. These premium grade fittings have been designed for use in repair and maintenance of your Wilwood calipers. Please see the Wilwood Parts and Technical catalog or visit the caliper section of this website for your caliper application.

Bracket Kit, Open Wheel - Left Front Sprint

Wilwood's Open Wheel Bracket kits are manufactured from high-strength aluminum alloy. Bracket 250-16236 is designed for Sprint car spindle using the GP320 4 piston caliper (PN 120-15752) and 10.50"x .16 diameter left front rotor (PN 160-10717).

Bracket Kit, Open Wheel - Left Front Sprint

Wilwood’s Open Wheel Left Front Bracket kits are manufactured from high strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-16231 is designed for Sprint front spindles to mount Dynapro Single caliper with a 3.25" mount for an 10.20" diameter Left Front rotor.

Bracket Kit, Open Wheel - Inboard Sprint

Forged Superlite Radial Mount calipers are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-9271 is designed for Sprint rears with a 3.50” side bell mount pillars. Bracket mounts superlite series radial caliper and 11.75” diameter rotor.

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount calipers are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-6309 is designed for any 3.50”mount center. Bracket mounts superlite series radial caliper and 12.19 diameter rotor. Will fit 11.75 diameter rotors when original equipment and mounts were designed for 11.75 diameter.

Bracket Kit, Open Wheel - Right or Left Rear

Wilwood’s Open Wheel Right or left Rear Bracket kits are manufactured from high strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-13410 is designed for Sprint Right or Left Rear to mount Dynapro Single caliper with a 3.25" mount for an 10.20" diameter Right or Left Rear rotor.

Bracket Kit, Open Wheel - Right or Left Rear

Wilwood’s Open Wheel Right Rear Bracket kits are manufactured from high strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-13411 is designed for Sprint Right or Left Rear to mount GP320 4 piston caliper (PN 120-15752) with a 10.50" diameter Right or Left Rear rotor (PN 160-10717)

Bracket Kit, Open Wheel - Inboard Sprint

Wilwood’s Open Wheel Bracket kits are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-13150 is designed for Sprint Inboard rears with a 3.50” side bell mounts. Bracket mounts the BNDLR caliper with a 4.75” center to center and using a 10.50” diameter rotor.

Bracket Kit, Open Wheel - Inboard Midget

Wilwood’s Open Wheel Bracket kits are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 250-13179 is designed for Midget Inboard rears with a 5.25” side bell mounts. Bracket mounts the BNDLR caliper with a 4.75” center to center and using a 10.50” diameter rotor. (Don’t use 1.88 pistons BNDLR)

Bracket Kit, Open Wheel - Left Front Sprint

Wilwood’s Open Wheel Left Front Bracket kits are manufactured from high strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-12872 is designed for Sprint front spindles to mount Dynapro Single caliper with a 3.25" mount for an 11.00" diameter Front rotor.

Bracket Kit, Open Wheel - Left Front Midget

Wilwood's Open Wheel Left Front Bracket kits are manufactured from high-strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-12873 is designed for Midget front spindles to mount Dynapro Single caliper with a 3.25" mount for a 10.20" diameter Front rotor.

Bracket Kit, Open Wheel - Front Asphalt Midget

Wilwood’s Open Wheel Front Bracket kits are manufactured from high strength aluminum alloy, steel thread insert and black e-coat finish. Bracket 250-10534 is designed for Midget Asphalt front spindles using the GP320 4 piston caliper (PN 120-15753) and 10.50” diameter rotor.

Bracket Kit, Open Wheel - Inboard Sprint

Wilwood's Open Wheel Inboard Bracket kits are manufactured from high-strength aluminum alloy with a Type III hard anodize finish. Bracket set 250-14767 is designed for Sprint Inboard rears with a 3.50” side bell mounts. Bracket mounts the BNDLR caliper with a 4.75” center to center radial mount to a range of rotor diameters from 11.75” to 12.19”.

Bracket Kit, Open Wheel - Front

Wilwood’s Open Wheel Front Bracket kits are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 249-14497/98 (pair Right and Left) is designed for Asphalt Sprint front spindles with a 4.00” to 4.25” mount using the Dynapro Radial Mount caliper with a 5.98” mount and 11.75” diameter rotor.

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount caliper brackets are manufactured from high strength aluminum alloy with an e-coat finish. Bracket set 249-16488/89 is designed for a 3.50” mount center and a 5 degree mount offset. Bracket mounts Superlite series radial caliper with 11.75" diameter rotor.

Bracket Kit, Caliper Mounting (Racing)

Forged Superlite Radial Mount calipers are manufactured from high strength aluminum alloy with an e-coat finish. The bracket set 250-17753 is designed for 3.50” mount center side bell mount with counterbored mounting holes that increase rotor clearance. Bracket mounts Superlite series of radial caliper with a 12.00"" to 12.19"" diameter rotor.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kits contain bolts and hardware for dynamic mounting for specific hat or rotor adapters.

Bolt Kit-Caliper Mount

Wilwood’s Caliper Mount Bolt kit 230-0204 contains (4) 3/8-24 x 1.25” Lock wire drilled bolts, (4) washers and (16) 0.035” shims for mounting Dynalite / Dynapro / Dynapro Single calipers to to bracket.

Shim Kit-Caliper

Caliper Shim kit for 3/8" diameter bolts. 10 quantity, 0.035” thick shims in a convenient kit.

Bolt-Hex Head

Wilwood’s Hex Head Cap Screws are manufactured from high strength alloy steel or stainless steel. Various plating methods are used depending on application.

Bolt Kit-Rotor

Bolt Kit-Rotor Wilwood’s Dynamic Mount Rotor Bolt kits contain bolts and hardware for dynamic mounting for following specific rotor plate combinations. Rotor 160-10717, Plates 300-10743 and 300-10720

Bolt Kit-Caliper Mount

Wilwood’s Caliper Mount Bolt kit 230-10852 contains (4) 3/8-24 x 1.00” hex head bolts, (4) washers, (8) 0.035” shims and (4) 0.016" shims for mounting GP320 2 piston calipers to to brackets.

Bolt Kit-Caliper Mount

Wilwood’s Caliper Mount Bolt kits contain various bolts and hardware for caliper to bracket mounting for specific vehicle applications.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kit 230-14414 contains bolts and hardware for dynamic mounting of iron steel rotor to specific hat or rotor adapters.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kit 230-14845 contains bolts and hardware for dynamic mounting of SAS rotor on specific hat or rotor adapters

Rotor Adapter-Open Wheel

Left front rotor adapter for Sprint front hubs. Adapter features a hub mount bolt circle of 3 x 5.00” used with rotor 160-10717 rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 230-10800 Dynamic Rotor Bolt and T-nut Kit for rotor mounting.

Rotor Adapter-Open Wheel

Splined rotor adapter for Sprint rear. Adapter features a hub mount bolt circle of 3 x 5.00” used with rotor 160-10717 rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 230-10800 Dynamic Rotor Bolt and T-nut Kit for rotor mounting.

Rotor Adapter-Open Wheel

Front rotor adapter for Asphalt Midget hubs utilizing 6 x 5.00 bolt circle and standard 6 x 5.50” bolt circle rotors. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodized finish. Use t-nut kit 230-14845

Rotor Adapter-Open Wheel

Rotor adapter for Sprint / Midget front hubs. Adapter is supplied with a standard 3 x 5.00” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy and hard anodized for wear resistance.

Rotor Adapter-5 x 5

Floating Rotor Adapter for Asphalt Racing Hubs with “backside” mountsand GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 x 7.00” bolt circle rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.. Use 230-14845 Rotor Bolt and T-nut Kit to attach rotors.

Dynamic Lug Rotor Mounting and Snap Ring Kit

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Rotor Adapter-Open Wheel

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter has unique mounting 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Rotor Adapter-Open Wheel

Rotor adapter for Wilwood’s GEN II Sprint inboard hubs. Adapter has unique mounting 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Rotor Adapter-5 x 5

Dynamic Lug Mount Rotor Adapter for Asphalt Racing Hubs with “backside” mounts and GEN III Sprint Inboard Hubs. With a hub mount bolt circle of 5 x 4.875” and will mount any 8 lug, 7.18" snap ring rotor. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish. Use 300-12561 Snap Ring and Wear Plate Kit to attach rotors.