Front Brake Kit – Part No: 140-10856
Call (805) 388-1188
GP320 Midget Front Brake Kit
Prod #: 140-10856
Price: $1,926.17

Front Brake Kit — 140-10856


Kit Contents
Wilwood GP320 Midget Front Brake Kit Parts Laid Out - Type III Anodize Caliper - Drilled Rotor Wilwood GP320 Midget Front Brake Kit Parts Laid Out - Type III Anodize Caliper - Drilled Rotor Zoom Image



Kit Summary
Spindle Type:
Mount Type: Lug
Caliper Type: 4 - Black Anodize
Rotor Diameter: 10.50
Min Wheel Diameter Req'd*:
*This Brake Kit may fit -inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
UPC Number
UPC 0

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only


GP320 Midget Front Brake Kit

The GP320 System features Wilwood’s competition proven dynamic rotor mount system, specially treated PolyMetallic lightweight steel alloy rotors, and the highly efficient clamping force of the GP320 billet caliper for the most positive and fade-free performance available for sprint racing.Component Features: GP 320 Billet Aluminum 4 Piston Calipers with Four small pistons provide balanced distribution of the pad load for improved response and longer pad wear. PolyMetallic Steel Alloy Rotors: Unlike ceramic coatings that can flake away from the base metal during high heat cycling, Wilwood’s PolyMetallic coating controls heat transfer and provides a durable surface that can generate high friction for long, trouble-free duty cycles without the need for recoating. Dynamic mounting with Wilwood’s t-nut system isolates all thermal stress and distortion at the rotor mounting points caused by the different temperatures and expansion rates between the lightweight alloy steel rotor and the aluminum rotor mount plate. The rotors stay flatter and run truer to eliminate any possibility of pad knock-back or deflection. Dynamic Mount Rotor Plate: Lightweight billet alloy plate is machined with the slots to accept the rotor bolt t-nuts and adapt the rotor directly to 3 bolt sprint hubs. Wilwood 6211-CM Brake Pads A rigid caliper mounting bracket with premium grade fasteners and shim washers are included for secure, deflection free mounting.


Fitment & Installation Details


GP320 Midget Front Brake Kit Assembly Schematic

GP320 Midget Front Brake Kit Assembly Schematic GP320 Midget Front Brake Kit Assembly Schematic Zoom Image


Compatible Vehicles for this Brake Kit
BRAKE KIT:   GP320 Midget Front Brake Kit
SPINDLE TYPE:  
This Brake Kit is Compatible with the Following Vehicle Makes:

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance Assembly Instructions

Wheel Clearance Diagram Wheel Clearance Diagram Zoom Image



Assembly Instructions
Notes
1. Obsolete kit. Use substitute kit part #.




Kit Components & Specifications
Calipers
Left Hand - Part No: 120-10715
Right Hand - Part No: 120-10714
Type: GP320
Finish Color: Type III Anodize
Piston Count: 4
Piston 1 Bore (in): 1.25
Piston 2 Bore (in): 1.25
Piston Area (In²): 2.46
Piston Type: Stainless
Mount Type: Lug
Brake Pad Plate: 6211
Brake Pad Area (In²): 3.65
Brake Pad Volume (In³): 1.03
Pad Compound: CM - Composite Metallic
GP320 Caliper - Type III Anodize GP320 Caliper - Type III Anodize Zoom Image
Rotors
Left Hand - Part No: 160-9929
Right Hand - Part No: 160-9929
Type: Polymetalic SA
Style: Drilled
Surface Finish: Polymetalic Coated
Material: Super Alloy
Outside Diameter (in): 10.50
Width (in): 0.78
Vane Count: 24 V
Design Type: Alloy Scalloped
Bedded: No
Dynamically Balanced: No
Polymetalic SA - Super Alloy - Polymetalic Coated Polymetalic SA - Super Alloy - Polymetalic Coated Zoom Image
Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:
Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Caliper Parts
O-ring Kit: 130-3602
Replacement Dustboot: N-A
Replacement Piston 1: 200-8488
Replacement Piston 2: 200-8488
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate - Left Hand: N-A
Wear Plate - Right Hand: N-A
Pad Retainer: 180-3861
Bleed Screw Kit: 220-7496
*Brake Lines Needed
Hat
Bolt Kit:
Hub
Bolt Kit:

Additional related products:




More Details
More Details
More Details
More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023