Brake Pad Compound: CM

Search Brake Pads for Wilwood Calipers
Filter by any of the following options to display a list of brake pads for Wilwood Brake Kits & Calipers:
Brake Pad Part#:
Pad Plate#:
Caliper Part#:
Caliper Name
Search Brake Pads for OEM Calipers
Enter Vehicle Year, Make, Model, and Option to find brake pads for OEM factory calipers:
Year:
Make:
Model:
Option

Compound: CM - Composite Metallic

Pad Characteristics

  • High friction pad with a smooth initial response
  • Low wear rate during sustained high heat braking
  • Formulation specific for use with stainless steel rotors
  • High heat fade resistance|(BP30 sugested replacement)

Pad Applications

  • Racing only - Not for street use
Rotor Material
  • Steel
  • Stainless Steel
  • Iron
  • Super Alloy
  • Titanium

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.


All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2024 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.05 June 23, 2023
​ ​