Brake Pad Part No: 150-16501K


High-Temperature Racing Pads

Pad#: 10420
Compound: BP-30
Prod #: 150-16501K
Price: $267.52
BP-30
BP-30 Brake Pads and Box
Picture shown is for illustrative purposes only
Pad Dimensions
Thickness(in) .80
Area(in²) 8.2
Volume(in³) 4.9
Bedded N
UPC Number
UPC 889545101676
Dust & Noise Ratings
Dust Production Rating N-A
Pad Noise Rating N-A
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

BP-30 Compound

Pad Characteristics

  • High friction pad with medium initial response, rises with increased temperature
  • Medium low temperature response
  • Low wear rate during sustained high heat braking
  • Predictable and linear response with excellent modulation
  • Very high heat fade resistance

Pad Applications

  • Racing only - Not for street use
  • Road course
  • Heavy duty pavement oval
  • Drag racing stainless
  • Sprint cars SAS
  • Club sport racers
  • Track cars with ABS

Rotor Material

  • Steel
  • Stainless Steel
  • Iron
  • Super Alloy
  • Titanium
BP-30 Performance Stats BP-30 Performance Stats Zoom Image
BP-30 Friction Coefficient and Temperature Values BP-30 Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Wilwood Compatible Caliper(s) for Pad #10420

XRZ4R Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 5.18
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 4.9
Max Rotor Widths (in) 1.35
Max Rotor Diameters (in) 14.00

XRZ4R Radial Mount Calipers

Wilwood’s next-generation XRZero race calipers combine decades of race experience, computer finite element analysis (FEA), and state-of-the-art machining into a race caliper that is lighter and stiffer, with zero drag. The unique shape of the high surface area body creates a caliper with superior brake fluid cooling and allows more airflow through the rotor. Optimized profile high-temperature seals provide better piston retraction resulting in less drag. The unique center X-bridge strengthens the caliper body without adding mass or obstructing airflow to the brake rotor or pads. Computer FEA design and precision CNC machining of the stress-flow forged aluminum body results in a caliper weighing just 4.66 pounds - 1/2 pound less than a comparable sized Wilwood Superlite caliper. View XRZ4R Radial Mount Calipers
XRZ4R Radial Mount
Caliper Dimensions
Piston Count 4
Piston Area Range (in²) 3.00 3.54
Pad Area Range (in²) 8.2
Pad Volume Range (in³) 4.9
Max Rotor Widths (in) 1.35
Max Rotor Diameters (in) 14.00

XRZ4R Radial Mount Calipers

Wilwood’s next-generation XRZero race calipers combine decades of race experience, computer finite element analysis (FEA), and state-of-the-art machining into a race caliper that is lighter and stiffer, with zero drag. The unique shape of the high surface area body creates a caliper with superior brake fluid cooling and allows more airflow through the rotor. Optimized profile high-temperature seals provide better piston retraction resulting in less drag. The unique center X-bridge strengthens the caliper body without adding mass or obstructing airflow to the brake rotor or pads. Computer FEA design and precision CNC machining of the stress-flow forged aluminum body results in a caliper weighing just 4.66 pounds - 1/2 pound less than a comparable sized Wilwood Superlite caliper. View XRZ4R Radial Mount Calipers

 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023