Camarillo, CA • July 9, 2012
If building a racecar, street rod, or Pro-Touring vehicle, Wilwood’s has a new Adjustable
Reverse Mount Adjustable Pedal assembly with two master cylinders positioned inside the
firewall and away from engine heat. Pedal assembly (Part number 340-12509) features an all aluminum frame and forged aluminum pedal arms with ladder style construction. The frame
and the pedal arms are black anodized for protection and an attractive appearance. The pedal
pads are of a special adjustable lightweight design that allows fine-tuning of the pedal location
and clearance. Also included with the assembly are the mounting studs, hardware, clevis, and
pivot pin balance bar that is designed to provide smooth and accurate settings of the brake
pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a
remote cable for quick on-track adjustments. The unit provides a 6.25 to 1 ratio to satisfy most
mounting and leverage requirements.
The master cylinders and the brake pedal assembly are sold separately.
For more information contact: Wilwood Engineering at (805) 388-1188 and request to speak with Erika Gordillo for marketing issues, or Andy Fritts for technical questions. Also, Wilwood’s website is accessible at www.wilwood.com or e-mail customerreply@wilwood.com.
About Wilwood Engineering
Founded by Bill Wood in 1977, Wilwood Engineering designs and manufactures high-performance disc brakes and
components from their headquarters in Camarillo, California. Engineered and rigorously tested for any application,
Wilwood celebrates 40 years of unsurpassed braking quality and performance with sleek, modern designs. From race
cars to classic cars, Wilwood has the brakes to stop you. For more information, contact Wilwood Engineering at:
Email Wilwood