Camarillo, CA • October, 2012
This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are
three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and
throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-
12411 is for front engine cars. Both units feature an aluminum frame with strong lightweight
fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for
protection and an attractive appearance. Also included with the pedal assembly are mounting
studs, clevises, and balance bar assembly that is designed to provide smooth and accurate
settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut,
or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a
5.25 to 1 nominal ratio.
Assembly Instructions:
Pedal assembly part number 340-12410 requires the customer to do the final assembly of the
throttle pedal to the main pedal assembly. Kit part number 340-12411 requires using the same
procedure as part number 340-12410 with the additional step of installing the throttle linkage
assembly, part number 340-12412 that is necessary for front engine vehicles.
For more information contact: Wilwood Engineering at (805) 388-1188 and request to speak with Erika Gordillo for marketing issues, or Andy Fritts for technical questions. Also, Wilwood’s website is accessible at www.wilwood.com or e-mail customerreply@wilwood.com.
About Wilwood Engineering
Founded by Bill Wood in 1977, Wilwood Engineering designs and manufactures high-performance disc brakes and
components from their headquarters in Camarillo, California. Engineered and rigorously tested for any application,
Wilwood celebrates 40 years of unsurpassed braking quality and performance with sleek, modern designs. From race
cars to classic cars, Wilwood has the brakes to stop you. For more information, contact Wilwood Engineering at:
Email Wilwood