Camarillo, CA • September 7, 2010
If you are building a racecar, street rod or Pro-Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit. The Reverse Mount Pedal Assembly positions the master cylinders inside of the firewall, while the Forward Mount Pedal Assembly positions the master cylinders outside of the firewall. Both units feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. The frame and the pedal arms are Platinum-E coated for protection and an attractive appearance. The pedal pads are of a special adjustable lightweight design that allows fine-tuning of the pedal location and clearance. Also included with the assembly of your choice are the mounting studs, hardware, clevis and pivot pin balance bar that are designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The units provide a 6.25 to 1 ratio on both clutch and brake pedal.
For more information contact: Wilwood Engineering at (805) 388-1188 or visit our website at www.wilwood.com or customerreply@wilwood.com.
For high resolution photos for printing please contact Wilwood Marketing at: (805) 388-1188
About Wilwood Engineering
Founded by Bill Wood in 1977, Wilwood Engineering designs and manufactures high-performance disc brakes and
components from their headquarters in Camarillo, California. Engineered and rigorously tested for any application,
Wilwood celebrates 40 years of unsurpassed braking quality and performance with sleek, modern designs. From race
cars to classic cars, Wilwood has the brakes to stop you. For more information, contact Wilwood Engineering at:
Email Wilwood