Pedals - Dirt Late Model

Pedal Kit,Forged Forward Mount
Mount Location: Swing
Mount Facing: Forward
Balance Bar: 
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 12.05
Pedal 2 Length: 12.05

Pedal Accessories Description

Wilwood’s new Adjustable Forward Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: Clevis and clevis pins required in the conversion. 340-12043 kits will convert the following forward mount assemblies 340-3950, 340-6916
Ordering Information for Pedal Accessories
Item No 340-12043
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $128.93
Purchase
Call (805) 388-1188
Pedal Kit,Forged Reverse Mount
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: 
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 11.89
Pedal 2 Length: 11.89

Pedal Accessories Description

Wilwood’s new Adjustable Reverse Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. 340-12044 pedal kit will convert the reverse pedal assembliy 340-3342.
Ordering Information for Pedal Accessories
Item No 340-12044
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $119.93
Purchase
Call (805) 388-1188
Floor Mount Tru-Bar Brake Pedal
Mount Location: Floor
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.0 to 1
Pedal 1 Length: 9.60
Mount Length: 10.34

Floor Mount Tru-Bar Brake Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Forward Floor mount pedal with a 6:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Floor Mount Tru-Bar Brake Pedal
Item No 340-15078
Info Details
Mount Location Floor
Finish & Color Black E-coat
Price $328.31
Purchase
Call (805) 388-1188
Reverse Swing Mount Tru-Bar Brake and Clutch Pedals
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 5.1 to 1
Pedal 2 Ratio: 5.1 to 1
Pedal 1 Length: 10.14
Pedal 2 Length: 10.14
Mount Length: 11.02

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Item No 340-15073
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $431.99
Purchase
Call (805) 388-1188
Reverse Swing Mount Tru-Bar Brake and Clutch Pedals
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 11.88
Pedal 2 Length: 11.88
Mount Length: 12.22

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Item No 340-15074
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $431.99
Purchase
Call (805) 388-1188
Reverse Swing Mount Tru-Bar Brake and Clutch Pedals
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 5.1 to 1
Pedal 1 Length: 11.88
Pedal 2 Length: 10.02
Mount Length: 12.22

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio and 5;1 clutch. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Item No 340-15075
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $431.99
Purchase
Call (805) 388-1188
Reverse Swing Mount Tru-Bar Brake Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 5.1 to 1
Pedal 1 Length: 10.14
Mount Length: 11.02

Reverse Swing Mount Tru-Bar Brake Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Item No 340-15076
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $364.91
Purchase
Call (805) 388-1188
Reverse Swing Mount Tru-Bar Brake Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 1 Length: 11.88
Mount Length: 12.76

Reverse Swing Mount Tru-Bar Brake Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Item No 340-15077
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $364.91
Purchase
Call (805) 388-1188
Swing Mount Brake Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 5.1 to 1
Pedal 1 Length: 10.14
Mount Length: 11.04

Reverse Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 5.1:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.
Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Item No 340-13837
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $176.94
Purchase
Call (805) 388-1188
Swing Mount Brake and Clutch Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 5.1 to 1
Pedal 2 Ratio: 5.1 to 1
Pedal 1 Length: 10.14
Pedal 2 Length: 10.14
Mount Length: 11.02

Reverse Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 5.1:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.
Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Item No 340-13835
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $244.02
Purchase
Call (805) 388-1188
Swing Mount Brake and Clutch Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 5.1 to 1
Pedal 1 Length: 11.89
Pedal 2 Length: 10.14
Mount Length: 12.77

Reverse Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms. The brake pedal uses a 6.25:1 ratio arm, but with a shorter 5.1:1 ratio arm on the clutch pedal for additional clearance when necessary. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size. .
Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Item No 340-13836
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $244.02
Purchase
Call (805) 388-1188
Swing Mount Brake Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 1 Length: 11.71
Mount Length: 12.06

Reverse Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6.25:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size
Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Item No 340-12509
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $176.94
Purchase
Call (805) 388-1188
Swing Mount Brake and Clutch Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 11.89
Pedal 2 Length: 11.89
Mount Length: 12.22

Reverse Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.
Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Item No 340-11299
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $244.02
Purchase
Call (805) 388-1188
Swing Mount Brake Pedal
Mount Location: Swing
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 7.0 to 1
Pedal 1 Length: 12.11
Mount Length: 12.85

Swing Mount Brake Pedal Description

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size
Ordering Information for Swing Mount Brake Pedal
Item No 340-13832
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $140.36
Purchase
Call (805) 388-1188
Floor Mount Clutch / Brake Pedal
Mount Location: Floor
Mount Facing: Forward
Balance Bar: No
Material: Aluminum
Pedal 1 Ratio: 6.0 to 1
Pedal 1 Length: 9.63
Mount Length: 10.42

Floor Mount Clutch / Brake Pedal Description

This floor mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size
Ordering Information for Floor Mount Clutch / Brake Pedal
Item No 340-13833
Info *New* Details
Mount Location Floor
Finish & Color Black E-coat
Price $92.93
Purchase
Call (805) 388-1188
Swing Mount Clutch / Brake Pedal
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: No
Material: Aluminum
Pedal 1 Ratio: 6.0 to 1
Pedal 1 Length: 12.02
Mount Length: 11.28

Reverse Swing Mount Clutch / Brake Pedal Description

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6;1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.
Ordering Information for Reverse Swing Mount Clutch / Brake Pedal
Item No 340-13574
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $96.39
Purchase
Call (805) 388-1188
Swing Mount Tru-Bar Brake and Clutch Pedal
Mount Location: Swing
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 12.07
Pedal 2 Length: 12.07
Mount Length: 12.57

Swing Mount Tru-Bar Brake and Clutch Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Swing Mount Tru-Bar Brake and Clutch Pedal
Item No 340-15072
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $431.99
Purchase
Call (805) 388-1188
Swing Mount Tru-Bar Brake Pedal
Mount Location: Swing
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 7.0 to 1
Pedal 1 Length: 12.12
Mount Length: 12.88

Swing Mount Tru-Bar Brake Pedal Description

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.
Ordering Information for Swing Mount Tru-Bar Brake Pedal
Item No 340-15079
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $328.31
Purchase
Call (805) 388-1188
Swing Mount Brake and Clutch Pedal
Mount Location: Swing
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 2 Ratio: 6.25 to 1
Pedal 1 Length: 12.05
Pedal 2 Length: 12.05
Mount Length: 12.38

Swing Mount Brake and Clutch Pedal Description

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.
Ordering Information for Swing Mount Brake and Clutch Pedal
Item No 340-11295
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $244.02
Purchase
Call (805) 388-1188
Floor Mount Brake Pedal
Mount Location: Floor
Mount Facing: Forward
Balance Bar: Yes
Material: Aluminum
Pedal 1 Ratio: 6.0 to 1
Pedal 1 Length: 9.60
Mount Length: 10.34

Floor Mount Brake Pedal Description

This floor mount pedal assembly mounts two single outlet brake master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.
Ordering Information for Floor Mount Brake Pedal
Item No 340-13831
Info *New* Details
Mount Location Floor
Finish & Color Black E-coat
Price $140.36
Purchase
Call (805) 388-1188
Swing Mount Clutch / Brake Pedal
Mount Location: Swing
Mount Facing: Forward
Balance Bar: No
Material: Aluminum
Pedal 1 Ratio: 7.0 to 1
Pedal 1 Length: 12.10
Mount Length: 12.89

Swing Mount Clutch / Brake Pedal Description

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal Arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.
Ordering Information for Swing Mount Clutch / Brake Pedal
Item No 340-13834
Info *New* Details
Mount Location Swing
Finish & Color Black E-coat
Price $92.93
Purchase
Call (805) 388-1188
Remote Bias Adjuster
Mount Location: 
Mount Facing: 
Balance Bar: 
Material: Plastic / Steel

Remote Bias Adjuster Description

Wilwood’s Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special bi-directional detente control providing the driver with positive adjustment feedback. The special five foot cable and housing (which can be cut to any length for a custom fit) provides an optimum bending radius for easy installation and smooth performance in tight confines. The assembly comes with two label faces for either front-to-rear or rear-to-front adjustment. Standard 3/8-24 thread fits Wilwood and most commonly used balance bars.
Ordering Information for Remote Bias Adjuster
Item No 340-4990
Info Details
Mount Location
Finish & Color Blue / Black
Price $51.30
Purchase
Call (805) 388-1188
Pedal Kit, Tru-Bar Brake
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: 
Material: Aluminum
Pedal 1 Ratio: 5.0 to 1

Pedal Kit, Tru-Bar Brake Description

Wilwood’s new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-15151 kits will convert the following 5.00 to 1 ratio reverse mount assemblies: 340-4828, 340-5180, 340-13835 and 340-13837.
Ordering Information for Pedal Kit, Tru-Bar Brake
Item No 340-15151
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $254.93
Purchase
Call (805) 388-1188
Pedal Kit, Tru-Bar Brake
Mount Location: Swing
Mount Facing: Reverse
Balance Bar: 
Material: Aluminum
Pedal 1 Ratio: 6.25 to 1
Pedal 1 Length: 11.88

Pedal Kit, Tru-Bar Brake Description

Wilwood’s new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-15152 kits will convert the following 6.25 to 1 ratio reverse mount assemblies: 340-3342, 340-5181, 340-6451, 340-11299 and 340-13836.
Ordering Information for Pedal Kit, Tru-Bar Brake
Item No 340-15152
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $254.93
Purchase
Call (805) 388-1188
Pedal Kit, Tru-Bar Brake
Mount Location: Swing
Mount Facing: Forward
Balance Bar: 
Material: Aluminum
Pedal 1 Ratio: 7.0 to 1

Pedal Kit, Tru-Bar Brake Description

Wilwood’s new Tru-Bar Forward Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-14922 kits will convert the following 7 to 1 ratio reverse mount assemblies:, 340-1287 and 340-13832
Ordering Information for Pedal Kit, Tru-Bar Brake
Item No 340-14922
Info Details
Mount Location Swing
Finish & Color Black E-coat
Price $254.93
Purchase
Call (805) 388-1188
Rod End and Spacer Kit
Mount Location: 
Mount Facing: 
Balance Bar: 
Material: steel

Rod End and Spacer Kit Description

Replacement Rod End and spacer kit for Tru-bar pedals. Contains 2 quantity 330-13830 Female Rod Ends, 2 quantity 330-13990 Trunnion Pedal Spacers in a convenient kit.
Ordering Information for Rod End and Spacer Kit
Item No 340-15595
Info Details
Mount Location
Finish & Color None
Price $37.43
Purchase
Call (805) 388-1188



Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 2020 Wilwood Engineering, Inc. - All Rights Reserved
Version: 1.3.13 May 2020