Bleed Screw Kit

Wilwood’s bleed individual bleed screws and bleed screw kits are manufactured to high quality standards and are available in different thread sizes. These premium grade fittings have been designed for use in repair and maintenance of your Wilwood calipers. Please see the Wilwood Parts and Technical catalog or visit the caliper section of this website for your caliper application.

M/C Fitting

Wilwood’s fittings are manufactured to high quality standards and are available in various styles. Brass fitting adapts 1/8-27 NPT threaded ports to 3/8-24 inverted flare fittings commonly used on 3/16" hard lines. Wilwood uses 1/8-27 NPT thread on both sides of proportioning and residual valves, inlets on calipers, and outlets on some master cylinders. Packed four to a kit.

Flexline Kit

Wilwood’s stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.

Flexline Kit

Wilwood’s stainless steel braided Flexline Kits are manufactured to high quality standards and are available in various -3 styles. These premium grade flexline kits have been designed for application specific kits. They are available as an optional item when ordering your disc brake kits and include all the required fittings. Wilwood highly recommends using these top quality flexlines as replacement for the OE rubber hoses.

Bracket Kit, Pedal

Wilwood's Clutch Pedal Adapter: Plate assembly that converts a vertical 2.25” center mount (most single outlet master cylinders) to a 3.22” horizontal spread of a tandem style master cylinder. Comes with push rod, hardware and a clevis assortment for current Wilwood clutch pedals.

Bolt Kit-Rotor

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Bolt Kit-Rotor

Wilwood’s Rotor Bolt kits contain bolts and hardware for mounting rotors specific hat or adapters.

Bolt Kit-Tee Bolt

Wilwood’s Tee Bolt kit features 8 quantity 3/8-24 x 1.43" long Tee Bolts, 12 Point Lock Nuts and Washers. Used in rear axle flanges with 3/8 holes. These solve the problem of OEM T-bolts that are not long enough for installation of thicker aftermarket bracket assemblies.

Bolt Kit-Rotor

Wilwood’s Dynamic Mount Rotor Bolt kits contain bolts and hardware for dynamic mounting for specific hat or rotor adapters.

Bolt Kit-Wheel Stud-ProStreet Hub

Wilwood’s ProStreet Hub Wheel Stud Kits contain 10 or 12 quantity high strength alloy studs for standard Pro Street and Drag Hubs. Studs (dependent on length) can have a Hex Socket head or 12 point head an 1/2-20 thread size and are available in 3 lengths, 1.75", 2.00" and 3.00" long. Studs are black oxide coating for corrosion resistance.

Caliper Bridge Bolt Kit

Wilwood’s Caliper Bridge Bolt kits contain bridge bolt(s), spacer tube(s) and associated hardware for specific Wilwood calipers.

Pad Retaining Clip

Pad Retaining Clip used in all Dynapro Lug Mount and Narrow Dynapro calipers in 0 38” rotor widths. Plated steel construction.

Caliper Wear Plate

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite / Dynapro Single caliper using a .49” to .50” thick pads.

Dynamic Lug Rotor Mounting and Snap Ring Kit

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Rotor Adapter-Drag

Dynamic Rotor Adapter for Wilwood’s Pro Street and Drag hubs. Adapters is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 6 x 6.25” bolt pattern for rotor mounting. Requires bolt & t-nut kit 230-14413 for rotor mounting. Made from high strength aluminum alloy with a corrosion and wear resistant Type III hard anodize finish.

Cotter Pin Kits

Cotter Pin Kit for.35 rotor width Dynalite series of calipers. Cotter pins are 1/8" x 2.50" long. Plated for corrosion resistance. Sold in a 10 pack quantity.

Caliper O-Ring Kit

Wilwood’s Caliper O-Ring kits are a convenient way to purchase and use caliper piston seals for periodic maintenance of your Wilwood Calipers. Calipers should maintained in regular schedule to prevent leakage and promote free piston travel. Kits come in 2 & 4 pack configurations.

Caliper O-Ring Kit

Wilwood’s Caliper O-Ring kits are a convenient way to purchase and use caliper piston seals for periodic maintenance of your Wilwood Calipers. Calipers should maintained in regular schedule to prevent leakage and promote free piston travel. Kits come in 2 & 4 pack configurations.

Caliper Square Ring Kit

Wilwood’s Caliper Square Ring kits are a convenient way to purchase and use caliper piston seals for periodic maintenance of your Wilwood Calipers. Calipers should maintained in regular schedule to prevent leakage and promote free piston travel. Kits come in 2, 4 & 6 pack configurations.

Caliper Square Ring Kit

Wilwood’s Caliper Square Ring kits are a convenient way to purchase and use caliper piston seals for periodic maintenance of your Wilwood Calipers. Calipers should maintained in regular schedule to prevent leakage and promote free piston travel. Kits come in 2, 4 & 6 pack configurations.