Search: brake pedal


Product Groups found: 79
Clutch Pedal Kits

Clutch Pedal Kits

Wilwood’s Clutch Pedal Kit comes with a floor mount forged adjustable clutch pedal of a 6 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a convenient kit.

Ordering Information for Clutch Pedal Kits
Details
PEDAL KIT,CLUTCH,7:1,3/4in.,M/C SLAVE SWING (OBSOLETE)
$231.70
340-1470
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,6:1,3/4in.,M/C SLAVE CYLINDER,FLOOR MOUNT
$263.34
341-15169
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,7:1,3/4in.,M/C SLAVE CYLINDER,SWING MOUNT
$263.34
341-15170
Call (805) 388-1188
Details
PEDAL KIT,CLUTCH,6:1,3/4in.,M/C SLAVE (OBSOLETE)
$231.70
340-1469
Call (805) 388-1188

Clutch Pedal Kits

Clutch Pedal Kits

Wilwood’s Clutch Pedal Kit comes with a swing mount forged adjustable clutch pedal of a 7 to 1 ratio, Integral Reservoir Master cylinder in a ¾ bore and universal pull type slave cylinder in a convenient kit.

Ordering Information for Clutch Pedal Kits
Details
PEDAL KIT,CLUTCH,7:1,3/4in.,M/C SLAVE SWING (OBSOLETE)
$231.70
340-1470
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,6:1,3/4in.,M/C SLAVE CYLINDER,FLOOR MOUNT
$263.34
341-15169
Call (805) 388-1188
Details
PEDAL KIT,FORGED,CLUTCH,7:1,3/4in.,M/C SLAVE CYLINDER,SWING MOUNT
$263.34
341-15170
Call (805) 388-1188
Details
PEDAL KIT,CLUTCH,6:1,3/4in.,M/C SLAVE (OBSOLETE)
$231.70
340-1469
Call (805) 388-1188

Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and does not include a throttle bell crank and linkage. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$398.41
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$507.55
340-12411
Call (805) 388-1188

Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12411 is for front engine cars and includes a throttle bell crank and linkage assembly. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$398.41
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$507.55
340-12411
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$480.42
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$613.72
340-16603
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$480.42
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$613.72
340-16603
Call (805) 388-1188

Floor Mount Brake and Clutch Pedal-Adj Ratio

Floor Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO
$371.92
340-16606
Call (805) 388-1188

Floor Mount Brake Pedal

Floor Mount Brake Pedal

This floor mount pedal assembly mounts two single outlet brake master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Floor Mount Brake Pedal
Details
PEDAL ASSEMBLY,6:1,DUAL,M/C (OBSOLETE)
$139.75
340-1285
Call (805) 388-1188
Details
PEDAL ASSEMBLY,6:1,DUAL,M/C,FORGED PEDAL
$162.12
340-13831
Call (805) 388-1188

Floor Mount Brake Pedal-Adustble Ratio

Floor Mount Brake Pedal-Adustble Ratio

Adjustable ratio balance bar single brake pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Brake Pedal-Adustble Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FLOOR MT ADJUSTABLE RATIO,5.25-6:1
$198.32
340-16376
Call (805) 388-1188

Floor Mount Clutch / Brake Pedal

Floor Mount Clutch / Brake Pedal

This floor mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size

Ordering Information for Floor Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,6:1,SINGLE CLUTCH/BRAKE ALUMINUM BASE (OBSOLETE)
$79.29
340-1289
Call (805) 388-1188
Details
PEDAL ASSEMBLY,6:1,SINGLE CLUTCH/BRAKE ALUMINUM BASE,FORGED PEDAL
$107.34
340-13833
Call (805) 388-1188

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Adjustable ratio single clutch pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Clutch / Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,SINGLE M/C,CLUTCH/BRAKE FLOOR MT,ADJ RATIO,5.25-6:1
$147.17
340-16378
Call (805) 388-1188

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO,TRUNNION
$905.12
340-16607
Call (805) 388-1188

Floor Mount Tru-Bar Brake Pedal

Floor Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Floor mount pedal with a 6:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Floor Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,6:1,DUAL M/C,TRUNNION
$379.20
340-15078
Call (805) 388-1188

Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio

Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio

Adjustable ratio Tru-Bar single brake pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference.The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FLOOR MT ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$457.94
340-16377
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms.The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$697.42
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$836.92
340-16605
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$697.42
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$836.92
340-16605
Call (805) 388-1188

Hand Brake Assemblies

Hand Brake Assemblies

Wilwood handbrake lever assemblies provide a lightweight, high-leverage component for drift cars, drag race cars and rally cars or any application where hand-actuation of one or more brake calipers is employed. With a lightweight aluminum forged 11:1 ratio “H” beam lever with ergonomic grip in a choice of vertical or horizontal static lever positioning Accepts any vertical flange master cylinder with 2.25” mount centers. Finished an a durable long lasting e-coat finish for corrosion resistance.

Ordering Information for Hand Brake Assemblies
Details
HAND BRAKE,ASSEMBLY,11:1 RATIO HORIZONTAL
$187.05
340-14768
Call (805) 388-1188
Details
HAND BRAKE,ASSEMBLY,11:1 RATIO VERTICAL
$187.05
340-14769
Call (805) 388-1188

Hand Cutting Brake Assembly

Hand Cutting Brake Assembly

Wilwood's Dual Cylinder Inline Cutting Brake kits utilize a single inlet, twin outlet flow-through master cylinder to simplify plumbing of the existing calipers and deliver precise steering-brake control for all types of off-road competition vehicles. This unit features a weight-saving, all-aluminum design with a high-leverage forged lever arm and an ergonomic full-length hand grip. Twin 3/4" bore cylinders combine with the high leverage lever arm to create instant high-pressure with minimal operator effort. The one-piece cast body incorporates integral mounting lugs to make for easy and secure mounting. The entire assembly is e-coat finished to resist weathering and oxidation.

Ordering Information for Hand Cutting Brake Assembly
Details
HAND BRAKE,ASSEMBLY,DUAL M/C,11:1 RATIO
$346.42
340-14744
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Adjustable Pedal Head Kit to pedal arm contains pedal head and hardware to mount to Wilood's adjustable pedal arm.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Replacement Brake or Clutch pedal pad kit for Wilwood’s new style forged pedal levers. Engineered from high strength aluminum alloy with a non-slip waffle finish. includes 4 quantity 10-24 x .50 hex lobe bolts to install.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Tandem Master Cylinder Bracket Adapter kit contains bracket, bolts, clevises and pushrod assembly to adapt Wilwood’s Chrysler Style or Tandem master cylinders to a single clutch assembly.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

The throttle bell crank assembly is part of pedal kit 340-12411 that is best suited for front engine vehicle applications. This kit can be used to convert a 340-12410 rear engine vehicle pedal kit for front engine use.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

This balance bar assembly is used in all current Wilwood standard balance bar pedals and remote pedal 60 degree master cylinder mounts. It can be used to replace a damaged or worn balance bar, or to update an older model balance bar that did not included the detent assembly. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable or adjustment knob for quick on-track adjustments

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

This balance bar kit includes a steel sleeve to use when fabricating custom steel arm pedals. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable or adjustment knob for quick on-track adjustments

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover is a slip on retrofit to our current adjustable pedal pad. Its rubber construction gives you a high traction, non-slip surface for your braking and clutch needs.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover kit with Trim plate provides you with a slip on retrofit to our current adjustable pedal pad. It’s rubber construction gives you a high traction, non-slip surface complemented by a stainless steel trim ring provides you with a non-rusting, high luster finish for your braking and clutch needs.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Brake Pedal Cover Trim plate is a slip on retrofit to our current adjustable pedal pad. Its stainless steel construction gives you a non-rusting, high luster finish for your braking and clutch needs.

NOTE: Trim plate only works on top of Wilwood's rubber brake pedal cover.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood's Pedal Pivot Bolt Kit contains Pedal Pivot, Pivot Bolt and Shim Washers.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Floor Mount Pedal Replacement Kit includes the Adjustable Brake pedal & balance bar assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio. Also Included with this assembly: clevis hardware required in the conversion. 340-16397 kits will convert the following 6 to 1 ratio floor mount assemblies: 340-1285 and 340-13831.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount 2.00" Offset Clutch Pedal Replacement Kit includes the Adjustable Clutch pedal assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly is clevis hardware required in the conversion. 340-16352 kits will convert the following 6.25 to 1 ratio forward mount assemblies: 340-11295 and 340-3950.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount Pedal Replacement Kit includes the Adjustable Brake pedal & balance bar assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly: clevis hardware required in the conversion. 340-16401 kits will convert the following 5.1-6.25 to 1 ratio forward mount assemblies: 340-11295 and 340-3950

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount Pedal Replacement Kit includes the Adjustable Brake pedal & balance bar assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio. Also Included with this assembly: clevis hardware required in the conversion. 340-16403 kits will convert the following 7 to 1 ratio forward mount assemblies: 340-1287 and 340-13832

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Forward Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: Clevis and clevis pins required in the conversion. 340-12043 kits will convert the following forward mount assemblies 340-3950, 340-6916

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Reverse Mount Pedal Replacement Kit includes the Adjustable Brake pedal & balance bar assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly: trunnion, clevis hardware required in the conversion. 340-16399 kits will convert the following 5.1-6.25 to 1 ratio reverse mount assemblies: 340-11299,340-12509,340-13835,340-13836,340-13837,340-3342,340-4828, 340-5180,340-5181 and 340-6451.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Pedal Accessories

Pedal Accessories

Wilwood’s new Adjustable Reverse Mount Pedal Replacement Kit includes the brake and clutch pedals together, with the appropriate hardware to retrofit earlier design cast pedal assemblies. Pedals feature an all aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. 340-12044 pedal kit will convert the reverse pedal assembliy 340-3342.

Ordering Information for Pedal Accessories
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1
$119.62
340-16397
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16399
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1
$119.62
340-16401
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$119.62
340-16412
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT CLUTCH,2.00 OFF,ADJ RATIO,5.50-6.25:1
$123.61
340-16352
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,FORWARD MT DUAL PEDAL
$148.92
340-12043
Call (805) 388-1188
Details
KIT,PEDAL REPLACEMENT,FORGED,REVERSE MT DUAL PEDAL
$138.52
340-12044
Call (805) 388-1188
Details
BRACKET KIT,PLATE,ADAPTER,PEDAL BASE/ TANDEM M/C
$57.09
250-3677
Call (805) 388-1188
Details
THROTTLE LINKAGE,FLOOR MT PEDALS
$150.64
340-12412
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY,W/TUBE
$76.15
340-1757
Call (805) 388-1188
Details
BALANCE BAR,ASSEMBLY
$66.73
340-4745
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER
$11.19
330-15726
Call (805) 388-1188
Details
PAD,BRAKE PEDAL,COVER,TRIM PLATE
$10.32
330-15727
Call (805) 388-1188
Details
PAD,BRAKE,PEDAL,COVER,W/TRIM PLATE
$18.69
330-15866
Call (805) 388-1188
Details
KIT,PEDAL HEAD,ADJUSTABLE
$29.92
330-16368
Call (805) 388-1188
Details
KIT,PEDAL,PAD,ADJUSTABLE
$20.71
330-14505
Call (805) 388-1188
Details
BOLT KIT,PEDAL,PIVOT,W/SHIMS
$11.92
230-17422
Call (805) 388-1188

Remote Bias Adjuster

Remote Bias Adjuster

Wilwood’s Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special bi-directional detente control providing the driver with positive adjustment feedback. The special five foot cable and housing (which can be cut to any length for a custom fit) provides an optimum bending radius for easy installation and smooth performance in tight confines. The assembly comes with two label faces for either front-to-rear or rear-to-front adjustment. Standard 3/8-24 thread fits Wilwood and most commonly used balance bars.

Ordering Information for Remote Bias Adjuster
Details
REMOTE BRAKE BIAS ADJUSTER
$59.25
340-4990
Call (805) 388-1188

60 Degree Mount Pedal

60 Degree Mount Pedal

This lightweight 1.8-pound unit is ideal for Sprint Cars, Midgets, Dirt Modifieds, or any application where the master cylinders must be mounted remotely from the pedal. This unit features a variable leverage, machined billet pivot arm that multiplies input force on average by 1.5:1 - a 5:1 pedal becomes 7.5:1, 6:1 becomes 9:1. To accommodate fitment where space is at a premium, the master cylinders are mounted one above the other, twisted 60 degrees with remote fluid reservoirs. The balance bar incorporates a positive detent stop each complete turn to maintain setting and facilitate on-track driver adjustment.

Wilwood's Remote Mount Pedal uses a pin and clevis pushrod attachment system that provides the highest possible degree of misalignment angle for bind-free operation through the entire range of travel. It gives precision bias adjustment, control, and fine-tuning on race vehicles equipped with dual brake master cylinder systems and proportionally sized calipers. When mounted within the driver's reach, the included adjustment knob can be used for quick and easy bias adjustments, or a remote adjuster cable can be attached.

Ordering Information for 60 Degree Mount Pedal
Details
PEDAL ASSEMBLY,DUAL M/C,60 DEG,REMOTE
$242.49
340-4630
Call (805) 388-1188

60 Degree Mount Tru-Bar Pedal

60 Degree Mount Tru-Bar Pedal

This Tru-bar unit is ideal for Sprint Cars, Midgets, Dirt Modifieds, or any application where the master cylinders must be mounted remotely from the pedal. This unit features a variable leverage, machined billet pivot arm that multiplies input force on average by 1.5:1 - a 5:1 pedal becomes 7.5:1, 6:1 becomes 9:1. To accommodate fitment where space is at a premium, the master cylinders mount one above the other, twisted 60 degrees with remote fluid reservoirs. When mounted within the driver's reach, the included knob can adjust bias on track quickly and easily.

Wilwood's Remote Mount Tru-Bar pedal utilizes a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments to deliver professional, championship caliber braking performance. A larger diameter 7/16-20 bar is more rigid and provides quicker adjustment, with a 3/8" diameter end that works with standard remote adjuster cables. It provides the ultimate in precision bias adjustment, control, and fine-tuning on race vehicles equipped with dual brake master cylinder systems and proportionally sized calipers.

Ordering Information for 60 Degree Mount Tru-Bar Pedal
Details
PEDAL ASSEMBLY,DUAL M/C,60 DEG,REMOTE TRUNNION
$317.95
340-14380
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms. The brake pedal uses a 6.25:1 ratio arm, but with a shorter 5.1:1 ratio arm on the clutch pedal for additional clearance when necessary. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size. .

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 5.1:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 5.1:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal

Reverse Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6.25:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REAR MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11299
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 ADJUSTABLE,DUAL M/C
$204.37
340-12509
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1 TRIPLE M/C,FORGED PEDAL
$281.85
340-13835
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5:1 CLUTCH,FORGED PEDAL
$281.85
340-13836
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C,FORGED PEDAL
$204.37
340-13837
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16385
Call (805) 388-1188

Reverse Swing Mount Brake Pedal-Adj Ratio

Reverse Swing Mount Brake Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Brake Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$247.92
340-16387
Call (805) 388-1188

Reverse Swing Mount Clutch / Brake Pedal

Reverse Swing Mount Clutch / Brake Pedal

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a reverse position inside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 6;1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.

Ordering Information for Reverse Swing Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,6:1,CLUTCH ADJUSTABLE
$111.33
340-13574
Call (805) 388-1188

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJ RATIO,5.5-6.25:1,TRUNNION
$598.06
340-16386
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$421.47
340-15076
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio and 5;1 clutch. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$498.94
340-15075
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$421.47
340-15077
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal

Reverse Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$498.94
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$421.47
340-15076
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$421.47
340-15077
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal

Reverse Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$421.47
340-15076
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$421.47
340-15077
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio

Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$505.22
340-16388
Call (805) 388-1188

Swing Mnt Tandem Brake and Offset Clutch Pedal

Swing Mnt Tandem Brake and Offset Clutch Pedal

Adjustable ratio brake pedal with offset clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and tandem brake master cylinder mount to the assembly through the firewall. The non-skid waffled pedal pads can be laterally adjusted to be from 5 to 7 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. The clutch pedal accepts a 2.25 inch vertical mount flange single outlet master cylinder, while the brake uses a 3.25 inch horizontal mount flange tandem master cylinder, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mnt Tandem Brake and Offset Clutch Pedal
*New* Details
PEDAL ASSY,TANDEM W/SINGLE M/C,FWD MT BRAKE W/2.00 OFF CLUTCH,ADJ 5.50-6.25:1
$294.42
340-16833
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal

Swing Mount Brake and Clutch Pedal

This swinging mount pedal assembly combines the brake and clutch pedals in one unit with the master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged 6.25:1 ratio pedal arms. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Swing Mount Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,HD,6.25:1 ADJUSTABLE,TRIPLE M/C
$281.85
340-11295
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5.1:1,TRIPLE M/C (OBSOLETE)
$224.50
340-4828
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C (OBSOLETE)
$224.50
340-3342
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TRIPLE M/C (OBSOLETE)
$224.50
340-3950
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1 BRAKE 5.0:1 CLUTCH (OBSOLETE)
$224.50
340-6451
Call (805) 388-1188
Details
PEDAL ASSEMBLFORWARD MT,STEEL,PEDALS,6:1 TRIPLE M/C (OBO)
$312.37
340-6916
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$339.76
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16382
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal with offset clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 5 to 7 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$339.76
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$339.76
340-16382
Call (805) 388-1188

Swing Mount Brake Pedal

Swing Mount Brake Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 10:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size.

Ordering Information for Swing Mount Brake Pedal
Details
PEDAL ASSEMBLY,7:1,DUAL,M/C (OBSOLETE)
$139.75
340-1287
Call (805) 388-1188
Details
PEDAL ASSEMBLY,7:1,DUAL,M/C,FORGED PEDAL
$162.12
340-13832
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C (OBSOLETE)
$170.02
340-5181
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5.1:1,DUAL M/C (OBSOLETE)
$170.02
340-5180
Call (805) 388-1188
Details
PEDAL ASSEMBLY,10:1,DUAL M/C,FORGED PEDAL
$199.51
340-15677
Call (805) 388-1188

Swing Mount Brake Pedal

Swing Mount Brake Pedal

This swinging mount pedal assembly mounts two single outlet brake master cylinders in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and driver awareness. A pin and clevis pushrod attachment system provides highest possible degree of misalignment angle for bind free operation through the entire range of travel. The balance bar can be locked in place with the included jam nut, or used with an optional remote cable for quick on-track adjustments. This pedal accepts any Wilwood vertical mount flange single outlet master cylinders that are ordered separately by style and bore size

Ordering Information for Swing Mount Brake Pedal
Details
PEDAL ASSEMBLY,7:1,DUAL,M/C (OBSOLETE)
$139.75
340-1287
Call (805) 388-1188
Details
PEDAL ASSEMBLY,7:1,DUAL,M/C,FORGED PEDAL
$162.12
340-13832
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C (OBSOLETE)
$170.02
340-5181
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5.1:1,DUAL M/C (OBSOLETE)
$170.02
340-5180
Call (805) 388-1188
Details
PEDAL ASSEMBLY,10:1,DUAL M/C,FORGED PEDAL
$199.51
340-15677
Call (805) 388-1188

Swing Mount Brake Pedal-Adjusatble Ratio

Swing Mount Brake Pedal-Adjusatble Ratio

Adjustable ratio balance bar brake pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference.The pedal feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake Pedal-Adjusatble Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FORWARD MT ADJUSTABLE RATIO,6.25-7:1
$198.32
340-16379
Call (805) 388-1188

Swing Mount Clutch / Brake Pedal

Swing Mount Clutch / Brake Pedal

This swinging mount pedal assembly mounts a single brake or clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with a high strength reinforced I-Beam style forged 7:1 ratio pedal Arm. The non-skid waffled pedal pad can be laterally adjusted for driver preference or clearance as necessary. This pedal accepts any Wilwood vertical mount flange single or tandem outlet master cylinder. Horizontal mount flange master cylinders require an adapter kit. Master cylinders are ordered separately by style and bore size.

Ordering Information for Swing Mount Clutch / Brake Pedal
Details
PEDAL ASSEMBLY,7:1,SINGLE,M/C,ALUMINUM BASE (OBSOLETE)
$79.29
340-1290
Call (805) 388-1188
Details
PEDAL ASSEMBLY,7:1,SINGLE,M/C,ALUMINUM BASE,FORGED PEDAL
$107.34
340-13834
Call (805) 388-1188

Swing Mount Clutch / Brake Pedal-Adjustable Ratio

Swing Mount Clutch / Brake Pedal-Adjustable Ratio

Adjustable ratio single clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Clutch / Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,SINGLE M/C,CLUTCH/BRAKE FORWARD MT,ADJUSTABLE RATIO,6.25-7:1
$147.17
340-16381
Call (805) 388-1188

Swing Mount Tandem Brake and Clutch Pedal

Swing Mount Tandem Brake and Clutch Pedal

Wilwood's new Swing Mount Tandem Brake and Clutch Assembly simplifies installing a tandem outlet, single pushrod brake master cylinder in conjunction with a hydraulic clutch master cylinder in a forward position outside the firewall. It features a lightweight aluminum frame, with high strength reinforced I-Beam style forged pedal arms in either 6.25:1 or 7.00:1 ratios. The non-skid waffled pedal pads can be laterally adjusted for driver preference or clearance as necessary. Will fit most tandem cylinders available with 3.25 horizontal bolt spacing. Pedal base has additional mount points for vertical mount 2.50” spacing tandem master cylinders using 5/16-18 studs (not supplied with pedal assembly). Clutch master cylinder mount is also a 2.25” vertical mount and will use most popular single outlet cylinders.

Ordering Information for Swing Mount Tandem Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TANDEM MASTER/CLUTCH
$242.47
340-14360
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FORWARD MT,7:1,TANDEM MASTER/CLUTCH
$242.47
340-14361
Call (805) 388-1188

Swing Mount Tandem Brake and Clutch Pedal-Adj Rt

Swing Mount Tandem Brake and Clutch Pedal-Adj Rt

Adjustable ratio brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. A clutch master cylinder and tandem brake master cylinder mount to the assembly through the firewall. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference.The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts a 2.25 inch vertical mount flange single outlet master cylinder for the clutch, and a Wilwood 3.25 inch horizontal flange tandem master cylinder for the brakes, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Tandem Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,TANDEM W/SINGLE M/C,FWD MT,BRAKE/CLUTCH,ADJ RATIO,6.25-7:1
$294.42
340-16384
Call (805) 388-1188

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Adjustable ratio Tru-Bar balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FWD MT,BRAKE/ CLUTCH,ADJ RATIO,5.5-6.25:1,TRUNNION
$598.06
340-16383
Call (805) 388-1188

Swing Mount Tru-Bar Brake and Clutch Pedal

Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TRIPLE M/C,TRUNNION
$498.94
340-15072
Call (805) 388-1188

Swing Mount Tru-Bar Brake Pedal

Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,7:1,DUAL M/C,TRUNNION
$379.20
340-15079
Call (805) 388-1188

Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio

Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio

Adjustable ratio Tru-Bar balance bar brake pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly through the firewall, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FORWARD MT ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$457.94
340-16380
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s 60 Degree Mount Tru-Bar Pedal Replacement Lever Kit includes the Tru-Bar Brake Lever & trunnion assembly with the appropriate hardware to retrofit earlier design 60 degree pedal assemblies with standard balance bars. Levers feature an billet aluminum construction. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-14479 kits will convert the 340-4630 60 degree pedal assemblies.

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Floor Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio. Also Included with this assembly: trunnion, clevis hardware required in the conversion. 340-16398 kits will convert the following 6 to 1 ratio floor mount assemblies: 340-1285, 340-13831 and 340-15078

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Forward Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-14922 kits will convert the following 7 to 1 ratio reverse mount assemblies:, 340-1287 and 340-13832

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Forward Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly: trunnion, clevis hardware required in the conversion. 340-16402 kits will convert the following 5.1-6.25 to 1 ratio forward mount assemblies: 340-11295,340-15072,340-16350,340-16382,340-16383 and 340-3950

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Forward Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio. Also Included with this assembly: trunnion, clevis hardware required in the conversion. 340-16402 kits will convert the following 7 to 1 ratio forward mount assemblies: 340-1287,340-13832,340-15079 and 340-16379.

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-15151 kits will convert the following 5.00 to 1 ratio reverse mount assemblies: 340-4828, 340-5180, 340-13835 and 340-13837.

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies with standard balance bars. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads are of special adjustable design that allows fine-tuning of the pedal location and clearance. Included with this assembly: trunnion, clevis hardware required in the conversion. 340-15152 kits will convert the following 6.25 to 1 ratio reverse mount assemblies: 340-3342, 340-5181, 340-6451, 340-11299 and 340-13836.

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Pedal Kit, Tru-Bar Brake

Pedal Kit, Tru-Bar Brake

Wilwood’s new Tru-Bar Reverse Mount Pedal Replacement Kit includes the Tru-Bar Brake pedal & trunnion assembly with the appropriate hardware to retrofit earlier design forged or cast pedal assemblies. Pedals feature an all-aluminum frame and forged aluminum pedal arms with ladder style construction. Pedal pads and pedal head are of special adjustable design that allows fine-tuning of the pedal location and clearance. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio. Also Included with this assembly: trunnion, clevis hardware required in the conversion. 340-16400 kits will convert the following 5.1-6.25 to 1 ratio reverse mount assemblies: 340-11299,340-12509,340-13835,340-13836,340-13837,340-15073,340-15074,340-15075,340-15076,340-15077, 340-3342,340-4828, 340-5180,340-5181 and 340-6451.

Ordering Information for Pedal Kit, Tru-Bar Brake
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FLOOR MT,ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$338.62
340-16398
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16400
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$338.62
340-16402
Call (805) 388-1188
*New* Details
KIT,PEDAL REPLACEMENT,DUAL BRAKE,FORWARD MT,ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$338.62
340-16413
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,7:1,FORWARD MT
$294.45
340-14922
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,5:1,REVERSE MT
$294.45
340-15151
Call (805) 388-1188
Details
KIT,PEDAL,REPLACEMENT,TRUNNION,DUAL BRAKE,6.25:1,REVERSE MT
$294.45
340-15152
Call (805) 388-1188
Details
KIT,LEVER ASSEMBLY,RETROFIT,DUAL M/C,60 DEG,REMOTE,TRUNNION
$151.92
340-14479
Call (805) 388-1188

Rod End and Spacer Kit

Rod End and Spacer Kit

Replacement Rod End and spacer kit for Tru-bar pedals. Contains 2 quantity 330-13830 Female Rod Ends, 2 quantity 330-13990 Trunnion Pedal Spacers in a convenient kit.

Ordering Information for Rod End and Spacer Kit
Details
KIT,ROD ENDS/SPACER,REPLACEMENT FOR TRUNNION PEDALS
$43.23
340-15595
Call (805) 388-1188

Universal Tandem Mount Balance Bar Assembly

Universal Tandem Mount Balance Bar Assembly

Wilwood’s Tandem Mount Balance Bar Assembly bolts in place of a typical horizontal bolt pattern tandem master cylinder and provides a sturdy mounting location for two race-type vertical bolt pattern master cylinders, with no custom fabrication needed. Providing The ultimate in brake bias control for performance and race vehicles is an adjustable balance bar with dual master cylinders. Ideal for modified street cars/trucks needing fast and easy brake bias adjustability to optimize braking for different performance driving situations and skillsets.

Ordering Information for Universal Tandem Mount Balance Bar Assembly
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY
$237.58
340-16920
Call (805) 388-1188
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY W/EYELET
$253.78
340-16928
Call (805) 388-1188

Universal Tandem Mount Balance Bar Assy w/Eyelet

Universal Tandem Mount Balance Bar Assy w/Eyelet

Wilwood’s Tandem Mount Balance Bar Assembly bolts in place of a typical horizontal bolt pattern tandem master cylinder and provides a sturdy mounting location for two race-type vertical bolt pattern master cylinders, with no custom fabrication needed. Providing The ultimate in brake bias control for performance and race vehicles is an adjustable balance bar with dual master cylinders. Ideal for modified street cars/trucks needing fast and easy brake bias adjustability to optimize braking for different performance driving situations and skillsets.

Ordering Information for Universal Tandem Mount Balance Bar Assy w/Eyelet
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY
$237.58
340-16920
Call (805) 388-1188
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY W/EYELET
$253.78
340-16928
Call (805) 388-1188



PDFs found: 43

Wilwood Disc Brakes Wins Best New Products Award at SEMA 2017

Wilwood’s new Tandem Brake and Hydraulic Clutch Pedal Kit received a Best New Products Award in the Street Rod/Custom Car Product category at the 2017 SEMA trade show in Las Vegas.

Wilwood is pleased to announce a new road race brake kit for 1997-2013 Corvettes

Wilwood’s championship winning road race brake systems for 1997-2013 Corvettes have been upgraded and fortified with the newly released Aerolite Quick-Silver 6R/ST racing calipers. The Aerolite calipers feature an all new, highly efficient, weight saving forged body design. It provides an overall increase in caliper stiffness and resistance to deflection and body separation under high load, and the high pressures generated by the OE power brake system. The new calipers also use thicker 20mm pads that reduce the heat saturation rate and increase the interval time between pad service cycles. Improved pedal feel, immediate and confident response, and longer pad cycle times will keep you and your Corvette on track longer and racing to the front of the pack.

Wilwood is pleased to announce a new road race brake kit for 2005-2014 Ford Mustang

Wilwood’s championship winning road race brake systems for 2005-2014 Ford Mustangs have been upgraded and fortified with the newly released Aerolite Quick-Silver 6R/ST racing calipers. The Aerolite calipers feature an all new, highly efficient, weight saving forged body design. It provides an overall increase in caliper stiffness and resistance to deflection and body separation under high load, and the high pressures generated by the OE power brake system. The new calipers also use thicker 20mm pads that reduce the heat saturation rate and increase the interval time between pad service cycles. Improved pedal feel, immediate and confident response, and longer pad cycle times will keep you and your Mustang on track longer and racing to the front of the pack

Wilwood Announces New Road Race Brake Kits for 1993-2002 Camaro and Firebird

Wilwood Disc Brakes has configured two new front disc brake kits for 1998-2002 Camaros and Firebirds, or 1993-97 cars that have been upgraded with 1998-02 spindles. Four piston forged Superlite 4R/ST nickel finish Quick-Silver calipers, PolyMatrix race pads, and two-piece Spec 37 alloy 13.06” directional vane rotors, are combined in these easy bolt-on kits to meet rules in NASA’s Camaro / Mustang Challenge, American Iron, American Iron Express, and other similar sanctions using 17” or larger wheels. The calipers are volume matched to original equipment power brake system output, and can easily be matched to common master cylinder sizes on manual balance bar pedals

Wilwood Disc Brakes Announces New Corvette Road Race Lug Drive Brake Kits

Wilwood's Racing division has announced the release of three new road race kits for 1997 – 2013 Corvette models C5, C6, and Z06. Complete bolt-on kits feature Wilwood's new Lug Drive floating rotor system that removes all thermally generated stress from a traditional hat and ensures optimal pedal feel.

Wilwood Disc Brakes Releases Street and Track Big Brake Kits for 2013-20 Honda Civic

Wilwood has added two new big brake kits for the 2013-2020 Honda Civic featuring Superlite calipers and 12.88” (327mm) rotors. More than 1-inch in diameter larger than stock, and manufactured using proprietary Spec37 iron, these rotors deliver more brake torque and resist distortion from extreme heat. Motorsports-proven Superlite calipers have less deflection so more pedal effort is directly converted to clamping force.

Wilwood Disc Brakes Releases Street and Race Kits for Mazda MX-5 Miata ND

The 2016-23 Mazda MX-5 Miata ND is a fun, lightweight sports car, but the factory brakes left room for improvement. Wilwood’s motorsports-proven Dynapro forged aluminum, four piston radial mount calipers deliver improved stopping power with less deflection and a more consistent pedal feel. The 11.00” x 0.81” (280mm x 21mm) GT slotted rotors are machined from proprietary Spec37 iron alloy with 72 internal cooling vanes.

Wilwood Disc Brakes Releases Rear Drum-to-Disc Brake Conversion Kits for GM C1500

Wilwood has released new brake kit options for rear drum-to-disc conversions for GM C1500 Silverado, Sierra, and similar SUVs. Complete bolt-on brake kits provide an upgrade to make trucks safer with improved stopping power. Experience more clamping force, better thermal capacity, and improved pedal feel for more confident braking in daily street performance to heavy-use applications including, hauling, towing, off-road, and commercial workloads.

Wilwood Disc Brakes Introduces new Master Cylinder Firewall Mounting Kit

Wilwood Disc Brakes is proud to introduce a new billet aluminum Master Cylinder Firewall Mounting Kit, part number 250-13167. This mounting kit is specifically designed to work in conjunction with Wilwood’s Forward Mount Brake and Clutch Pedal Assembly and Flange Mounted Compact Remote Master Cylinders.

Wilwood Disc Brakes Announces a new 15/16” Bore Tandem Chamber Master Cylinder

Wilwood’s 15/16” bore tandem master cylinder provides a new option for matching cylinder output to caliper capacity with custom brake upgrades on single pushrod, manual pedal brake systems

Wilwood Engineering's New Residual Pressure Valves

Wilwood’s next generation Residual Pressure Valves (RPV) deliver the same outstanding performance and reliability as their previous versions but in a sleek new, fully detail-machined design. The valves are available with 2 or 10 pound pressure ratings to maintain minimal line pressure and prevent excessive pedal travel during initial engagement on disc or drum brake systems. Valves with 1/8”-27 NPT female ports are available individually, or packaged with two 3/8”-24 inverted flare female adapter fittings to accommodate 3/16” double flared hard lines. The valves are precision machined from billet aluminum and color coded with red or blue bright anodizing for easy identification.

Wilwood Disc Brakes Announces a new 15/16" Bore Tandem Master Cylinder for Mustangs

Wilwood’s Tandem Master Cylinders provide a new option for matching cylinder output to caliper capacity with custom brake upgrades on single-pushrod, manual pedal brake systems. The high-capacity body is lightweight, adds high-tech style and has durability for the street or track. The machined billet lid captures a pressure-balancing bellows gasket that fully seals moisture out and keeps fluid in.

Wilwood Disc Brakes Launches C2 Corvette Tandem Master Cylinders

Wilwood’s Compact Tandem Master Cylinders have been re-engineered, with the correct pushrod length and clevis thread size, for direct mounting to the original equipment pedal on all 1963-67 C2 model Corvettes with manual brakes.

Wilwood Disc Brakes Releases Starlite 55XD Lug-Drive Wide 5 Race Hubs

Wilwood Racing has engineered an innovative new Lug-Drive dynamic-mount rotor system specifically for the lighter, stronger Starlite 55XD Wide 5 hubs. The 55XD design shaves weight by mounting the forged aluminum rotor adapter closer to the hub’s reinforced center using fewer mounting bolts. The new Lug-Drive system simplifies rotor mounting using a snap ring in place of bolts and safety wire, allowing it to float and heat cycle without distortion for a more consistent pedal feel and longer life.

Wilwood Disc Brakes Announces New XR Race-Only Brake Fluid

Wilwood’s new XR Race-Only* Brake Fluid is the same extreme high-temperature fluid used in the most demanding race series, including Formula 1, World Rally Championship, FIA World Endurance, and Moto GP. XR Brake Fluid is formulated to deliver the absolute best, most consistent pedal feel, start to finish, even in the most adverse racing conditions.

Wilwood Disc Brakes Releases Lug-Drive Rotor Adapters for Wide 5 and 5x5 Race Hubs

Wilwood Racing has engineered an innovative new Lug-Drive dynamic-mount rotor system specifically for race cars using Wide 5 and 5x5 hubs. The new floating rotor Lug-Drive system simplifies assembly with a single snap ring in place of rotor bolts and safety wire. The floating rotor eliminates heat distortion from thermal expansion for a more predictable pedal feel and extended pad and rotor life.

Wilwood is pleased to announce a new universal / adjustable brake pedal pushrod kit

Wilwood’s new brake pedal pushrod kit provides the last missing link when installing a custom or modified brake system. The kit includes several options for adjustable length rods, with the commonly found connection end hardware necessary to connect Original Equipment and aftermarket pedals to all common types of manual master cylinders and power brake boosters

Wilwood’s New Swing Mount Pedal and Triple Master Cylinder Assemblies

If you are building a racecar, street rod or Pro Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

Wilwood’s New Swing Mount Pedal and Triple Master Cylinder Assemblies

If you are building a racecar, street rod or Pro-Touring vehicle you should be aware of Wilwood’s new Adjustable Reverse Mount Pedal assembly or the new Forward Mount Pedal Assembly that combines the brake and clutch pedals together in one unit.

Wilwood Disc Brakes Introduces New Floor Mount Triple Pedal Assembly

This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-12411 is for front engine cars.

Wilwood Disc Brakes introduces new swing mount pedal and dual master cylinder assembly

If building a racecar, street rod, or Pro-Touring vehicle, Wilwood’s has a new Adjustable Reverse Mount Adjustable Pedal assembly with two master cylinders positioned inside the firewall and away from engine heat

Wilwood introduces new Reverse Mount Swing 6:1 Single Pedal Assembly

Wilwood’s new Reverse Mount Swing Pedal Assembly, part number 340-13574 can be used as a clutch or brake pedal. Pedal features a lightweight aluminum frame with a super strong I-beam design forged aluminum pedal, and a laterally adjustable, non-slip waffled foot pad.

Wilwood Disc Brakes Introduces New Line of Forged Aluminum Pedal Assemblies

Wilwood Disc Brakes has expanded their pedal line with all new, lightweight, super-strong, forged aluminum pedal assemblies. The pedals are built around a forged I-Beam arm design incorporating a laterally adjustable, non-slip waffled foot pad. Wilwood’s full range of single, dual, and triple cylinder mount models has been duplicated, along with a new reverse swing mount single cylinder model.

Wilwood Tandem Brake and Hydraulic Clutch Master Cylinder Pedal Assembly

Wilwood’s two newest pedal assemblies simplify the installation of tandem outlet brake master cylinders in vehicles also equipped with a hydraulic clutch.

Wilwood Disc Brakes Introduces New Tru-Bar 60 Degree Remote Pedal Master Cylinder Mount

Wilwood’s Tru-Bar 60 Degree Master Cylinder Mount for remote brake pedal applications utilizes a fixed trunnion bearing within the pivot lever and pushrod spherical bearing ends. This provides smooth operation and precise adjustment of the brake bias with zero chance of balance migration, eliminating all side play.

Wilwood Disc Brakes Announces New Inline Dual Cylinder Cutting Brake Assembly

Wilwood’s Dual Cylinder Inline Cutting Brake assembly utilizes a single inlet, twin outlet flow-through master cylinder to simplify plumbing of the existing calipers and deliver precise steering-brake control for all types of off-road competition vehicles.

Wilwood Disc Brakes Announces New Hydraulic Handbrake Levers

Wilwood's new hydraulic handbrake lever assemblies provide a lightweight, high-leverage component for drift cars, drag race cars, rally cars, or any application where hand-actuation of one or more brake calipers is employed.

Wilwood Engineering’s New Tru-Bar Balance Bar Pedal System

Wilwood’s Tru-Bar balance bar system is now available in the eight popular pedal styles used in virtually all types of competition applications. Tru-Bar pedals utilize a fixed-trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control and adjustment of the brake bias on race-prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance.

Wilwood Disc Brakes Releases Adjustable Ratio Pedal Assemblies

Wilwood’s new forged aluminum pedals now offer multiple leverage ratios in a single unit via a height-adjustable pedal pad. This new design allows fine-tuning of pedal ratio, effort, feel, and ergonomics to the driver’s preference in forward or reverse swing and floor mounts, tandem or dual master cylinders, and individual pedal or clutch/brake and throttle combinations.

Wilwood Disc Brakes Releases Tru-Bar Adjustable Race Pedal Assemblies

Wilwood Racing’s new forged aluminum race pedals now adjust for leverage ratio, plus horizontal pad placement. The innovative design allows vertical pedal pad adjustment for fine-tuning pedal feel and performance. Combined with Wilwood’s precision front-to-rear bias control Tru-Bar trunnion system, these pedals are like no other.

Wilwood Disc Brakes Releases Tandem Mount Balance Bar Assembly

For the ultimate control on the street or track, dual master cylinders with an adjustable balance bar allow brake bias to be fine-tuned to conditions and driver preference. Wilwood’s new solution is the Tandem Mount Balance Bar Assembly, giving modified street cars and trucks the precision-control usually reserved for race vehicles. This lightweight, forged billet aluminum assembly bolts to the firewall, replacing the tandem master cylinder with a balance bar and dual master cylinder mounts.

Floor Mount Triple Pedal Assembly

This floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and part number 340-12411 is for front engine cars. Both units feature an aluminum frame with strong lightweight fabricated steel pedal arms.

Data Sheet: ds907.pdf

PEDAL ASSEMBLY, FLOOR MOUNT, BRAKE / CLUTCH / GAS

Data Sheet: ds1213.pdf

FORWARD MOUNT TANDEM MASTER CYLINDER BRAKE AND CLUTCH DUAL PEDAL ASSEMBLY

Data Sheet: ds1102.pdf

TRU-BAR BALANCE BAR BRAKE PEDAL INSTALLATION AND ADJUSTMENT GUIDE

Data Sheet: ds1486.pdf

FORWARD FLOOR MOUNT BRAKE/CLUTCH/THROTTLE PEDALS - BALANCE BAR - 4.75:1-5.75:1 ADJ. RATIOS

Data Sheet: ds1487.pdf

FORWARD FLOOR MOUNT BRAKE/CLUTCH/THROTTLE PEDALS - TRU BAR - 4.75:1-5.75:1 ADJ. RATIOS

Data Sheet: ds252.pdf

BRAKE PEDAL AND BALANCE BAR INSTRUCTION GUIDE

Flyer: fl162.pdf

PRESSURE IN RELATION TO M/C BORE DIA & BRAKE PEDAL RATIO

Flyer: fl371.pdf

BRAKE PEDAL PUSHROD KIT

Flyer: fl449.pdf

BRAKE AND CLUTCH PEDAL WITH TANDEM MASTER CYLINDER BRAKE AND HYDRAULIC CLUTCH

Flyer: fl437.pdf

TRU-BAR 60 DEGREE REMOTE BRAKE PEDAL DUAL MASTER CYLINDER MOUNT

Flyer: fl390.pdf

TRU-BAR BALANCE BAR BRAKE PEDAL ASSEMBLIES


All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2024 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.05 June 23, 2023
​ ​