Search Wilwood Brake Kits

Brake Kits Found: 4
Number of Pistons
2
4
6
Rotor Diameter
Wheel Diameter*
Caliper Mount

*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.

Forged Dynapro 6 Big Brake Front Brake Kit (Hub)
Item No: 140-12946
Pistons: 6
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $1,175.99

Forged Dynapro 6 Big Brake Front Brake Kit (Hub) Description

DynaPro 6 forged billet calipers are combined with 12.19” diameter rotors for this group of traditional non-ABS spindles on American muscle cars and vintage rods. The enhanced brake capacity and pad performance of the six piston calipers provide an inter

Forged Dynalite Big Brake Front Brake Kit (Hub)
Item No: 140-12045
Pistons: 4
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $909.99

Forged Dynalite Big Brake Front Brake Kit (Hub) Description

FDL Big Brake Front Hub Kits provide the added advantage of larger diameter brake rotors for traditional non-ABS spindles on American muscle cars and vintage rods. Forged billet Dynalite calipers, 12.19” diameter rotors, and high performance Wilwood brake pads generate big brake stopping power to compliment wheel, tire, and suspension upgrades on all types of custom show and performance street / strip machines. A full range of options for caliper finish and rotor design provide custom builders with the ability to personalize the style and performance requirements of the mildest to the wildest machines.

Forged Dynalite Pro Series Front Brake Kit
Item No: 140-12040
Pistons: 4
Rotor Diameter: 11
Caliper Mount: Lug
Min. Wheel Diameter: 14
Axle Flange: 
Axle Offset: 
From: $853.99

Forged Dynalite Pro Series Front Brake Kit Description

FDL Pro-Series Front Hub Kits offer complete disc brake upgrade solutions for traditional non-ABS spindle applications on American muscle cars, vintage rods, and heavy weight drag cars. Based on the venerable forged billet Dynalite caliper, these versatile kits are easily optioned to suit the braking requirements and style preferences for a daily driver, serious competition, or the most discriminating show enthusiast. Most kits require no modifications for installation, and provide plenty of clearance inside popular 15” wheels. FDL Pro-Series kits can be used with either manual or power boost master cylinders.

D52 Front Caliper Kit
Item No: 140-11290
Pistons: 2
Rotor Diameter: 
Caliper Mount: Floating
Min. Wheel Diameter: 
Axle Flange: 
Axle Offset: 
From: $404.99

D52 Front Caliper Kit Description

Wilwood's D52 Front Caliper Kit is a direct bolt-on 2 piston replacement for the factory original single calipers on many 1968-96 GM Passenger Vehicles and Trucks. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE caliper design. D52 calipers provide low-maintenance performance and a huge weight savings with high temperature reliability for the street and track. D52 calipers mount in the stock location over stock rotors, use the original style OE D52 brake pads and an OE 7/16-20 banjo bolt brake line mounting. Calipers can be used with most wheels that clear the OE calipers. The front calipers with 2.00” piston provide 6.28 square inches of piston area per caliper, in order to maintain the original front to rear brake bias and use of the OE master cylinder. Kits contain Wilwood’s hardened slide pins and BP-10 high friction pads. Matching rear calipers are also available for custom installations. Vehicles 1978 & Up (with M10-1.5 banjo bolts) will require new brake lines available below.



*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.





Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved