Dynapro 6 Piston Lug Mount Caliper – Part No: 120-10135
Call (805) 388-1188
Dynapro Six Lug Mount
Prod #: 120-10135
Price: $299.93

Dynapro Six Lug Mount - Product Summary

Pistons
Piston Count 6
Piston Area (in²) 3.08
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width(in) 0.81
Rotor Diameter(in) 13.06
Pad Dimensions
Pad Area (in²) 7.3
Pad Volume (in³) 2.4
Duty Rating & Material
Material Aluminum
Weight(Lbs) 4.6
Colors & Finish
Color Black
Finish Black Powder Coat

Mounting
Mount Center(in) 5.25
Mount Position
Mount Side Left Hand
Mount Type Lug
Product Documents
Product Data Sheet

Click To Download
Installation Instructions


120-10135 - Product Description

Dynapro Six Lug Mount

The DP6 marks a noteworthy step in the evolution of the DynaPro caliper series. DP6 calipers offer the performance advantages of a larger pad and a six piston differential bore configuration, with complete bolt-on interchange ability to the four piston 5.25" lug mount DynaPro models, and the long standing Dynalite caliper series.

As with the previous DynaPro models, the strength of the DP6 is a combination of process and design. Premium grade alloy billets are stress-flow forged resulting in a highly efficient, high strength body. Stress flow forging re-aligns the internal grain structure of the metal within the contour of the caliper body. This process is proven to provide superior strength over any other process derived from castings or straight billet block machining. FEA assisted solid modeling design technology was employed to find the optimum balance between lightweight with superior strength against deflection and body separation under high load.

In addition to the sturdy, yet stylish body, the DP6 incorporates race proven technology and the latest Wilwood performance enhancements. Pad clamping force is generated by six heavy wall stainless pistons configured in a leading to trailing edge differential bore pattern. The heavy wall pistons have been re-engineered to fully resist backside deflection at high pressures while maintaining balanced pad loading for even wear over the length of the pad. Stainless steel resists corrosion while inhibiting direct heat transfer from the pads to caliper body, seals, and fluid. Two choices for overall piston volume provide options to match caliper size with master cylinder output and bias requirements.


Vehicle Applications
Driving Environment Street Rods
Vehicle Sub-Types
Application Duty Heavy Duty
Driving Environment Street Performance
Vehicle Sub-Types Domestic
Application Duty Heavy Duty
Driving Environment Street Performance
Vehicle Sub-Types Import
Application Duty Heavy Duty
Driving Environment Rally
Vehicle Sub-Types
Application Duty Medium Duty
Driving Environment Road Race
Vehicle Sub-Types
Application Duty Medium Duty
Driving Environment Late Model Dirt
Vehicle Sub-Types STARS, UMP, IMCA, etc...
Application Duty Heavy Duty
Driving Environment Drag Racing
Vehicle Sub-Types
Application Duty Heavy Duty
Driving Environment Northeast Modified
Vehicle Sub-Types Dirt or Pavement
Application Duty Medium Duty
Driving Environment Open Wheel
Vehicle Sub-Types Sprint, Midget, etc… Dirt or Pavement
Application Duty Medium Duty
Driving Environment Off Road
Vehicle Sub-Types
Application Duty Medium Duty
Driving Environment Industrial
Vehicle Sub-Types
Application Duty Medium Duty

Product Specifications

Rotor Compatibility
Rotor Width(in) 0.81
Maximum Rotor Width(in) 0.83
Minimum Rotor Width(in) 0.75
Maximum Rotor Diameter(in) 13.06
Minimum Rotor Diameter(in) 10

Brake Pad Specifications
Brake Pad Type 1 6712
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 7.3
Total Pad Volume (in³) 2.4
Mount
Piston Specifications
Piston 1 Bore(in) 1.38
Piston 2 Bore(in 1
Piston 3 Bore(in) 1
Piston 4 Bore(in)
Total Piston Area (in²) 3.08

Mounting Specifications
Mount Type Lug
Mount Side Left Hand
Mount Center(in) 5.25
Mount Hole Size(in) 0.39
Mount Height(in) 2.03
Inlet Thread Size 1/8-27 NPT
Pad Dimensions & Part Numbers
Mount Dimensions & Part Numbers

Additional Notes

The DP6 uses the upgraded type 6712 pad that provide the larger overall volume size from the previous Dynalite and DynaPro four-piston models. The pads are retaining with exclusive Wilwood Quick-E clips for simplified pad service and maintenance without caliper removal. Stainless steel SRS bridge plates are used to dampen engagement harmonics, eliminate pad rattle, and protect the caliper bridges from gouging by the pad edges. Four corner bleeds and internal fluid passages accommodate front or rear mounting and simplified gas evacuation regardless of mounting position.

Standard DP6 calipers feature a high gloss black finish. Bright polished, high gloss red, and other custom Wilwood colors can be ordered to add personalized style for custom applications.


Parts & Accessories

O-Ring Kit 130-10169
Replacement Dust Boot N-A
Replacement Piston 1 200-7518
Replacement Piston 2 200-12953
Replacement Piston 3 200-12953
Replacement Piston 4 N-A
Cross-Over O-Ring Kit 130-10540
Bridge Bolt Kit N-A
Wear Plate L/H 300-9707
Wear Plate R/H 300-9707
Pad Retainer 300-7316
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved