W4A Caliper – Part No: 120-11666-rs
Call (805) 388-1188
W4A Radial Mount
Prod #: 120-11666-RS
Price: $488.93

W4A Radial Mount - Product Summary
Caliper No: 120-11666-rs

Pistons
Piston Count 4
Piston Area (in²) 4.84
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width(in) 1.25
Rotor Diameter(in) 15
Pad Dimensions
Pad Area (in²) 11.1
Pad Volume (in³) 5.2
Duty Rating & Material
Material Aluminum
Weight(Lbs) 7.6
Colors & Finish
Color Black
Finish Black Powder Coat

Mounting
Mount Center(in) 7.09
Mount Position Rear Mount
Mount Side Left Hand
Mount Type Radial
Product Documents
Product Data Sheet

Click To Download
Installation Instructions


120-11666-rs - Product Description

W4A Radial Mount

The W4A forged four piston caliper delivers heavy duty stopping power for the road or track. The caliper incorporates race technology into a body design with widespread adaptability. Radial mounting, four options for piston volume, and a newly increased rotor diameter ranging from 12.19" to 15.00" give this caliper the versatility necessary to suit all types of heavy weight braking requirements.

The W4A body is the product of FEA computer design and stress flow forging technology. FEA technology allows the designer to test the prototype in a computer environment to determine the optimal structural design within the dimensional parameters of the component. Stress flow forging produces a part with the internal grain structure of the metal aligned in the direction of the flow of the body contour. The results are a caliper with superior clamping efficiency and ultimate strength against fatigue, stresses, and distortion under load.

The performance of the W4A is enhanced with SRS bridge plates, snap-ring locked pad retainer pins, recessed two-piece bleed screw assemblies and dampen mounted fluid transfer tubes. SRS bridge plates eliminate all bridge wear caused by pad gouging. The spring-loaded action of the plates also eliminates pad rattle. Snap ring clips lock the pad pins in place to provide positive retention and allow easy service without caliper removal. The bleed screws are recess mounted for protection against impact and debris. The fluid tubes are dampen mounted to protect them from fatigue or damage from vibration or debris. Calipers are anodized in high luster black to protect from corrosion and maintain their high-tech appearance. The W4A is also available with a gloss red finish or other custom Wilwood color by order.



Product Specifications

Rotor Compatibility
Rotor Width(in) 1.25
Maximum Rotor Width(in) 1.28
Minimum Rotor Width(in) 1.1
Maximum Rotor Diameter(in) 15
Minimum Rotor Diameter(in) 12.19

Brake Pad Specifications
Brake Pad Type 1 6617
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 11.1
Total Pad Volume (in³) 5.2
Mount
Piston Specifications
Piston 1 Bore(in) 1.88
Piston 2 Bore(in 1.62
Piston 3 Bore(in)
Piston 4 Bore(in)
Total Piston Area (in²) 4.84

Mounting Specifications
Mount Type Radial
Mount Side Left Hand
Mount Center(in) 7.09
Mount Hole Size(in) 0.45
Mount Height(in) 2.09
Inlet Thread Size 1/8-27 NPT
Pad Dimensions & Part Numbers
Mount Dimensions & Part Numbers

Additional Notes


Parts & Accessories

O-Ring Kit 130-5100
Replacement Dust Boot N-A
Replacement Piston 1 200-7521
Replacement Piston 2 200-7519
Replacement Piston 3 N-A
Replacement Piston 4 N-A
Cross-Over O-Ring Kit N-A
Bridge Bolt Kit N-A
Wear Plate L/H 300-5876
Wear Plate R/H 300-5876
Pad Retainer 180-9874
Bleed Screw Kit 220-6069
Self Bleeder Tube N-A
Cross-Over Tube 190-9875




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved