DPC56 Caliper – Part No: 120-13916-bk
Call (805) 388-1188
DPC56 Caliper
Prod #: 120-13916-BK
Price: $314.99
DPC56 Caliper - Product Summary
Caliper No: 120-13916-bk

Pistons
Piston Count 4
Piston Area (in²) 2.46
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width(in) 1.04
Rotor Diameter(in) 12
Pad Dimensions
Pad Area (in²) 5.1
Pad Volume (in³) 1.71
Duty Rating & Material
Material Aluminum
Weight(Lbs) 6.3
Colors & Finish
Color Black
Finish Black Powder Coat

Mounting
Mount Center(in) 5.04
Mount Position
Mount Side Universal
Mount Type Lug
Product Documents
Product Data Sheet

Click To Download
Installation Instructions

120-13916-bk - Product Description

DPC56 Caliper

DPC56 rear calipers are engineered as a high performance street and custom replacement for Corvettes and hot rods using Corvette suspension. DPC56 calipers add high-tech styling and provide the positive response and balanced pad loading provided by a fixed mount, four piston caliper. The DPC56 is a direct bolt-on replacement for the OE calipers on all models of the C5 from 1997 to 2004, and all base model C6’s from 2005 to 2013 using 12.00” diameter rear rotors. The calipers attach directly to the Corvette spindle without the need for brackets or adapters and accept all types of OE banjo bolt style brake hoses.

Using modern computer modeling and design technology, the DPC56 is based on the top performing DynaPro low profile caliper series. These calipers feature an ultra-high strength forged aluminum body, stainless steel pistons, internal piston damping springs, internal bore seals, stainless steel bridge wear plates, and a single screw bleed system. All DPC56 calipers accept the same type 4812 12mm thick brake pads as used in all low profile DynaPro series calipers.

The piston volume of the DPC56 is matched to the piston volume found in the OE calipers. This makes it fully compatible with the output of the OE master cylinder and the ABS system. Front to rear brake bias and pedal travel remain as stock. For custom hot rod builds, this caliper volume is also easily matched to other styles of manual or power brake pedals with proper master cylinder sizing.



Product Specifications

Rotor Compatibility
Rotor Width(in) 1.04
Maximum Rotor Width(in) 1.04
Minimum Rotor Width(in) 0.98
Maximum Rotor Diameter(in) 12
Minimum Rotor Diameter(in) 12

Brake Pad Specifications
Brake Pad Type 1 4812
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 5.1
Total Pad Volume (in³) 1.71
Mount
Piston Specifications
Piston 1 Bore(in) 1.25
Piston 2 Bore(in 1.25
Piston 3 Bore(in)
Piston 4 Bore(in)
Total Piston Area (in²) 2.46

Mounting Specifications
Mount Type Lug
Mount Side Universal
Mount Center(in) 5.04
Mount Hole Size(in)
Mount Height(in)
Inlet Thread Size M10 x 1.00
Pad Dimensions & Part Numbers
Mount Dimensions & Part Numbers

Additional Notes

DPC56 calipers are externally finished with a high gloss red or black protective powder coating process that is both brake fluid and heat resistant. Internally, all surfaces and passages are anodized to provide additional corrosion resistance with a durable wear surface for stainless pistons inside. DPC56 calipers will maintain their stylish good looks and rugged durability for many miles to come.

NOTE: DPC56 caliper kits have been checked to clear Z06 model wheels. All other OE production and aftermarket wheels should be checked for proper clearance prior to installation. Wheel spacers may be required on some applications. Please refer to the wheel clearance diagram for additional information on backdrop spacing and radial clearance requirements.


Parts & Accessories

O-Ring Kit 130-2479
Replacement Dust Boot N-A
Replacement Piston 1 200-7515
Replacement Piston 2 200-7515
Replacement Piston 3 N-A
Replacement Piston 4 N-A
Cross-Over O-Ring Kit 130-10540
Bridge Bolt Kit N-A
Wear Plate L/H 300-5875
Wear Plate R/H 300-5875
Pad Retainer N-A
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved