Saturday, December 10, 2016
Brake Pad Part No: 150-10547K

Brake Pad Guide Brake Pads Chart

Brake Pads
Street Performance / Racing Pads

Pad#:   D8
Compound:   BP-20
Wilwood Brake Pad Plate #D8

Wilwood Brake Pad Plate #D8
zoom image
<Go Back>

Call (805) 388-1188

Product Number: 150-10547K     Price: $78.53
Pad Dimensions
Thickness(in): Area(in²): Volume(in³): Beded:
.49 3.9 N
Temperature & Friction Ratings
Peak Temperture Rating: Peak Friction Rating:
1100 F. 0.55
Dust & Noise Ratings
Dust Production Rating: Pad Noise Rating:
Low to Moderate Low to Moderate

Performance Characteristics
  • Medium friction, highest effective temperarture range in medium temperature pad group.
  • Smooth engagement, torque curve increases in relation to temperature
  • Moderate wear rate at high temperature
  • Medium friction, highest effective temperarture range in medium temperature pad group.

Vehicle Applications
Driving EnvironmentVehicle Sub-TypesApplication Duty
Junior Dragster Heavy Duty
Street Rods  Heavy Duty
Street Performance DomesticHeavy Duty
Street Performance ImportHeavy Duty
Motorcycles Heavy Duty
Road Race Light Duty
Late Model Dirt STARS, UMP, IMCA, etc...Medium Duty
Drag Racing Heavy Duty
Open Wheel Sprint, Midget, etc… Dirt or PavementMedium Duty
Off Road Medium Duty
Kart Medium Duty
Power Sports ATV, SnowmobileMedium Duty

Pad Illustration and Dimensions
Wilwood Brake Pad Plate #D8 Large Drawing

Wilwood Brake Pad Plate #D8 Large Drawing


Compound Characteristics
BP-20

BP-20


Compound Data Sheet
Application:

  • Medium to heavy braking dirt tracks.
  • Advanced level track day and club sport competition.
  • Extreme duty dual-purpose street/track vehicle.
  • High speed or heavy weight drag cars.
  • Hobby or sportsman category asphalt racing
Characteristics:

  • High performance street compound with increased friction and a wider temperature range over BP-10.
  • Beds quickly and provides fast response without high rotor abrasion.
  • Baseline pad for track oriented street cars.
Compound Temperature Range & Torque Values
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.

Wilwood Compatible Calipers: Pad # D8
D8-4 Caliper Front
Wilwood D8-4 Caliper Front Caliper

Wilwood D8-4 Caliper Front Caliper
zoom image
D8-4 Caliper Front Caliper

D8-4 front calipers are a direct bolt-on replacement for the OE factory front calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high temperature seals put an end to the rust, bore pitting, and seal failures that plague the original cast iron caliper design. View D8-4 Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
4 5.56 0
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
3.9 1.25 11.75
D8-4 Caliper Rear
Wilwood D8-4 Caliper Rear Caliper

Wilwood D8-4 Caliper Rear Caliper
zoom image
D8-4 Caliper Rear Caliper

D8-4 rear calipers are a direct bolt-on replacement for the OE factory rear calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high temperature seals put an end to the rust, bore pitting, and seal failures that plague the original cast iron caliper design. View D8-4 Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
4 3.00 0
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
3.9 1.25 11.75
D8-6 Caliper Front
Wilwood D8-6 Caliper Front Caliper

Wilwood D8-6 Caliper Front Caliper
zoom image
D8-6 Caliper Front Caliper

D8-6 front calipers are a direct bolt-on 6 piston replacement for the OE factory 4 piston front calipers on all 1965-82 Corvettes. Forged billet aluminum bodies, stainless steel pistons, and high temperature seals put an end to the rust, bore pitting, and seal failures that plague the original cast iron caliper design. View D8-6 Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
6 5.51 0
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
3.9 1.25 11.75