Monday, December 05, 2016
Brake Pad Part No: 150-13675

Brake Pad Guide Brake Pads Chart

Brake Pads
Street Performance / Racing Pads

Pad#:   4209
Compound:   Not Specified
Wilwood Brake Pad Plate #4209

Wilwood Brake Pad Plate #4209
zoom image
<Go Back>

Call (805) 388-1188

Product Number: 150-13675     Price: $8.93
Pad Dimensions
Thickness(in): Area(in²): Volume(in³): Beded:
.34 0.9 0.31 N
Temperature & Friction Ratings
Peak Temperture Rating: Peak Friction Rating:
600 F.
Dust & Noise Ratings
Dust Production Rating: Pad Noise Rating:
Very Low Very Low

Performance Characteristics

Vehicle Applications

Pad Illustration and Dimensions
Wilwood Brake Pad Plate #4209 Large Drawing

Wilwood Brake Pad Plate #4209 Large Drawing


Compound Characteristics
Not Specified

Not Specified


Compound Data Sheet
Application:

  • Formulated for Power Sports, Industrial and Automotive Parking Brake applications.
Characteristics:

  • Medium -high friction compound with a flat torque and consistent response throughout the entire temperature range.
  • Less agressive alternative to A or H compounds.
  • Long wear rate for severe duty, sustained high-temperature braking.
  • Performs best when initially bedded on new rotors or used rotors that have only been run with J compound.
Compound Temperature Range & Torque Values
Temperature range and overall friction value are the primary considerations for pad selection. The pads must be capable of maintaining the proper amount of friction for stopping power within the temperatures that will be realized on the track during the event. Then, overall wear rate must be considered. For most asphalt and road race applications, compounds in the high temperature ranges over 1000°F range are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges, and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on track performance. If pad fade (friction loss) due to overheating occurs, then improved cooling, a heavier rotor, or a higher temperature range pad may all become necessary.

Wilwood Compatible Calipers: Pad # 4209
Mech Spot Caliper
Wilwood Mech Spot Caliper Caliper

Wilwood Mech Spot Caliper Caliper
zoom image
Mech Spot Caliper Caliper

Wilwood's single piston floating Mechanical Spot Caliper is compact,lightweight and widely used in Parking Brake, Karting, Sport Utility Vehicles and Light Industrial applications. Its two position, cam-actuated lever permits right or left, front or rear mounting, and accommodates two settings for leverage adjustment.The 1.2 pound Mechanical Spot fits rotors with diameters from 6.00” to 13.00”, thickness from .25” to .81", and is supplied with pads installed. The caliper is available black or polished finishes View Mech Spot Calipers
Caliper Dimensions
Piston Count: Piston Area Range (in²): Pad Area Range (in²):
0 0.00 0.9
Pad Volume Range (in³): Max Rotor Widths (in): Max Rotor Diameters (in):
0.31 0.81 13