AERO6 Big Brake Front Brake Kit (Race)



AERO6 Big Brake Front Brake Kit (Race)
(9) Brake Kits Available

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 15.00
Caliper Mount: Radial
Min. Wheel Diameter: 19

AERO6 Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on all base, Eco-Boost and standard production GT model 2015-2018 Mustangs, when there are no penalties or restrictions on rotor size. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 15.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Stainless steel braided flexlines are required for installation and must be purchased separately based on the model year.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14290
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-13912 *
Price $3,023.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

AERO6R/ST six piston radial mount race calipers are coupled with the high cooling capacity of 14.00" dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.
Note 1. Wheel mounting pad must not be larger than 6.00" to fit into inset area of this hat. Note 2. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 3. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
ATS / Speedtech AFX Spindle using C-5 /C-6 Brakes Cadillac XLR 2004-2010 Chevrolet Corvette 1997-2004 Chevrolet Corvette 2005-2008 Chevrolet Corvette 2006-2008 Chevrolet Corvette 2009-2013 Chevrolet Corvette 2010-2013 Chevrolet Corvette 2011 Chevrolet Corvette 2013 Factory Five Racing GTM Supercar 2010-9998
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-13743
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit Multiple Line Kits *
Price $2,883.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on all 2005-2014 model Mustangs. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 14.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Ford Mustang 2005-2013 Ford Mustang 2007-2009 Ford Mustang 2007-2014 Ford Mustang 2008 Ford Mustang 2011-2012 Ford Mustang 2012-2013 Ford Mustang 2014
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-13882
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-9111 *
Price $2,951.19
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on all base, Eco-Boost and standard production GT model 2015-2018 Mustangs, when 14.00” / 355mm rotors are required by rules, or preferred for weight savings. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 14.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Stainless steel braided flexlines are required for installation and must be purchased separately based on the model year.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Ford Mustang 2015 Ford Mustang 2015-2018 Ford Mustang 2016-2017
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14482
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-13912 *
Price $2,673.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

AERO6R six piston radial mount calipers are coupled with the high cooling capacity of 14.00" Spec37 GT series directional vane rotors to provide consistent, high response braking for spec category road course cars, intermediate level track event cars, and all levels of auto-cross. This version of the AERO6R caliper uses a forged aluminum body with a black anodized finish, and a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Stainless steel pistons provide corrosion free, long wearing service life with reduced heat transfer as compared to the aluminum and steel pistons used in many OE calipers. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are mounted to the OE hubs with weight saving forged aluminum hats. Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This system is completed with high temperature, high friction, race compound pads selected specifically by application for exceptional driver control, especially when DOT rated tires are in play, or the absence of additional down force aero-body work can marginalize traction. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
ATS / Speedtech AFX Spindle using C-5 /C-6 Brakes Cadillac XLR 2004-2010 Chevrolet Corvette 1997-2004 Chevrolet Corvette 2005-2008 Chevrolet Corvette 2006-2008 Chevrolet Corvette 2009-2013 Chevrolet Corvette 2010-2013 Chevrolet Corvette 2011 Chevrolet Corvette 2013 Factory Five Racing GTM Supercar 2010-9998
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14557
Info Details
Caliper Color Black Anodize
Rotor Slotted
Line Kit Multiple Line Kits *
Price $1,869.00
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

AERO6-ST six piston radial mount calipers are coupled with the high cooling capacity of 14.00” dynamically mounted GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. Thermlock pistons in the calipers resist fade and extend service life by reducing the heat transfer from the pads, caliper body, fluid, and seals. New design AERO6-ST (Thick Pad) calipers with 20mm thick pads increase endurance with longer pad life. Rotors mount to the hubs with forged aluminum hats and radial mount brackets secure the caliper to the spindle in the OE location without modification. Kits also include high temperature, high friction race compound pads and all premium grade fasteners.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Infiniti G35 2003 Infiniti G35 2004-2006 Infiniti G35 2007 Nissan 350Z 2003-2009
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14816
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-9196 *
Price $2,673.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

AERO6-ST six piston radial mount calipers are coupled with the high cooling capacity of 14.00” dynamically mounted GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition. Thermlock pistons in the calipers resist fade and extend service life by reducing the heat transfer from the pads, caliper body, fluid, and seals. New design AERO6-ST (Thick Pad) calipers with 20mm thick pads increase endurance with longer pad life. Rotors mount to the hubs with forged aluminum hats and radial mount brackets secure the caliper to the spindle in the OE location without modification. Kits also include high temperature, high friction race compound pads and all premium grade fasteners.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Infiniti G35 2007-2008 Infiniti G37 2008 Infiniti G37 2008-2013 Infiniti G37 2009-2013 Nissan 370Z 2009-2013
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14820
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-11590 *
Price $2,673.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on all 2001-2006 BMW E46 M3 models. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The kit is also easily configured with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT competition series 14.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high heat competition. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with minor modifications to the spindle dust shield as illustrated in photo 1 on page 4 of the assembly instructions. This championship proven system is completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are included in each kit to complete the installation.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
BMW M3 2001-2006
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-14978
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit 220-11983 *
Price $2,673.99
Purchase
Call (805) 388-1188

AERO6 Big Brake Front Brake Kit (Race)
Pistons: 6
Rotor Diameter: 14.00
Caliper Mount: Radial
Min. Wheel Diameter: 18

AERO6 Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on 2010-2015 model Camaros. The AERO6R/ST six piston calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series 14.00” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces. Mounting brackets, including all premium grade fasteners, secure the calipers to the spindles in the stock location with no modifications required. This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application. Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year.
Note 1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. Note 2. Kit may fit some 18" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Chevrolet Camaro 2010-2014 Chevrolet Camaro 2015
Ordering Information for AERO6 Big Brake Front Brake Kit (Race)
Item No 140-15231
Info Details
Caliper Color Type III Ano
Rotor Slotted
Line Kit Multiple Line Kits *
Price $2,673.99
Purchase
Call (805) 388-1188





Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2019 Wilwood Engineering, Inc. - All Rights Reserved