Forged Dynalite Front Drag Brake Kit
Wilwood Disc Brakes offers the largest selection of bolt-on brake kits with specifically engineered and matched
groups of components designed to provide superior brake system performance and custom appeal over a wide range
of applications. Most kits are easily installed with the common hand tools used to perform routine brake service.
Forged Dynalite Front Drag Brake Kit
(17)
Brake Kits Available
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
This kit fits the following vehicles:
Ford Fairlane 1970
Ford Falcon 1970
Ford Maverick 1970
Ford Maverick 1971-1974
Ford Mustang 1970
Ford Mustang 1970-1973
Ford Mustang 1971-1972
Ford Mustang 1973
Ford Ranchero 1970
Ford Ranchero 1970-1971
Ford Torino 1970-1971
Mercury Comet 1971
Mercury Comet 1971-1973
Mercury Cougar 1970-1972
Mercury Cougar 1973
Mercury Cyclone 1970-1971
Mercury Montego 1970-1971
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-11930-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-9195 *
|
| Price |
$1,146.97
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
This kit fits the following vehicles:
Ford Fairlane 1964-1965
Ford Fairlane 1966-1969
Ford Falcon 1963-1964
Ford Falcon 1965-1966
Ford Falcon 1967-1969
Ford Falcon 1970
Ford Maverick 1970
Ford Mustang 1965-1966
Ford Mustang 1967-1969
Ford Mustang 1970
Ford Ranchero 1963-1964
Ford Ranchero 1965
Ford Ranchero 1966-1969
Ford Ranchero 1967-1968
Ford Torino 1968
Ford Torino 1968-1969
Ford Torino 1969
Mercury Comet 1963-1964
Mercury Comet 1965-1966
Mercury Comet 1967-1969
Mercury Cougar 1967-1969
Mercury Cyclone 1964
Mercury Cyclone 1965-1968
Mercury Cyclone 1966-1969
Mercury Cyclone 1969
Mercury Montego 1968
Mercury Montego 1968-1969
Mercury Montego 1969
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
Forged Dynalite Front Drag Brake Kit (Hat)
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit (Hat) Description
FDL Front Drag Brake Kits with Hats are drag racing’s most popular front brake kits. FDL kits are available for the popular Import car spindles or front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged Hats with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include attachment hardware, brake pads, and instructions.
Note 1. Kit may fit some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
Note 2. This kit requires spindles from vehicles originally equipped with 262mm (10.32") diameter rotors.
This kit fits the following vehicles:
Acura EL 2001-2005
Acura Integra 1990-1996
Acura Integra 1997-2001
Honda Civic 1990-2000
Honda Civic 1992-1995
Honda Civic 1993-1995
Honda Civic 1994-1995
Honda Civic 1996
Honda Civic 1996-2000
Honda Civic 1999-2000
Honda Civic 2001-2003
Honda Civic 2002-2003
Honda Civic 2004
Honda Civic 2004-2005
Honda Civic 2005
Honda Civic del Sol 1994
Honda Civic del Sol 1995-1997
Honda Fit 2007-2013
Honda Fit 2008-2013
Honda Fit 2012
Honda Fit 2012-2013
Ordering Information for Forged Dynalite Front Drag Brake Kit (Hat)
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
Drilled
|
Multiple Line Kits *
|
$1,123.52
|
|
140-8442-D
|
Call (805) 388-1188
|
|
| Item No |
140-8442-D
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,123.52
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit includes 5 lug hubs. Not applicable to 4 lug vehicles.
Note 2. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Ford Mustang II 1974-1978
Ford Pinto 1971-1972
Ford Pinto 1971-1973
Ford Pinto 1973
Ford Pinto 1974-1980
Mercury Bobcat 1975-1980
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-1013-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,056.42
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. For late model Art Morrison Strut.
Note 2. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Art Morrison Strut
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-1015-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,084.06
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Buick Apollo 1973-1974
Buick Gran Sport 1965-1967
Buick GS 1970-1972
Buick GS 350 1968
Buick GS 350 1968-1969
Buick GS 350 1969
Buick GS 400 1968
Buick GS 400 1968-1969
Buick GS 400 1969
Buick GS 455 1970-1972
Buick Skylark 1964-1966
Buick Skylark 1964-1972
Buick Skylark 1967-1970
Buick Skylark 1967-1972
Buick Special 1964-1966
Buick Special 1964-1969
Buick Special 1967-1969
Buick Sportwagon 1964-1966
Buick Sportwagon 1964-1972
Buick Sportwagon 1967-1970
Buick Sportwagon 1967-1972
Chevrolet Camaro 1967-1969
Chevrolet Camaro 1968-1969
Chevrolet Chevelle 1964-1966
Chevrolet Chevelle 1964-1972
Chevrolet Chevelle 1967-1972
Chevrolet Chevy II 1962-1967
Chevrolet Chevy II 1964-1966
Chevrolet Chevy II 1967-1968
Chevrolet Corvette 1963-1964
Chevrolet Corvette 1965-1982
Chevrolet El Camino 1964-1966
Chevrolet El Camino 1964-1972
Chevrolet El Camino 1967-1972
Chevrolet Malibu 1964-1966
Chevrolet Malibu 1967
Chevrolet Monte Carlo 1970-1972
Chevrolet Nova 1967-1974
Chevrolet Nova 1969-1974
Ford F-100 1965-1979
Ford Falcon 1960-1965
Ford Mustang 1964-1966
GMC Sprint 1971-1972
Heidts Pro-G
Mercury Comet 1960-1965
Oldsmobile 442 1964-1966
Oldsmobile 442 1964-1971
Oldsmobile 442 1967-1972
Oldsmobile 442 1970-1971
Oldsmobile Cutlass 1964-1966
Oldsmobile Cutlass 1964-1972
Oldsmobile Cutlass 1967-1972
Oldsmobile Cutlass 1970-1972
Oldsmobile Cutlass Supreme 1967-1972
Oldsmobile Cutlass Supreme 1970-1972
Oldsmobile F85 1964-1966
Oldsmobile F85 1964-1972
Oldsmobile F85 1967-1969
Oldsmobile F85 1967-1972
Oldsmobile F85 1970-1972
Oldsmobile Omega 1973-1974
Oldsmobile Vista Cruiser 1964-1966
Oldsmobile Vista Cruiser 1964-1972
Oldsmobile Vista Cruiser 1967-1972
Pontiac Acadian 1964-1966
Pontiac Acadian 1967-1971
Pontiac Beaumont 1964-1966
Pontiac Beaumont 1964-1969
Pontiac Beaumont 1967-1969
Pontiac Firebird 1967-1969
Pontiac Grand Prix 1969
Pontiac Grand Prix 1969-1972
Pontiac GTO 1964-1966
Pontiac GTO 1964-1972
Pontiac GTO 1967-1971
Pontiac GTO 1967-1974
Pontiac GTO 1974
Pontiac LeMans 1964-1966
Pontiac LeMans 1964-1972
Pontiac LeMans 1967-1972
Pontiac Tempest 1964-1966
Pontiac Tempest 1964-1970
Pontiac Tempest 1967-1970
Pontiac Ventura 1971-1974
Ridetech 1960-1965 Falcon w/Pin Spindle
Ridetech 1962-1967 Chevy II / Nova w/Pin Spindle
Ridetech 1963-1982 C2/C3 Corvette w/Pin Spindle
Ridetech 1964-1966 Mustang w/Pin Spindle
Ridetech 1964-1972 GM A Body w/Pin Spindle
Ridetech 1965-1979 F100 w/Pin Spindle
Ridetech 1967-1969 GM F Body w/Pin Spindle
Ridetech 1968-1974 GM X Body w/Pin Spindle
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-1017-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-7056 *
|
| Price |
$1,056.42
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Front kits fit 11" rotor spindles only.
Note 2. Requires modifications to original spindle
Note 3. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Buick Apollo 1975
Buick Century 1973-1977
Buick Estate Wagon 1977-1978
Buick LeSabre 1977-1978
Buick Regal 1973-1977
Buick Skylark 1975-1978
Cadillac Seville 1976
Chevrolet Camaro 1970-1978
Chevrolet Chevelle 1973-1977
Chevrolet Chevelle Concours 1977-1978
Chevrolet El Camino 1973-1977
Chevrolet Impala 1977-1978
Chevrolet Malibu 1973-1977
Chevrolet Monte Carlo 1973-1977
Chevrolet Nova 1975-1978
GMC Sprint 1973-1977
Oldsmobile 442 1973
Oldsmobile Custom Cruiser 1977-1978
Oldsmobile Cutlass 1973-1977
Oldsmobile Cutlass Supreme 1973-1977
Oldsmobile Cutlass Supreme 1974-1976
Oldsmobile Delta 88 1977-1978
Oldsmobile Omega 1975-1978
Oldsmobile Vista Cruiser 1973-1976
Pontiac Bonneville 1977-1978
Pontiac Catalina 1977-1978
Pontiac Firebird 1970-1978
Pontiac Grand Am 1973-1975
Pontiac Grand Prix 1973-1977
Pontiac GTO 1973
Pontiac LeMans 1973-1977
Pontiac Phoenix 1977-1978
Pontiac Ventura 1975-1977
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Requires modifications to original spindle
Note 2. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Buick Century 1979-1981
Buick Grand National 1982-1987
Buick Regal 1979-1987
Buick Regal 1984-1987
Chevrolet El Camino 1979-1987
Chevrolet Malibu 1979-1983
Chevrolet Monte Carlo 1979-1988
Chevrolet S10 Blazer 1983-1997
Chevrolet S10 Pickup 1982
Chevrolet S10 Pickup 1983-1996
Chevrolet S10 Pickup 1997-2003
Chevrolet S10 Pickup 2003
GMC Caballero 1978-1980
GMC Caballero 1978-1987
GMC Caballero 1981
GMC Caballero 1981-1986
GMC Jimmy 1992-1997
GMC S15 1982
GMC S15 1983-1990
GMC S15 Jimmy 1983-1991
GMC Sonoma 1991-1996
GMC Sonoma 1997-2002
GMC Sonoma 2003
Isuzu Hombre 1996-2000
Oldsmobile Cutlass 1979
Oldsmobile Cutlass 1980
Oldsmobile Cutlass 1981
Oldsmobile Cutlass Calais 1979-1984
Oldsmobile Cutlass Calais 1983-1984
Oldsmobile Cutlass Cruiser 1980-1983
Oldsmobile Cutlass Salon 1979
Oldsmobile Cutlass Salon 1979-1980
Oldsmobile Cutlass Salon 1979-1986
Oldsmobile Cutlass Salon 1979-1987
Oldsmobile Cutlass Supreme 1979-1981
Oldsmobile Cutlass Supreme 1979-1987
Oldsmobile Cutlass Supreme 1981
Oldsmobile Cutlass Supreme 1987
Oldsmobile Cutlass Supreme 1988
Pontiac Bonneville 1982-1987
Pontiac Grand Am 1979-1980
Pontiac Grand LeMans 1982-1983
Pontiac Grand Prix 1979-1987
Pontiac LeMans 1979-1980
Pontiac LeMans 1981-1983
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-1033-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-7056 *
|
| Price |
$1,084.06
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Front Brake kits fit OE Single piston caliper spindles only.
Note 2. Requires modifications to original spindle
Note 3. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Chevrolet Camaro 1982-1987
Chevrolet Camaro 1988-1992
Pontiac Firebird 1982-1987
Pontiac Firebird 1988-1992
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
Details
|
Type III Anodize
|
Drilled
|
Multiple Line Kits *
|
$1,056.42
|
|
140-1035-BD
|
Call (805) 388-1188
|
|
| Item No |
140-1035-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
Multiple Line Kits *
|
| Price |
$1,056.42
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Ford 1 Ton Pickup 1937-1947
Ford 1/2 Ton Pickup 1937-1947
Ford 3/4 Ton Pickup 1937-1947
Ford Deluxe 1939
Ford Deluxe 1940-1948
Ford Model 1 GA Truck 1941
Ford Model 11 A 1941
Ford Model 2 GA Special 1942
Ford Model 21 A Deluxe 1942
Ford Model 74 1937
Ford Model 78 1937
Ford Model 81 A 1938
Ford Model 82 A 1938
Ford Model 85 1938
Ford Pickup 1940
Ford Sedan Delivery 1937-1947
Ford Standard 1939-1940
Ford Super Deluxe 1941-1948
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
|
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Dodge 330 1963-1964
Dodge 440 1963-1964
Dodge B-Body 1962-1964
Dodge B-Body 1965-1969
Dodge B-Body 1970-1972
Dodge Challenger 1970-1972
Dodge Charger 1966-1969
Dodge Charger 1970-1972
Dodge Coronet 1965-1969
Dodge Coronet 1970-1972
Dodge Coronet Super Bee 1968-1969
Dodge Coronet Super Bee 1970
Dodge E-Body 1970-1972
Dodge Polara 1962-1964
Plymouth Barracuda 1970-1972
Plymouth B-Body 1962-1964
Plymouth B-Body 1965-1969
Plymouth B-Body 1970-1972
Plymouth Belvedere 1962-1964
Plymouth Belvedere 1965-1969
Plymouth Belvedere 1970
Plymouth Cuda 1970-1972
Plymouth E-Body 1970-1972
Plymouth Fury 1962-1964
Plymouth GTX 1967-1969
Plymouth GTX 1970-1971
Plymouth Roadrunner 1968-1969
Plymouth Roadrunner 1970-1972
Plymouth Satellite 1965-1969
Plymouth Satellite 1970-1972
Plymouth Savoy 1962-1964
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-2711-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,085.53
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Dodge A-Body 1961-1972
Dodge Dart 1963-1972
Dodge Lancer 1961-1962
Plymouth A-Body 1960-1972
Plymouth Barracuda 1964-1969
Plymouth Duster 1970-1972
Plymouth Scamp 1971-1972
Plymouth Valiant 1960-1972
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-2712-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,110.76
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Dodge A-Body 1965-1972
Dodge Dart 1965-1972
Plymouth A-Body 1965-1972
Plymouth Barracuda 1965-1969
Plymouth Duster 1970-1972
Plymouth Scamp 1971-1972
Plymouth Valiant 1965-1972
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-2713-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,085.53
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Chrysler Cordoba 1975-1983
Chrysler Fifth Avenue 1983-1989
Chrysler Imperial 1981-1983
Chrysler Lebaron 1977-1981
Chrysler New Yorker 1979-1982
Chrysler Newport 1979-1981
Dodge A-Body 1973-1976
Dodge Aspen 1976-1980
Dodge B-Body 1973-1979
Dodge Challenger 1973-1974
Dodge Charger 1973-1978
Dodge Charger 1975
Dodge Coronet 1973-1976
Dodge Dart 1973-1976
Dodge Diplomat 1977-1989
Dodge E-Body 1973-1974
Dodge F-Body 1976-1980
Dodge J-Body 1980-1983
Dodge Magnum 1978-1979
Dodge Mirada 1980-1983
Dodge Monaco 1977
Dodge Monaco 1978
Dodge R/T 1976-1978
Dodge St. Regis 1979-1981
Plymouth A-Body 1973-1976
Plymouth Barracuda 1973-1974
Plymouth B-Body 1973-1979
Plymouth Caravelle 1982-1984
Plymouth Caravelle 1985
Plymouth Cuda 1973-1974
Plymouth Duster 1973-1976
Plymouth E-Body 1973-1974
Plymouth F-Body 1976-1980
Plymouth Fury 1975-1977
Plymouth Fury 1978
Plymouth GTX 1973-1975
Plymouth J-Body 1980-1983
Plymouth Roadrunner 1973-1980
Plymouth Satellite 1973-1974
Plymouth Scamp 1973-1976
Plymouth Valiant 1973-1976
Plymouth Volare 1976-1980
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-2719-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-8307 *
|
| Price |
$1,037.82
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Requires modifications to original spindle
Note 2. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Ford Mustang 1984-1986
Ford Mustang 1987-1993
Ford Mustang 1993
Ford Thunderbird 1987-1988
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|
| Item No |
140-4503-BD
|
| Info |
Details
|
| Caliper Color |
Type III Anodize
|
| Rotor |
Drilled
|
| Line Kit |
220-6471 *
|
| Price |
$1,056.42
|
| Purchase |
Call (805) 388-1188
|
Forged Dynalite Front Drag Brake Kit
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Pistons: 4
Rotor Diameter: 10.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Forged Dynalite Front Drag Brake Kit Description
FDL Front Drag kits are drag racing’s most popular front brake kits. FDL kits are available for the popular muscle car spindles and select aftermarket front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.
Note 1. Front kits fit 11" rotor spindles only.
Note 2. Requires modifications to original spindle
Note 3. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
This kit fits the following vehicles:
Buick Estate Wagon 1979-1985
Buick LeSabre 1979-1985
Buick Skylark 1979
Chevrolet Camaro 1979-1981
Chevrolet Caprice 1979-1990
Chevrolet Impala 1979-1985
Chevrolet Nova 1979
Oldsmobile Custom Cruiser 1979-1985
Oldsmobile Delta 88 1979-1985
Oldsmobile Omega 1979
Pontiac Bonneville 1979-1981
Pontiac Catalina 1979-1981
Pontiac Firebird 1979-1981
Pontiac Parisienne 1980-1986
Pontiac Phoenix 1979
Ordering Information for Forged Dynalite Front Drag Brake Kit
|
Info
|
Caliper Color
|
Rotor
|
Line Kit
|
Price
|
|
Item No
|
Purchase
|
|
|
|