Brake Kits Found: 6
Number of Pistons
4
6
Rotor Diameter
Caliper Mount

*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.

Forged Dynapro 6 Big Brake Front Brake Kit (Hat)
Item No: 140-10735
Pistons: 6
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $1,079.66


Forged Dynapro 6 Big Brake Front Brake Kit (Hat) Description

The enhanced brake capacity and pad performance of the DynaPro 6 forged billet six-piston caliper is combined with 12.19” diameter rotors for this group of front wheel drive sport compact kits. These kits are the perfect compliment to wheel, tire, and suspension upgrades on daily drivers, competition vehicles, and custom styled show machines. Each kit is engineered vehicle specific to maintain full compatibility with the OE master cylinder output and factory ABS functions. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

Forged Dynalite Big Brake Front Brake Kit (Hat)
Item No: 140-6163
Pistons: 4
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $922.16


Forged Dynalite Big Brake Front Brake Kit (Hat) Description

Forged Dynalite ProSeries kits provide high performance, big brake stopping power by combining modern brake technology with high-tech styling to update the brakes on your front-wheel-drive sport compact vehicle. The OE calipers and rotors are replaced with forged aluminum, four-piston calipers mounted over larger diameter, certified alloy 30-vane vented iron rotors. The new two-piece rotor assemblies provide weight-saving forged aluminum mounting hats. The calipers feature an increase in effective piston volume to deliver higher clamping power with less pedal effort than stock. The thicker, vented rotor design adds cooling efficiency and durability to extend service life. BP-series SmartPads add high-response with increased resistance to fade and longer wear over typical OE replacement pads. Options for caliper colors and rotor styles are available to personalize the look on any car. For on-track driving enthusiasts, additional track-only fortifications are available on a custom order basis by contacting the technical staff at the factory.

Forged Dynalite Front Drag Brake Kit (Hat)
Item No: 140-8442
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $1,021.38


Forged Dynalite Front Drag Brake Kit (Hat) Description

FDL Front Drag Brake Kits with Hats are drag racing’s most popular front brake kits. FDL kits are available for the popular Import car spindles or front struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Forged billet FDL four piston calipers mount directly to the spindle with a bolt-on bracket. Forged Hats with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include attachment hardware, brake pads, and instructions.

Dynapro Radial Big Brake Front Brake Kit (Race)
Item No: 140-14940
Pistons: 4
Rotor Diameter: 11.75
Caliper Mount: Radial
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $1,882.23


Dynapro Radial Big Brake Front Brake Kit (Race) Description

This kit is configured for dedicated road racing on all 1990-2001 Acura Integra 4 lug models, and the various model Honda Civics, CRX’s, Del Sols, and Fits, and that are equipped stock, or have been upgraded to use the large bearing hubs and OE spindles that originally used the 262mm / 10.32” diameter rotors. It requires 15” wheels designed with additional inside clearance to accommodate the larger than stock brake package. The four piston DPR/ST radial mount calipers used in this kit feature a forged aluminum body with a Type III Mil-Spec hard anodized, medium gray color finish. Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout. Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and to extend service life by decreasing temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish. Caliper piston volumes are sized for compatibility with OE power brake boosters equipped with the larger 15/16” to 1.00” bore master cylinders, and are easily configured with manual brake conversions and balance bar pedals using appropriately sized master cylinders. Spec37 alloy, GT competition series 11.75” diameter directional vane rotors are dynamically mounted to the OE hubs with weight saving forged aluminum hats. Unsprung and rotating weight are minimized while providing high cooling efficiency and rugged durability with thermal stability in sustained high heat competition. Mounting brackets, including all premium grade fasteners, secure the calipers in the stock location without modifications. This race winning system is completed with high temperature, high friction, endurance compound race pads selected specifically by application. Stainless steel braided flexlines are required for installation, and must be ordered separately by the specific vehicle year, make, and model.

Forged DPHA Front Caliper and Rotor Kit
Item No: 140-12996
Pistons: 4
Rotor Diameter: 10.32
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $657.28


Forged DPHA Front Caliper and Rotor Kit Description

Wilwood’s new DynaPro Honda/Acura Caliper (DPHA) for Honda and Acura models originally equipped with 262mm diameter rotors. These calipers bolt directly to the stock mounts on factory spindles, fit over the OE 262mm diameter rotor, accept the OE brake hose, and clear many factory aluminum wheels including the EM1 Si 15” wheel. Designed around Wilwood’s proven DynaPro series four piston calipers, the forged billet bodied DPHA caliper delivers high-strength clamping force and positive stopping power. Four stainless steel pistons provide fully balanced pad loading, along with the corrosion resistance and thermal retardant qualities of the stainless alloy that will keep your calipers cooler and running trouble free for many more miles. Calipers work perfectly with the OE master cylinder and ABS functions, and are available with either black or red high-gloss, high-temp, brake fluid resistant sealed powder coat and feature Wilwood’s signature logo.

Forged DPHA Front Caliper Kit
Item No: 140-13029
Pistons: 4
Rotor Diameter: 
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: 
Axle Offset: 
From: $514.48


Forged DPHA Front Caliper Kit Description

Wilwood’s new DynaPro Honda/Acura Caliper (DPHA) for Honda and Acura models originally equipped with 262mm diameter rotors. These calipers bolt directly to the stock mounts on factory spindles, fit over the OE 262mm diameter rotor, accept the OE brake hose, and clear many factory aluminum wheels including the EM1 Si 15” wheel. Designed around Wilwood’s proven DynaPro series four piston calipers, the forged billet bodied DPHA caliper delivers high-strength clamping force and positive stopping power. Four stainless steel pistons provide fully balanced pad loading, along with the corrosion resistance and thermal retardant qualities of the stainless alloy that will keep your calipers cooler and running trouble free for many more miles. Calipers work perfectly with the OE master cylinder and ABS functions, and are available with either black or red high-gloss, high-temp, brake fluid resistant sealed powder coat and feature Wilwood’s signature logo.



*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.



 

All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2024 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.04 May 22, 2023
​ ​