Name: Dynapro Lug Mount Front Dynamic Drag Brake Kit
Brand: Wilwood
Availability: InStock

Front Brake Kit — 140-14417-DN

Kit Contents
Wilwood Dynapro Lug Mount Front Dynamic Drag Brake Kit Parts Laid Out - Nickel Plate Caliper - Drilled Rotor Click Image to Close
View Custom Caliper Colors

Kit Summary
OE Hub Offset:	-.12
(Increase / Decrease Track Width)
Spindle Type:	Drop Spindle Factory Disc Spindle Factory Drum Spindle
Mount Type:	Lug
Caliper Type:	4 - Nickel Plate
Rotor Diameter:	10.75
Min Wheel Diameter Req'd*:	15
*This Brake Kit may fit 15-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

UPC Number
UPC	889545079746

	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
	Applicable to Brake Pads Only

Dynapro Lug Mount Front Dynamic Drag Brake Kit

Wilwood’s newest Dynapro Front Dynamic Drag kits will soon be drag racing’s most popular front brake kits. DPL kits are available for the popular muscle car spindles and struts used on four-wheel disc cars weighing up to 2,800 pounds, or rear drum brake equipped cars weighing up to 2,400 pounds. Dynamic rotor mounting adapters with t-nuts promote less distortion due to temperature and extends rotor life. Forged billet DPL four piston calipers mount directly to the spindle with an aluminum bolt-on brackets. Forged billet, five lug hubs with direct mount steel rotors combine to provide an average weight savings of over 30 pounds compared to stock drum or disc brakes. Kits include all new hardware, wheel bearings, seals and extra length lug studs.

Fitment & Installation Details

Dynapro Lug Mount Front Dynamic Drag Brake Kit Assembly Schematic

Dynapro Lug Mount Front Dynamic Drag Brake Kit Assembly Schematic Zoom Image

*NOTE: Some applications for this kit have the steering arm to the rear of the spindle and others to the front. Also, some applications have room to mount the bracket and caliper on the steering arm side of the spindle while the steering arm may interfere in other applications. The brackets in this kit may be mounted on either the front or rear side of the spindle. If mounting to the front of the spindle, the right hand bracket will be used on the left hand side of the vehicle and vice versa. This drawing shows a typical 1967-1969 Camaro left side application where the steering arm is to the rear and there is room to mount the caliper on the steering arm side as shown. Determine which way the bracket and caliper will fit best on your application.

Compatible Vehicles for this Brake Kit

BRAKE KIT: Dynapro Lug Mount Front Dynamic Drag Brake Kit

SPINDLE TYPE:

Drop Spindle;

Factory Disc Spindle;

Factory Drum Spindle ;

This Brake Kit is Compatible with the Following Vehicle Makes: Buick Chevrolet Ford GMC Heidts Mercury Oldsmobile Pontiac Ridetech

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles

Caution
	THIS BRAKE KIT HAS A HUB OFFSET OF: -.12 This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance	Assembly Instructions
Wheel Clearance Diagram Click Image to Close	Assembly Instructions

Notes
1. Kit may fit some 14" wheels. Check wheel clearance diagram in kit installation instructions before purchase.

Kit Components & Specifications

Calipers
Left Hand - Part No:	120-14153-N
Right Hand - Part No:	120-14153-N
Type:	Dynapro Lug Mount
Finish Color:	Nickel Plate
Piston Count:	4
Piston 1 Bore (in):	1.75
Piston 2 Bore (in):	1.75
Piston Area (In²):	4.80
Piston Type:	Stainless
Mount Type:	Lug
Brake Pad Plate:	7812
Brake Pad Area (In²):	6.36
Brake Pad Volume (In³):	2.1
Pad Compound:	BP-20
Dynapro Lug Mount Caliper - Nickel Plate Click Image to Close

Rotors
Left Hand - Part No:	160-3306
Right Hand - Part No:	160-3306
Type:	Drilled Steel Rotor
Style:	Drilled
Surface Finish:	Black Oxide
Material:	Steel
Outside Diameter (in):	10.75
Width (in):	0.35
Vane Count:	Solid
Design Type:	Solid
Bedded:	No
Dynamically Balanced:	No
Drilled Steel Rotor - Steel - Black Oxide Click Image to Close

Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Hubs
Hub - Part No:	270-7275
Type:	Hub - Solid Rotor Offset
Material:	Aluminum
Finish Color:	Bare
Mount Style:	Direct / Adapter
Bolt Circle 1:	5 x 4.50
Bolt Circle 2:	5 x 4.75
Bolt Circle 3:
Stud Diameter - BC 1:	1/2-20
Stud Diameter - BC 2:	1/2-20
Stud Diameter - BC 3:
Hub - Solid Rotor Offset - Aluminum - Bare Click Image to Close

Parts & Accessories

Caliper Parts
O-ring Kit:	130-2655
Replacement Dustboot:	N-A
Replacement Piston 1:	200-7528
Replacement Piston 2:	200-7528
Replacement Piston 3:	N-A
Replacement Piston 4:	N-A
CrossOver O-Ring Kit:	130-10540
Crossover Tube:	N-A
Self-Bleeder Tube:	N-A
Bridge Bolt Kit:	230-10117
Wear Plate - Left Hand:	300-5875
Wear Plate - Right Hand:	300-5875
Pad Retainer:	300-9634
Bleed Screw Kit:	220-0627

*Brake Lines Needed
Front Line Kit:	220-7056

Hat
Bolt Kit:

Hub
Bolt Kit:

You May Also Be Interested In: