Front Brake Kit – Part No: 140-14074-N
Call (805) 388-1188
Forged Superlite 4R Big Brake Front Brake Kit (Race)
Prod #: 140-14074-N
Price: $2,195.19

*NOTE: Brake Line Kit 220-6746 is included in this Brake Kit.
Front Brake Kit — 140-14074-N

Kit Summary
Spindle Type: Factory Disc Spindle
Mount Type: Radial
Caliper Type: 4 - Nickel Plate
Rotor Diameter: 13.06
Min Wheel Diameter Req'd*: 17
*This Brake Kit may fit 17-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
UPC Number
UPC 889545072938

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only


Forged Superlite 4R Big Brake Front Brake Kit (Race)

This dedicated competition kit is specially configured for open class road racing on 1998-2002 Camaros and Firebirds, or 1993-97 cars that have been upgraded with 1998-02 spindles. Four piston, forged aluminum, Superlite 4R/ST radial mount Quick-Silver nickel finish calipers with Thermlock pistons, PolyMatrix H compound race pads, and two-piece 13.06” diameter Spec 37 alloy GT48 directional vane rotors, deliver consistent stopping power and extreme duty durability under sustained high heat with this ready to bolt-on kit. The calipers are volume matched for compatibility with original equipment power brake system output, and easily matched to common master cylinder sizes available for manual balance bar pedals. Kits include braided stainless steel flex lines, radial mount caliper brackets, and all the necessary hardware to complete the installation.


Fitment & Installation Details


Forged Superlite 4R Big Brake Front Brake Kit (Race) Assembly Schematic


Compatible Vehicles for this Brake Kit
BRAKE KIT:   Forged Superlite 4R Big Brake Front Brake Kit (Race)
SPINDLE TYPE:  
Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes: Chevrolet Pontiac

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS AN HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance Assembly Instructions




Assembly Instructions
Notes
1. Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
2. Kit may fit some 17" wheels. Check wheel clearance diagram in kit installation instructions before purchase.



Kit Components & Specifications
Calipers
Left Hand - Part No: 120-13266-N
Right Hand - Part No: 120-13265-N
Type: Forged Superlite 4R
Finish Color: Nickel Plate
Piston Count: 4
Piston Area (In²): 4.84
Piston Type: Thermlock
Mount Type: Radial
Brake Pad Plate: 7420
Brake Pad Area (In²): 8.2
Brake Pad Volume (In³): 4.9
Pad Compound: BP-30
Rotors
Left Hand - Part No: 160-8166
Right Hand - Part No: 160-8165
Type: GT 48 Curved Vane
Style: GT Slotted
Surface Finish: Plain
Material: Spec-37 Iron
Outside Diameter (in): 13.06
Width (in): 1.25
Vane Count: 48 CV
Design Type: GT
Bedded: No
Dynamically Balanced: Yes
Rotor Hats
Hat - Part No: 170-6837
Type: Big Brake Hat - Short Offset
Material: Aluminum
Finish Color: Black E-Coat
Hat Offset Dimension (in): 0.88
Bolt Circle 1: 5 x 4.50
Bolt Circle 2: 5 x 4.75
Bolt Circle 3:
Stud Diameter - BC 1: 0.56
Stud Diameter - BC 2: 0.52
Stud Diameter - BC 3: 0
Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Caliper Parts
O-ring Kit: 130-5100
Replacement Dustboot: N-A
Replacement Piston 1: 200-7550
Replacement Piston 2: 200-7553
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: 130-10540
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: 230-5978
Wear Plate - Left Hand: 300-5923
Wear Plate - Right Hand: 300-5922
Pad Retainer: N-A
Bleed Screw Kit: 220-0627
Brake Lines
Front Line Kit:
220-6746
Hat
Bolt Kit: 230-4572
Hub
Bolt Kit:




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved