Front Brake Kit – Part No: 140-3326-D
Call (805) 388-1188
Dynalite Single Floater Front Drag Brake Kit
Prod #: 140-3326-D
Price: $748.99

*Line Kit Needed


220-7056
$66.61
Front Brake Kit — 140-3326-D

Wilwood Dynalite Single Floater Front Drag Brake Kit - Type III Ano Caliper - Drilled Rotor Wilwood Dynalite Single Floater Front Drag Brake Kit - Type III Ano Caliper - Drilled Rotor Zoom Image

Kit Contents
Wilwood Dynalite Single Floater Front Drag Brake Kit Parts Laid Out - Type III Ano Caliper - Drilled Rotor Wilwood Dynalite Single Floater Front Drag Brake Kit Parts Laid Out - Type III Ano Caliper - Drilled Rotor Zoom Image



Kit Summary
Spindle Type: Factory Disc Spindle
Mount Type: Floating
Caliper Type: 1 - Black Anodize
Rotor Diameter: 10.00
Min Wheel Diameter Req'd*:
*This Brake Kit may fit -inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram
UPC Number
UPC 889545022391

WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only


Dynalite Single Floater Front Drag Brake Kit

The Dynalite Single Floater front drag kit is purpose built for use on lightweight cars using spindle mount brakes on P&S / Anglia style spindles. The DLSF calipers and lightweight steel rotors combine to provide excellent static holding power for use as a staging brake or as a supplementary brake on vehicles using parachutes and rear brakes to provide the majority of the stopping power. Aluminum hats are provided to mount the rotors directly to the spindle mount wheels. A choice of solid or lightweight drilled rotors is offered to provide the lowest possible weight to the front axle. Mount brackets are included.


Fitment & Installation Details


Dynalite Single Floater Front Drag Brake Kit Assembly Schematic

Dynalite Single Floater Front Drag Brake Kit Assembly Schematic Dynalite Single Floater Front Drag Brake Kit Assembly Schematic Zoom Image


Compatible Vehicles for this Brake Kit
BRAKE KIT:   Dynalite Single Floater Front Drag Brake Kit
SPINDLE TYPE:  
Factory Disc Spindle;
This Brake Kit is Compatible with the Following Vehicle Makes: Anglia Mark Williams P & S

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles
lookup vehicles
Caution
Caution THIS BRAKE KIT HAS A HUB OFFSET OF:
This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance Assembly Instructions

Wheel Clearance Diagram Wheel Clearance Diagram Zoom Image



Assembly Instructions
Notes
1. Requires welding to affix bracket assembly to spindle.
2. Kit requires spindle mount wheels with 5 x 4.75" BC to attach hat & rotor.



Kit Components & Specifications
Calipers
Left Hand - Part No: 120-2498
Right Hand - Part No: 120-2498
Type: Dynalite Single Floater
Finish Color: Type III Ano
Piston Count: 1
Piston 1 Bore (in): 1.75
Piston Area (In²): 2.40
Piston Type: Stainless
Mount Type: Floating
Brake Pad Plate: 6812
Brake Pad Area (In²): 3
Brake Pad Volume (In³): 1.1
Pad Compound: BP-10
Dynalite Single Floater Caliper - Type III Ano Dynalite Single Floater Caliper - Type III Ano Zoom Image
Rotors
Left Hand - Part No: 160-1602
Right Hand - Part No: 160-1602
Type: Drilled Steel Rotor
Style: Drilled
Surface Finish: Black Electro Coat
Material: Steel
Outside Diameter (in): 10.00
Width (in): 0.25
Vane Count: Solid
Design Type: Solid
Bedded: No
Dynamically Balanced: No
Drilled Steel Rotor - Steel - Black Electro Coat Drilled Steel Rotor - Steel - Black Electro Coat Zoom Image
Rotor Hats
Hat - Part No: 170-0995
Type: Drag Hat - Spindle Mount
Material: Aluminum
Finish Color: Black E-Coat
Hat Offset Dimension (in): 1.000
Bolt Circle 1: 5 x 4.75
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1: 0.390
Stud Diameter - BC 2: 0.000
Stud Diameter - BC 3: 0.000
Drag Hat - Spindle Mount - Aluminum - Black E-Coat Drag Hat - Spindle Mount - Aluminum - Black E-Coat Zoom Image
Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories
Caliper Parts
O-ring Kit: 130-2655
Replacement Dustboot: N-A
Replacement Piston 1: 200-7532
Replacement Piston 2: N-A
Replacement Piston 3: N-A
Replacement Piston 4: N-A
CrossOver O-Ring Kit: N-A
Crossover Tube: N-A
Self-Bleeder Tube: N-A
Bridge Bolt Kit: N-A
Wear Plate - Left Hand: N-A
Wear Plate - Right Hand: N-A
Pad Retainer: 180-0054
Bleed Screw Kit: 220-0627
*Brake Lines Needed
Front Line Kit:
220-7056
Hat
Bolt Kit: 230-3829
Hub
Bolt Kit:

Additional related products:




More Details
More Details
More Details
More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2020 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 1.4.6a November 2020