Brake Pad Part No: 150-14780K


High-Temperature Racing Pads

Pad#: 6712
Compound: BP-30
Prod #: 150-14780K
Price: $214.08
Wilwood Brake Pad Plate #6712 Wilwood Brake Pad Plate #6712 Zoom Image
BP-30
BP-30 Brake Pads and Box
Picture shown is for illustrative purposes only
Pad Dimensions
Thickness(in) .49
Area(in²) 7.3
Volume(in³) 2.4
Bedded N
UPC Number
UPC 889545083255
Dust & Noise Ratings
Dust Production Rating N-A
Pad Noise Rating N-A
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

BP-30 Compound

Pad Characteristics

  • High friction pad with medium initial response, rises with increased temperature
  • Medium low temperature response
  • Low wear rate during sustained high heat braking
  • Predictable and linear response with excellent modulation
  • Very high heat fade resistance

Pad Applications

  • Racing only - Not for street use
  • Road course
  • Heavy duty pavement oval
  • Drag racing stainless
  • Sprint cars SAS
  • Titanium and Stainless
  • Club sport racers
  • Track cars with ABS

Rotor Material

  • Steel
  • Stainless Steel
  • Iron
  • Super Alloy
  • Titanium
BP-30 Performance Stats BP-30 Performance Stats Zoom Image
BP-30 Friction Coefficient and Temperature Values BP-30 Friction Coefficient and Temperature Values Zoom Image

The above friction data (μ) was recorded through braking cycles from 95 mph to 40 mph at a 0.5g deceleration. Snubs were consecutively done until rotor temperature reached 1300°F. This graph represents average data and is for general trend visualisations only comparing Wilwood pads. Chart data should not be used in comparison with other manufacturer's data. Test conditions, variables, and environment can affect test results.

Temperature range and overall friction value are the primary considerations for pad selection. The pads must maintain the proper amount of friction for stopping power within the temperatures that will be realized on the track. Overall wear rate must also be considered. For most asphalt and road race applications, compounds in the high-temperature range over 1000°F are usually necessary. Dirt track, drag race, and street performance applications usually operate at temperatures between 500° and 1000°F. Keep in mind that these are general ranges and not absolute values. Many factors and unforeseen influences can affect brake temperatures. The best indicator for pad selection will always be on-track performance. If pad fade (friction loss) due to overheating occurs, improved cooling, a heavier rotor, or a higher temperature range pad may become necessary.

Wilwood Compatible Caliper(s) for Pad #6712

Dynapro Six Lug Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 3.08 5.06
Pad Area Range (in²) 7.3
Pad Volume Range (in³) 2.4
Max Rotor Widths (in) 1.13
Max Rotor Diameters (in) 13.06

Dynapro Six Lug Mount Calipers

The DP6 marks a noteworthy step in the evolution of the DynaPro caliper series. DP6 calipers offer the performance advantages of a larger pad and a six piston differential bore configuration, with complete bolt-on interchange ability to the four piston 5.25" lug mount DynaPro models, and the long standing Dynalite caliper series. View Dynapro 6 Piston Lug Mount Calipers
Forged Dynapro 6A Lug Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 3.08 5.06
Pad Area Range (in²) 7.3
Pad Volume Range (in³) 2.4
Max Rotor Widths (in) 1.13
Max Rotor Diameters (in) 13.00

Forged Dynapro 6A Lug Mount Calipers

Wilwood's newest DynaPro DP6A Calipers combine pure-bred racing technology with contemporary design to deliver superior braking and high-tech style on a wide range of custom, show, and competition vehicles. This newest model in the DynaPro series features a reinforced triple bridge construction, with five high strength steel bridge bolts, making it the strongest and stiffest DP6 caliper ever built. Offers direct interchange with all 5.25” pattern lug mount DynaPro and Dynalite calipers. With Forged aluminum, six piston differential bore body and stainless steel pistons with high temperature seals. DP6A calipers accommodate rotors up to 13”inch diameter and widths from .38” to 1.10”. DP6A calipers are available in gloss black or red powder coat, Type III Ano, or Wilwood's Quick-Silver nickel plating. View Forged Dynapro 6A Lug Mount Calipers
Forged Dynapro 6A Lug Mount
Caliper Dimensions
Piston Count 6
Piston Area Range (in²) 5.06
Pad Area Range (in²) 7.3
Pad Volume Range (in³) 2.4
Max Rotor Widths (in) 0.83
Max Rotor Diameters (in) 13.00

Forged Dynapro 6A Lug Mount Calipers

Wilwood's newest DynaPro DP6A Calipers combine pure-bred racing technology with contemporary design to deliver superior braking and high-tech style on a wide range of custom, show, and competition vehicles. This newest model in the DynaPro series features a reinforced triple bridge construction, with five high strength steel bridge bolts, making it the strongest and stiffest DP6 caliper ever built. Offers direct interchange with all 5.25” pattern lug mount DynaPro and Dynalite calipers. With Forged aluminum, six piston differential bore body and stainless steel pistons with high temperature seals. DP6A calipers accommodate rotors up to 13”inch diameter and widths from .38” to 1.10”. DP6A calipers are available in gloss black or red powder coat, Type III Ano, or Wilwood's Quick-Silver nickel plating. View Forged Dynapro 6A Lug Mount Calipers

 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 2.99 January 4 2022