Forged Superlite 6R Radial Mount Caliper – Part No: 120-13267-N
Call (805) 388-1188
Forged Superlite 6 Radial Mount
Prod #: 120-13267-N
Price: $563.34
Available Caliper #120-13267 Configurations
Forged Superlite 6 Radial Mount - Product Summary

Pistons
Piston Count 6
Piston Area (in²) 4.04
Piston Type Thermlock
Dust Boot No
Rotor Dimensions
Rotor Width(in) 1.25
Rotor Diameter(in) 14
Pad Dimensions
Pad Area (in²) 8.2
Pad Volume (in³) 4.9
Duty Rating & Material
Material Aluminum
Weight(Lbs)
Colors & Finish
Color Nickel
Finish Nickel Plate

Mounting
Mount Center(in) 5.98
Mount Position
Mount Side Right Hand
Mount Type Radial
Product Documents
Product Data Sheet

Click To Download
Installation Instructions

120-13267-N - Product Description

Forged Superlite 6 Radial Mount

FSL6R/ST calipers provide the pad wear performance advantages of differential bore pistons with the option for ultimate heat protection using Thermlock® pistons in the ST models. Differential piston bores compensate for leading-edge mechanical loading and temperature variances across the pad face to reduce pad taper wear in sustained high temperature applications. Thermlock® pistons in ST caliper models block heat transfer from the pads and reduce temperatures in the caliper, fluid, and seals by up to 25% over standard stainless steel pistons. Featuring either a Quick-Silver Nickel finish or Type III hard anodize, these are the go-to calipers for all types sustained hard braking on dirt and asphalt ovals and a wide range of off-road, rally and road course applications.

The FSL6R has been redesigned with internal fluid ports that eliminate the external fluid cross-over tubes. The transfer tube has been replaced with two additional bleed screw assemblies which allow differential bore models to have a left hand and right hand orientation, but no leading or trailing configuration is required. The most noteworthy feature of all the FSL6R caliper models is the exceptional strength and reduced weight of the forging. With assembled weights just at 4.4 pounds, the caliper body design in itself is a product of computer generated solid modeling and stress analysis technology. Each caliper features closed end bridges with a radial transition down to the main body and piston bore housings. The elimination of machined steps and sharp shoulders in this critical area provides a measurable increase in overall body strength and resistance to deflection under load. Every FSL6R body is stress-flow forged from a premium grade aluminum alloy billet.



Product Specifications

Rotor Compatibility
Rotor Width(in) 1.25
Maximum Rotor Width(in) 1.35
Minimum Rotor Width(in) 1.15
Maximum Rotor Diameter(in) 14
Minimum Rotor Diameter(in) 11.75

Brake Pad Specifications
Brake Pad Type 1 7420
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 8.2
Total Pad Volume (in³) 4.9
Mount
Piston Specifications
Piston 1 Bore(in) 1.62
Piston 2 Bore(in 1.12
Piston 3 Bore(in) 1.12
Piston 4 Bore(in)
Total Piston Area (in²) 4.04

Mounting Specifications
Mount Type Radial
Mount Side Right Hand
Mount Center(in) 5.98
Mount Hole Size(in) 0.39
Mount Height(in) 1.63
Inlet Thread Size 1/8-27 NPT

Additional Notes


Parts & Accessories

O-Ring Kit 130-5972
Replacement Dust Boot N-A
Replacement Piston 1 200-7553
Replacement Piston 2 200-7556
Replacement Piston 3 200-7556
Replacement Piston 4 N-A
Cross-Over O-Ring Kit 130-10540
Bridge Bolt Kit 230-5978
Wear Plate L/H 300-5923
Wear Plate R/H 300-5922
Pad Retainer N-A
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved