Forged Superlite 4R Radial Mount Caliper – Part No: 120-13828
Call (805) 388-1188
Forged Superlite 4 Radial Mount
Prod #: 120-13828
Price: $460.09
Forged Superlite 4 Radial Mount - Product Summary
Caliper No: 120-13828
Forged Superlite 4 Radial Mount

Pistons
Piston Count 4
Piston Area (in²) 5.18
Piston Type Thermlock
Dust Boot No
Rotor Dimensions
Rotor Width (in) 0.81
Rotor Diameter(in) 14.00
Pad Dimensions
Pad Area (in²) 8.2
Pad Volume (in³) 4.9
Duty Rating & Material
Material Forged Aluminium
Weight(Lbs) 5.5
Colors & Finish
Color Anodize
Finish Type III Anodize

Mounting
Mount Center(in) 5.98
Mount Position
Mount Side Right Hand
Mount Type Radial
UPC Number
UPC 889545089516
Product Documents
Product Data Sheet

Click To Download
Installation Instructions


WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

120-13828 - Product Description

Forged Superlite 4 Radial Mount

FSL4R/ST calipers provide the pad wear performance advantages of differential bore pistons with the option for ultimate heat protection using Thermlock® pistons in the ST models. Differential piston bores compensate for leading-edge mechanical loading and temperature variances across the pad face to reduce pad taper wear in sustained high temperature applications. Thermlock® pistons in the ST models block heat transfer from the pads and reduce temperatures in the caliper, fluid, and seals by up to 25% over standard stainless steel pistons. Featuring a wear resistant Type III hard anodize finish, these are the go-to calipers for all types sustained hard braking on dirt and asphalt ovals and a wide range of off-road, rally and road course applications.

The FSL4R has been redesigned with internal fluid ports that eliminate the external fluid cross-over tubes. The transfer tube has been replaced with two additional bleed screw assemblies which allow differential bore models to have a left hand and right hand orientation, but no leading or trailing configuration is required. The most noteworthy feature of all the FSL4R caliper models is the exceptional strength and reduced weight of the forging. With assembled weights just at 4.4 pounds, the caliper body design in itself is a product of computer generated solid modeling and stress analysis technology. Each caliper features closed end bridges with a radial transition down to the main body and piston bore housings. The elimination of machined steps and sharp shoulders in this critical area provides a measurable increase in overall body strength and resistance to deflection under load. Every FSL6R body is stress-flow forged from a premium grade aluminum alloy billet.



Product Specifications

Rotor Compatibility
Rotor Width (in) 0.81
Maximum Rotor Width (in) 0.90
Minimum Rotor Width (in) 0.75
Maximum Rotor Diameter(in) 14.00
Minimum Rotor Diameter(in) 11.75

Brake Pad Specifications
Brake Pad Type 1 7420
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 8.2
Total Pad Volume (in³) 4.9
Mount
Piston Specifications
Piston 1 Bore (in) 1.88
Piston 2 Bore (in) 1.75
Piston 3 Bore (in)
Total Piston Area (in²) 5.18

Mounting Specifications
Mount Type Radial
Mount Side Right Hand
Mount Center(in) 5.98
Mount Hole Size(in) 0.39
Mount Height(in) 1.63
Inlet Thread Size 1/8-27 NPT
Pad Dimensions & Part Numbers
Pad Dimensions for the Forged Superlite 4 Radial Mount Pad Dimensions for the Forged Superlite 4 Radial Mount Zoom Image
Axle Set P/N
Pad Type
Compound
Non-Bedded Pads - by Compounds
7420
BP-10
7420
BP-20
7420
BP-28
7420
BP-30
7420
BP-35
7420
BP-40
7420
BP-45
7420
BP-Q
7420
PolyMatrix H
Bedded-In Pads - by Compounds
7420
BP-40
7420
PolyMatrix B
7420
PolyMatrix H
Mount Dimensions for the Forged Superlite 4 Radial Mount Mount Dimensions for the Forged Superlite 4 Radial Mount Zoom Image
Mount Dimensions & Part Numbers

Dimensions for the Forged Superlite 4 Radial Mount Dimensions for the Forged Superlite 4 Radial Mount Zoom Image

Additional Notes


Parts & Accessories

O-Ring Kit 130-2427
Replacement Dust Boot N-A
Replacement Piston 1 200-7550
Replacement Piston 2 200-7551
Replacement Piston 3 N-A
Replacement Piston 4 N-A
Cross-Over O-Ring Kit 130-10540
Bridge Bolt Kit 230-5976
Wear Plate L/H 300-5923
Wear Plate R/H 300-5922
Pad Retainer N-A
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A
Products commonly used with this item:




$460.09
More Details
$13.65
More Details
$58.56
More Details
$58.56
More Details





Additional related products:




More Details
More Details





 
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright ©2021 Wilwood Engineering, Inc. - All Rights Reserved     
Version: 3.05 June 23, 2023