TC6 Caliper – Part No: 120-14317-RSR
Call (805) 388-1188
TC6 Radial Mount
Prod #: 120-14317-RSR
Price: $569.93
TC6 Radial Mount - Product Summary
Caliper No: 120-14317-RSR

Pistons
Piston Count 6
Piston Area (in²) 5.40
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width(in) 1.38
Rotor Diameter(in) 16
Pad Dimensions
Pad Area (in²) 13
Pad Volume (in³) 6
Duty Rating & Material
Material Aluminum
Weight(Lbs) 9.2
Colors & Finish
Color Red
Finish Red Powder Coat

Mounting
Mount Center(in) 8.27
Mount Position Rear Mount
Mount Side Right Hand
Mount Type Radial
UPC Number
UPC 889545079012
Product Documents
Product Data Sheet

Installation Instructions


WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

120-14317-RSR - Product Description

TC6 Radial Mount

The TC 6R Radial Mount Caliper represents a complete new generation of refinement in Big Brake Technology from Wilwood. Six stainless pistons captured within a massive high strength forged aluminum body generate the stopping power and durability to stylishly handle the heavy loads of custom late model trucks and sport utility vehicles.

TC 6R calipers are stress flow forged from premium grade, billet aluminum alloy blanks. FEA structural analysis technology was employed to develop a design that minimizes weight, and maximizes rigidity against deflection. The expanded bridge radius easily accommodates 1.38" thick rotors up to a full 16 inches in diameter. The bodies are joined and reinforced through the bridge with six high strength coated steel alloy bolts. Cross bridge bolts add strength against deflection and body separation at high pressures and heavy loads. Steel insert plates protect the bridges against wear and gouging from the load bearing edges of the brake pads.

The TC 6R, starting at 8.66 pounds, generates unmatched pad clamping efficiency through six thick walled stainless steel pistons. Heavier piston walls add a measure of strength against deflection or distortion in heavy load conditions. Stainless steel is used to resist corrosion and reduce the heat being transferred from the pads into the caliper body, seals, and fluid. The differential piston bore design is taken from Wilwood racing caliper technology. Clamping pressure is proportionately distributed to provide balanced pad loading with even wear properties at all loads and temperatures. The piston bore volumes are configured for matched compatibility with the output capacities of the OE master cylinder and power boost systems.



Product Specifications

Rotor Compatibility
Rotor Width(in) 1.38
Maximum Rotor Width(in) 1.38
Minimum Rotor Width(in) 1.32
Maximum Rotor Diameter(in) 16
Minimum Rotor Diameter(in) 14

Brake Pad Specifications
Brake Pad Type 1 6318
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 13
Total Pad Volume (in³) 6
Mount
Piston Specifications
Piston 1 Bore(in) 1.75
Piston 2 Bore(in 1.38
Piston 3 Bore(in) 1.38
Piston 4 Bore(in)
Total Piston Area (in²) 5.40

Mounting Specifications
Mount Type Radial
Mount Side Right Hand
Mount Center(in) 8.27
Mount Hole Size(in) 0.45
Mount Height(in) 2.56
Inlet Thread Size 1/8-27 NPT
Pad Dimensions & Part Numbers
Mount Dimensions & Part Numbers

Additional Notes

The total TC 6R package is capped off with rubber dampened fluid transfer tubes, recessed two-piece bleed screws, and bridge mounted pad-dampening springs. Pad dampening springs reduce vibration, road rattle, and many of the engagement harmonics that can cause squeal or other harsh brake noise. Choices of either a signature high luster anodized Wilwood black, or a special multi-process gloss red coating, enhance the pure stopping power of the TC 6R with high tech style and a total custom look inside the wheels.

Radial mount adapter brackets are used in Wilwood brake kits to provide a secure and precise method of attaching the TC 6R caliper to the factory mount bosses on the original spindle.


Parts & Accessories

O-Ring Kit 130-3084
Replacement Dust Boot N-A
Replacement Piston 1 200-7528
Replacement Piston 2 200-7518
Replacement Piston 3 200-7518
Replacement Piston 4 N-A
Cross-Over O-Ring Kit N-A
Bridge Bolt Kit 230-9171
Wear Plate L/H 300-8894
Wear Plate R/H 300-8893
Pad Retainer N-A
Bleed Screw Kit 220-6069
Self Bleeder Tube N-A
Cross-Over Tube 190-9172




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved