AT6 Lug Mount Caliper – Part No: 120-14850
Call (805) 388-1188
AT6 Lug Mount
Prod #: 120-14850
Price: $665.94
AT6 Lug Mount - Product Summary
Caliper No: 120-14850

Pistons
Piston Count 6
Piston Area (in²) 5.40
Piston Type Stainless
Dust Boot No
Rotor Dimensions
Rotor Width (in) 0.72
Rotor Diameter(in) 12.30
Pad Dimensions
Pad Area (in²) 11.31
Pad Volume (in³) 5
Duty Rating & Material
Material Aluminum
Weight(Lbs) 6.2
Colors & Finish
Color Ano
Finish Type III Ano

Mounting
Mount Center(in) 6.88
Mount Position
Mount Side Right Hand
Mount Type Lug
UPC Number
UPC 889545083613
Product Documents
Product Data Sheet

Click To Download
Installation Instructions


WARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov
Applicable to Brake Pads Only

120-14850 - Product Description

AT6 Lug Mount

Wilwood’s AT6 forged aluminum racing caliper is designed, engineered, and purpose built to endure the rigors of off-road truck and buggy racing. The AT6 combines the latest technologies in manufacturing materials and processes in the most popular mounting configuration built “tough enough for Baja.” The caliper covers a wide range of racing classes in SCORE, BITD, Ultra-4, Pre-Runner, and all similar sanctions of desert and off-road competition, and is well suited for both short course and endurance length events. AT6 calipers feature high-strength, lightweight forged aluminum lug mount body with the popular 6.88” mount centers. MIL-Spec Type III hard anodizing is applied to all surfaces on all models for long wear and abrasion resistance. A massive bolt-in center bridge support adds stiffness and top-side pad access. Thermlock pistons are also available as an upgrade.

Six-piston, progressive differential bore configuration provides even pad wear through balanced loading. Stainless steel pistons reduce heat transfer and resist all corrosion. Internal seal-in-bore design provides controlled retraction without the issues common to external boots. Internal damper springs reduce deflection induced pad knock-back. Replaceable stainless steel, spring loaded bridge abutment plates. Uses large volume type 7516 pads. Also available with gloss red or black



Product Specifications

Rotor Compatibility
Rotor Width (in) 0.72
Maximum Rotor Width (in) 0.72
Minimum Rotor Width (in) 0.66
Maximum Rotor Diameter(in) 12.30
Minimum Rotor Diameter(in) 12.30

Brake Pad Specifications
Brake Pad Type 1 7516
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 11.31
Total Pad Volume (in³) 5
Mount
Piston Specifications
Piston 1 Bore (in) 1.75
Piston 2 Bore (in) 1.38
Piston 3 Bore (in) 1.38
Total Piston Area (in²) 5.40

Mounting Specifications
Mount Type Lug
Mount Side Right Hand
Mount Center(in) 6.88
Mount Hole Size(in) 0.39
Mount Height(in) 2.62
Inlet Thread Size 1/8-27 NPT
Pad Dimensions & Part Numbers
Mount Dimensions & Part Numbers

Additional Notes


Parts & Accessories

O-Ring Kit 130-3084
Replacement Dust Boot N-A
Replacement Piston 1 200-7528
Replacement Piston 2 200-7518
Replacement Piston 3 200-7518
Replacement Piston 4 N-A
Cross-Over O-Ring Kit 130-10540
Bridge Bolt Kit 300-14692
Wear Plate L/H 300-6595
Wear Plate R/H 300-9596
Pad Retainer
Bleed Screw Kit 220-0627
Self Bleeder Tube N-A
Cross-Over Tube N-A


Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2019 Wilwood Engineering, Inc. - All Rights Reserved