Northeast Dirt Modified Master Cylinders


Bracket Kit, Dual Billet Reservoir
Bore Size: 0.000"
Material: Aluminum

Bracket Kit, Dual Billet Reservoir Bracket Kit, Dual Billet Reservoir Zoom Image

Bracket Kit, Dual Billet Reservoir Drawing Bracket Kit, Dual Billet Reservoir Drawing Zoom Image

Bracket Kit, Dual Billet Reservoir Description

Wilwood’s new Billet Reservoir brackets are made from high strength aluminum alloy and available in a plain billet finish or type III anodize finish. Available in both single and dual reservoir configurations.



Ordering Information for Bracket Kit, Dual Billet Reservoir
Item No 250-16393
Info Details
Type -
Finish Type III Ano
Bore Size -
Price $59.77
Purchase
Call (805) 388-1188
Combination Remote Master Cylinder
Bore Size: 5/8" to 1-1/8"
Material: Aluminum / Plastic

Combination Remote Master Cylinder Combination Remote Master Cylinder Zoom Image

Combination Remote Master Cylinder Drawing Combination Remote Master Cylinder Drawing Zoom Image

Combination Remote Master Cylinder Description

Wilwood’s Combination Remote Master Cylinder features direct and remote reservoir mounting, two reservoir sizes, and a stroke of 1-1.3” depending on bore size.





Ordering Information for Combination Remote Master Cylinder
Item No 260-3372
Info Details
Type Single Outlet
Finish Bare
Bore Size 5/8"
Price $104.43
Purchase
Call (805) 388-1188
Item No 260-3374
Info Details
Type Single Outlet
Finish Bare
Bore Size 3/4"
Price $104.43
Purchase
Call (805) 388-1188
Item No 260-5920
Info Details
Type Single Outlet
Finish Bare
Bore Size 13/16"
Price $104.43
Purchase
Call (805) 388-1188
Item No 260-3376
Info Details
Type Single Outlet
Finish Bare
Bore Size 7/8"
Price $104.43
Purchase
Call (805) 388-1188
Item No 260-3378
Info Details
Type Single Outlet
Finish Bare
Bore Size 1.00"
Price $104.43
Purchase
Call (805) 388-1188
Item No 260-3380
Info Details
Type Single Outlet
Finish Bare
Bore Size 1-1/8"
Price $104.43
Purchase
Call (805) 388-1188
Compact Remote Flange Mount Master Cylinder
Bore Size: 5/8" to 1-1/8"
Material: Aluminum / Plastic

Compact Remote Flange Mount Master Cylinder Compact Remote Flange Mount Master Cylinder Zoom Image

Compact Remote Flange Mount Master Cylinder Drawing Compact Remote Flange Mount Master Cylinder Drawing Zoom Image

Compact Remote Flange Mount Master Cylinder Description

Wilwood’s Compact Remote Combination Master Cylinder, commonly called our “shorty” master cylinder; only 3.375”long, is about the size of a roll of quarters. It’s available in bore sizes from 5/8" to 1.125”, and with or without reservoirs.





Ordering Information for Compact Remote Flange Mount Master Cylinder
Item No 260-10371
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 5/8"
Price $104.70
Purchase
Call (805) 388-1188
Item No 260-10372
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 3/4"
Price $104.70
Purchase
Call (805) 388-1188
Item No 260-10373
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 13/16"
Price $112.53
Purchase
Call (805) 388-1188
Item No 260-10374
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 7/8"
Price $104.70
Purchase
Call (805) 388-1188
Item No 260-14784
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 15/16"
Price $112.53
Purchase
Call (805) 388-1188
Item No 260-10375
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 1.00"
Price $104.70
Purchase
Call (805) 388-1188
Item No 260-10376
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 1-1/8"
Price $112.53
Purchase
Call (805) 388-1188
Compact Remote Flange Mt Master Cyl-Banjo Outlet
Bore Size: 5/8" to 1-1/8"
Material: Aluminum / Plastic

Compact Remote Flange Mt Master Cyl-Banjo Outlet Compact Remote Flange Mt Master Cyl-Banjo Outlet Zoom Image

Compact Remote Flange Mt Master Cyl-Banjo Outlet Drawing Compact Remote Flange Mt Master Cyl-Banjo Outlet Drawing Zoom Image

Compact Remote Flange Mt Master Cyl-Banjo Outlet Description

Wilwood’s Compact Remote Combination Master Cylinder, commonly called our “shorty” master cylinder; only 3.375”long, is about the size of a roll of quarters. Now with a 3/8-24 Banjo outlet, It’s available in bore sizes from 5/8" to 1-1/8”, and with or without reservoirs.





Ordering Information for Compact Remote Flange Mt Master Cyl-Banjo Outlet
Item No 260-13618
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 5/8"
Price $108.06
Purchase
Call (805) 388-1188
Item No 260-13619
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 3/4"
Price $108.06
Purchase
Call (805) 388-1188
Item No 260-13620
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 13/16"
Price $115.83
Purchase
Call (805) 388-1188
Item No 260-13621
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 7/8"
Price $108.06
Purchase
Call (805) 388-1188
Item No 260-14787
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 15/16"
Price $115.83
Purchase
Call (805) 388-1188
Item No 260-13622
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 1.00"
Price $108.06
Purchase
Call (805) 388-1188
Item No 260-13623
Info Details
Type Single Outlet
Finish Black E-coat
Bore Size 1-1/8"
Price $115.83
Purchase
Call (805) 388-1188
Lightweight Reservoir Kit -Direct Mount
Bore Size: 0.000"
Material: Aluminum

Lightweight Reservoir Kit
-Direct Mount Lightweight Reservoir Kit -Direct Mount Zoom Image

Lightweight Reservoir Kit
-Direct Mount Drawing Lightweight Reservoir Kit -Direct Mount Drawing Zoom Image

Lightweight Reservoir Kit -Direct Mount Description

Machined billet aluminum reservoir has the classic finned look of traditional hot rod speed parts, for lighter weight and passive cooling. Choose from bright machined aluminum with matching cap (4.6 ounce weight) or Type III hard anodized gray with a black nylon cap (3.8 ounce weight), with internal rubber bellow cap seal. Both durable reservoirs hold 4 fluid ounces for brake or clutch master cylinder. Billet clamps, stainless flex lines, and fittings available for remote mount to Wilwood Remote Tandem or Compact Remote Master Cylinders, or mount directly with a 9/16-18 to 11/16-20 fitting and O-ring.



Ordering Information for Lightweight Reservoir Kit -Direct Mount
Item No 260-16391
Info Details
Type -
Finish Type III Ano
Bore Size -
Price $119.62
Purchase
Call (805) 388-1188
Lightweight Reservoir Kit -Remote Mount
Bore Size: 0.000"
Material: Aluminum

Lightweight Reservoir Kit
-Remote Mount Lightweight Reservoir Kit -Remote Mount Zoom Image

Lightweight Reservoir Kit
-Remote Mount Drawing Lightweight Reservoir Kit -Remote Mount Drawing Zoom Image

Lightweight Reservoir Kit -Remote Mount Description

Machined billet aluminum reservoir has the classic finned look of traditional hot rod speed parts, for lighter weight and passive cooling. Choose from bright machined aluminum with matching cap (4.6 ounce weight) or Type III hard anodized gray with a black nylon cap (3.8 ounce weight), with internal rubber bellow cap seal. Both durable reservoirs hold 4 fluid ounces for brake or clutch master cylinder. Billet clamps, stainless flex lines, and fittings available for remote mount to Wilwood Remote Tandem or Compact Remote Master Cylinders, or mount directly with a 9/16-18 to 11/16-20 fitting and O-ring.



Ordering Information for Lightweight Reservoir Kit -Remote Mount
Item No 260-16392
Info Details
Type -
Finish Type III Ano
Bore Size -
Price $119.62
Purchase
Call (805) 388-1188
Proportioning Valve
Bore Size: 0.000"
Material: Aluminum / Steel

Proportioning Valve Proportioning Valve Zoom Image

Proportioning Valve Drawing Proportioning Valve Drawing Zoom Image

Proportioning Valve Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 150-1200 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. Adjuster knob with fine thread tuning provides precise pressure adjustment. Valves weigh only 5.2 ounces and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.



Ordering Information for Proportioning Valve
Item No 260-8419
Info Details
Type -
Finish Clear Anodize
Bore Size -
Price $52.32
Purchase
Call (805) 388-1188
Proportioning Valve
Bore Size: 0.000"
Material: Aluminum / Steel

Proportioning Valve Proportioning Valve Zoom Image

Proportioning Valve Drawing Proportioning Valve Drawing Zoom Image

Proportioning Valve Description

The new generation of adjustable proportioning valves combines the latest refinements to deliver precise pressure metering and strength from a compact forged billet design. Pressure adjustments range from 150-1200 PSI and provide for a maximum decrease of 57% in line pressure, the most of any available valve. This proportioning valve has six preset points actuated by moving a lever allowing racers to quickly adjust brake bias during a race. The lever “clicks” into the six positions for positive adjustment. Valves weigh only 6.1 ounces (lever), and have two .25” side mounting holes spaced 1.00” apart. Inlet / outlet ports are 1/8-27 NPT and valves are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.



Ordering Information for Proportioning Valve
Item No 260-8420
Info Details
Type -
Finish Clear Anodize
Bore Size -
Price $103.87
Purchase
Call (805) 388-1188
Residual Pressure Valve
Bore Size: 0.000"
Material: Aluminum

Residual Pressure Valve Residual Pressure Valve Zoom Image

Residual Pressure Valve Drawing Residual Pressure Valve Drawing Zoom Image

Residual Pressure Valve Description

Wilwood's two, four and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. Four pound valves can be beneficial in high vibration brake systems such as off-road or dirt circle track racing. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves are available with or without additional fittings. Valves with fittings are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.



Ordering Information for Residual Pressure Valve
Item No 260-13707
Info Details
Type -
Finish Red Anodize
Bore Size -
Price $22.38
Purchase
Call (805) 388-1188
Residual Pressure Valve
Bore Size: 0.000"
Material: Aluminum

Residual Pressure Valve Residual Pressure Valve Zoom Image

Residual Pressure Valve Drawing Residual Pressure Valve Drawing Zoom Image

Residual Pressure Valve Description

Wilwood's two, four and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. Four pound valves can be beneficial in high vibration brake systems such as off-road or dirt circle track racing. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves are available with or without additional fittings. Valves with fittings are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.



Ordering Information for Residual Pressure Valve
Item No 260-13706
Info Details
Type -
Finish Blue Anodize
Bore Size -
Price $22.38
Purchase
Call (805) 388-1188
Residual Pressure Valve
Bore Size: 0.000"
Material: Aluminum

Residual Pressure Valve Residual Pressure Valve Zoom Image

Residual Pressure Valve Drawing Residual Pressure Valve Drawing Zoom Image

Residual Pressure Valve Description

Wilwood's two, four and ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is mounted below the horizontal plane of the calipers and fluid drain back occurs from gravity and vibration, thereby causing excessive caliper piston retraction and a longer brake pedal stroke. The minimal two pound residual pressure prevents fluid from flowing back without causing the brakes to drag. Four pound valves can be beneficial in high vibration brake systems such as off-road or dirt circle track racing. With drum brakes, a ten pound valve is used to compensate for return spring tension and maintain wheel cylinder sealing in the drums. Residual Pressure Valves are made from billet aluminum and color coded for easy identification. Valves are available with or without additional fittings. Valves with fittings are supplied with two 1/8-27 NPT to 3/8-24 inverted flare female fittings that will fit most domestic 3/16th hard brake lines.



Ordering Information for Residual Pressure Valve
Item No 260-15365
Info Details
Type -
Finish Gold Anodize
Bore Size -
Price $24.93
Purchase
Call (805) 388-1188
Shutoff Valve
Bore Size: 0.000"
Material: Aluminum / Steel

Shutoff Valve Shutoff Valve Zoom Image

Shutoff Valve Drawing Shutoff Valve Drawing Zoom Image

Shutoff Valve Description

This valve can be used as a brake shut-off. When energized, the valve will block pressure from reaching downstream. The valve does not prevent fluid from returning to the master cylinder. This eliminates the possibility of trapping pressure when activating the valve. Requires a 12 Volt, 5 amp (recommended) fused power source through a toggle switch.

Warning: Not a line lock assembly. Not for street use. Please read instruction sheet DS572 before attempting installation.



Ordering Information for Shutoff Valve
Item No 260-9921
Info Details
Type -
Finish Clear Anodize
Bore Size -
Price $193.98
Purchase
Call (805) 388-1188

All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2022 Wilwood Engineering, Inc. - All Rights Reserved
Version: 3.05 June 24, 2022
​ ​