Search: bias bar


Product Groups found: 34
Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12410 is for rear engine cars and does not include a throttle bell crank and linkage. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$455.29
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$575.74
340-12411
Call (805) 388-1188

Brake / Clutch and Throttle Pedal

Brake / Clutch and Throttle Pedal

Wilwood’s new floor mount pedal assembly has a brake / clutch / throttle triple pedal design. There are three individual fabricated steel pedals with non-slip pedal pads to control brake, clutch and throttle. Pedal assembly part number 340-12411 is for front engine cars and includes a throttle bell crank and linkage assembly. This unit features an aluminum frame with strong lightweight fabricated steel pedal arms. The frame and the pedal arms have a black e-coat finish for protection and an attractive appearance. Also included with the pedal assembly are mounting studs, clevises, and balance bar assembly that is designed to provide smooth and accurate settings of the brake pedal bias. The balance bar can be set and locked down with the jam nut, or attached to a remote cable for quick on-track adjustments. The pedal assembly provides a 5.25 to 1 nominal ratio.

Ordering Information for Brake / Clutch and Throttle Pedal
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS
$455.29
340-12410
Call (805) 388-1188
Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE
$575.74
340-12411
Call (805) 388-1188

60 Degree Mount Tru-Bar Pedal

60 Degree Mount Tru-Bar Pedal

This Tru-bar unit is ideal for Sprint Cars, Midgets, Dirt Modifieds, or any application where the master cylinders must be mounted remotely from the pedal. This unit features a variable leverage, machined billet pivot arm that multiplies input force on average by 1.5:1 - a 5:1 pedal becomes 7.5:1, 6:1 becomes 9:1. To accommodate fitment where space is at a premium, the master cylinders mount one above the other, twisted 60 degrees with remote fluid reservoirs. When mounted within the driver's reach, the included knob can adjust bias on track quickly and easily.

Wilwood's Remote Mount Tru-Bar pedal utilizes a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments to deliver professional, championship caliber braking performance. A larger diameter 7/16-20 bar is more rigid and provides quicker adjustment, with a 3/8" diameter end that works with standard remote adjuster cables. It provides the ultimate in precision bias adjustment, control, and fine-tuning on race vehicles equipped with dual brake master cylinder systems and proportionally sized calipers.

Ordering Information for 60 Degree Mount Tru-Bar Pedal
Details
PEDAL ASSEMBLY,DUAL M/C,60 DEG,REMOTE TRUNNION
$349.75
340-14380
Call (805) 388-1188

Swing Mount Tru-Bar Brake and Clutch Pedal

Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,FORWARD MT,6.25:1,TRIPLE M/C,TRUNNION
$548.83
340-15072
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$548.83
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$548.83
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$548.83
340-15075
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$463.62
340-15076
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$548.83
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$548.83
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$548.83
340-15075
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$463.62
340-15077
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Reverse Swing Mount Tru-Bar Brake and Clutch Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio and 5;1 clutch. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake and Clutch Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$548.83
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$548.83
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,BRAKE TRIPLE M/C,5:1 CLUTCH,TRUNNION
$548.83
340-15075
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal

Reverse Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 5:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,TRIPLE M/C TRUNNION
$548.83
340-15073
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$463.62
340-15076
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$463.62
340-15077
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal

Reverse Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Reverse Swing mount pedal with a 6.25:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,TRIPLE M/C,TRUNNION
$548.83
340-15074
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,5:1,DUAL M/C TRUNNION
$463.62
340-15076
Call (805) 388-1188
Details
PEDAL ASSEMBLY,REVERSE MT,6.25:1,DUAL M/C,TRUNNION
$463.62
340-15077
Call (805) 388-1188

Floor Mount Tru-Bar Brake Pedal

Floor Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Floor mount pedal with a 6:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Floor Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,6:1,DUAL M/C,TRUNNION
$417.12
340-15078
Call (805) 388-1188

Swing Mount Tru-Bar Brake Pedal

Swing Mount Tru-Bar Brake Pedal

Wilwood’s Tru-Bar balance bar system is now available in a Forward Swing mount pedal with a 7:1 ratio. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control, and adjustment of the brake bias on race prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance. Wilwood’s Tru-Bar balance bar utilizes a fixed trunnion bearing in the pedal arm with spherical rod ends at the pushrod connections. It provides the ultimate in precision bias adjustment, control, and fine tuning on race prepped vehicles equipped with twin brake Master cylinder systems and proportionately sized calipers.

Ordering Information for Swing Mount Tru-Bar Brake Pedal
Details
PEDAL ASSEMBLY,7:1,DUAL M/C,TRUNNION
$417.12
340-15079
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal with offset clutch pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 5 to 7 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$373.73
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$373.73
340-16382
Call (805) 388-1188

Floor Mount Brake Pedal-Adustble Ratio

Floor Mount Brake Pedal-Adustble Ratio

Adjustable ratio balance bar single brake pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Brake Pedal-Adustble Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FLOOR MT ADJUSTABLE RATIO,5.25-6:1
$218.16
340-16376
Call (805) 388-1188

Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio

Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio

Adjustable ratio Tru-Bar single brake pedal, in a floor mount assembly. Pedal head adjusts vertically to provide a 5.25, 5.63, or 6.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference.The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FLOOR MT ADJUSTABLE RATIO,5.25-6:1,TRUNNION
$503.75
340-16377
Call (805) 388-1188

Swing Mount Brake Pedal-Adjusatble Ratio

Swing Mount Brake Pedal-Adjusatble Ratio

Adjustable ratio balance bar brake pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference.The pedal feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake Pedal-Adjusatble Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FORWARD MT ADJUSTABLE RATIO,6.25-7:1
$218.16
340-16379
Call (805) 388-1188

Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio

Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio

Adjustable ratio Tru-Bar balance bar brake pedal, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 6.25, 6.63, or 7.00:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly through the firewall, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arm. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Tru-Bar Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,FORWARD MT ADJUSTABLE RATIO,6.25-7:1,TRUNNION
$503.75
340-16380
Call (805) 388-1188

Swing Mount Brake and Clutch Pedal-Adj Ratio

Swing Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FORWARD MT,HD,2.00 OFFSET CLUTCH,ADJ RATIO,5.50-6.25:1,TRIPLE M/C
$373.73
340-16350
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FORWARD MT BRAKE/CLUTCH,ADJUSTABLE RATIO,5.5-6.25:1
$373.73
340-16382
Call (805) 388-1188

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio

Adjustable ratio Tru-Bar balance bar brake pedal and clutch pedal combo, in a forward swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly through the firewall, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,FWD MT,BRAKE/ CLUTCH,ADJ RATIO,5.5-6.25:1,TRUNNION
$657.88
340-16383
Call (805) 388-1188

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Reverse Swing Mount Brake and Clutch Pedal-Adj Rt

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$373.73
340-16385
Call (805) 388-1188

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj

Adjustable ratio balance bar brake pedal and clutch pedal combo, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. A clutch master cylinder and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3 to 5 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Rev Swing Mnt Tru-Bar Brake and Clutch Pedal-Adj
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,BRAKE/CLUTCH REVERSE MT,ADJ RATIO,5.5-6.25:1,TRUNNION
$657.88
340-16386
Call (805) 388-1188

Reverse Swing Mount Brake Pedal-Adj Ratio

Reverse Swing Mount Brake Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Brake Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1
$272.72
340-16387
Call (805) 388-1188

Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio

Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a reverse swing hanging assembly. Pedal head adjusts vertically to provide a 5.50, 5.88, or 6.25:1 ratio for more feel or less pedal effort. Two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pad can be laterally adjusted 1/2 inch in either direction for driver preference. The pedal features a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts any two Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Reverse Swing Mount Tru-Bar Brake Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,DUAL M/C,BRAKE,REVERSE MT,ADJUSTABLE RATIO,5.5-6.25:1,TRUNNION
$555.75
340-16388
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$528.47
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$675.10
340-16603
Call (805) 388-1188

Brake / Clutch and Throttle Pedal-Adj Ratio

Brake / Clutch and Throttle Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Brake / Clutch and Throttle Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJUSTABLE RATIO
$528.47
340-16602
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJUSTABLE RATIO
$675.10
340-16603
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly for rear engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes a pull rod for rear engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms.The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$767.17
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$920.62
340-16605
Call (805) 388-1188

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount throttle, brake and clutch pedal assembly with throttle linkage for front engine cars. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The throttle pedal includes an adjustable ratio bell crank for front engine applications. The non-skid waffled pedal pads can be laterally adjusted to place the clutch and brake from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Tru-Bar Brake / Clutch and Throttle Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/O THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$767.17
340-16604
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH/GAS W/THROTTLE LINKAGE,ADJ RATIO,TRUNNION
$920.62
340-16605
Call (805) 388-1188

Floor Mount Brake and Clutch Pedal-Adj Ratio

Floor Mount Brake and Clutch Pedal-Adj Ratio

Adjustable ratio balance bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Brake and Clutch Pedal-Adj Ratio
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO
$409.12
340-16606
Call (805) 388-1188

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 4.75, 5.25, or 5.75:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25 inch vertical mount flange single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO,TRUNNION
$995.64
340-16607
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,REVERSE FLOOR MT,BRAKE/CLUTCH,ADJ RATIO,TRUNNION
$712.74
340-17804
Call (805) 388-1188

Universal Tandem Mount Balance Bar Assembly

Universal Tandem Mount Balance Bar Assembly

Wilwood’s Tandem Mount Balance Bar Assembly bolts in place of a typical horizontal bolt pattern tandem master cylinder and provides a sturdy mounting location for two race-type vertical bolt pattern master cylinders, with no custom fabrication needed. Providing The ultimate in brake bias control for performance and race vehicles is an adjustable balance bar with dual master cylinders. Ideal for modified street cars/trucks needing fast and easy brake bias adjustability to optimize braking for different performance driving situations and skillsets.

Ordering Information for Universal Tandem Mount Balance Bar Assembly
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY
$261.34
340-16920
Call (805) 388-1188
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY W/EYELET
$279.16
340-16928
Call (805) 388-1188

Universal Tandem Mount Balance Bar Assy w/Eyelet

Universal Tandem Mount Balance Bar Assy w/Eyelet

Wilwood’s Tandem Mount Balance Bar Assembly bolts in place of a typical horizontal bolt pattern tandem master cylinder and provides a sturdy mounting location for two race-type vertical bolt pattern master cylinders, with no custom fabrication needed. Providing The ultimate in brake bias control for performance and race vehicles is an adjustable balance bar with dual master cylinders. Ideal for modified street cars/trucks needing fast and easy brake bias adjustability to optimize braking for different performance driving situations and skillsets.

Ordering Information for Universal Tandem Mount Balance Bar Assy w/Eyelet
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY
$261.34
340-16920
Call (805) 388-1188
*New* Details
TANDEM MOUNT BALANCE BAR ASSEMBLY W/EYELET
$279.16
340-16928
Call (805) 388-1188

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Floor Mount Clutch / Brake Pedal-Adjustable Ratio

Adjustable ratio balance bar brake pedal, in a reverse floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 5.25, or 6.00:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with an adjustable balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The balance bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. A pin and clevis pushrod attachment system ensures the smallest possible misalignment angle for bind free operation through the entire range of travel. This pedal accepts three Wilwood 2.25-inch vertical mount flange, remote inlet, single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Clutch / Brake Pedal-Adjustable Ratio
*New* Details
PEDAL ASSEMBLY,SINGLE M/C,CLUTCH/BRAKE FLOOR MT,ADJ RATIO,5.25-6:1
$161.89
340-16378
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,REVERSE FLOOR MT,BRAKE/CLUTCH,ADJUSTABLE RATIO
$465.24
340-17803
Call (805) 388-1188

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt

Adjustable ratio Tru-Bar brake pedal, in a floor mount brake and clutch pedal assembly. Pedal head adjusts vertically to provide a 5.25, or 6.00:1 ratio for more feel or less pedal effort. A clutch and two brake master cylinders mount to the assembly, with a friction-free, trunnion based adjustable Tru-Bar balance bar providing front to rear brake bias fine tuning. The non-skid waffled pedal pads can be laterally adjusted to be from 3.75 to 5.75 inches on center for driver preference. The pedals feature a lightweight aluminum frame, with high strength reinforced I-beam style forged pedal arms. The Tru-Bar incorporates a positive detent stop every full turn to maintain adjustment position and can be locked in place with the included jam nut, or used with an optional remote knob for quick on-track adjustments. Tru-Bar pedals utilize a fixed trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments reducing compliance and friction for more accurate brake feel. Tru-Bar pedals utilize the same chassis and master cylinder mounting as Wilwood balance bar style pedals. This pedal accepts three Wilwood 2.25-inch vertical mount flange, remote inlet, single outlet master cylinders, available separately in a variety of styles and bore sizes.

Ordering Information for Floor Mount Tru-Bar Brake and Clutch Pedal-Adj Rt
*New* Details
PEDAL ASSEMBLY,FLOOR MT,BRAKE/CLUTCH ADJUSTABLE RATIO,TRUNNION
$995.64
340-16607
Call (805) 388-1188
*New* Details
PEDAL ASSEMBLY,TRIPLE M/C,REVERSE FLOOR MT,BRAKE/CLUTCH,ADJ RATIO,TRUNNION
$712.74
340-17804
Call (805) 388-1188

60 Degree Mount Pedal

60 Degree Mount Pedal

This lightweight 1.8-pound unit is ideal for Sprint Cars, Midgets, Dirt Modifieds, or any application where the master cylinders must be mounted remotely from the pedal. This unit features a variable leverage, machined billet pivot arm that multiplies input force on average by 1.5:1 - a 5:1 pedal becomes 7.5:1, 6:1 becomes 9:1. To accommodate fitment where space is at a premium, the master cylinders are mounted one above the other, twisted 60 degrees with remote fluid reservoirs. The balance bar incorporates a positive detent stop each complete turn to maintain setting and facilitate on-track driver adjustment.

Wilwood's Remote Mount Pedal uses a pin and clevis pushrod attachment system that provides the highest possible degree of misalignment angle for bind-free operation through the entire range of travel. It gives precision bias adjustment, control, and fine-tuning on race vehicles equipped with dual brake master cylinder systems and proportionally sized calipers. When mounted within the driver's reach, the included adjustment knob can be used for quick and easy bias adjustments, or a remote adjuster cable can be attached.

Ordering Information for 60 Degree Mount Pedal
Details
PEDAL ASSEMBLY,DUAL M/C,60 DEG,REMOTE
$280.05
340-4630
Call (805) 388-1188

Remote Bias Adjuster

Remote Bias Adjuster

Wilwood’s Remote Balance Bar Cable Adjuster is used with balance bars to adjust front-to-rear brake bias during changing race conditions. The highly visible bright blue knob features a special bi-directional detente control providing the driver with positive adjustment feedback. The special five foot cable and housing (which can be cut to any length for a custom fit) provides an optimum bending radius for easy installation and smooth performance in tight confines. The assembly comes with two label faces for either front-to-rear or rear-to-front adjustment. Standard 3/8-24 thread fits Wilwood and most commonly used balance bars.

Ordering Information for Remote Bias Adjuster
Details
REMOTE BRAKE BIAS ADJUSTER
$65.17
340-4990
Call (805) 388-1188



PDFs found: 5

Wilwood Disc Brakes Introduces New Tru-Bar 60 Degree Remote Pedal Master Cylinder Mount

Wilwood’s Tru-Bar 60 Degree Master Cylinder Mount for remote brake pedal applications utilizes a fixed trunnion bearing within the pivot lever and pushrod spherical bearing ends. This provides smooth operation and precise adjustment of the brake bias with zero chance of balance migration, eliminating all side play.

Wilwood Engineering’s New Tru-Bar Balance Bar Pedal System

Wilwood’s Tru-Bar balance bar system is now available in the eight popular pedal styles used in virtually all types of competition applications. Tru-Bar pedals utilize a fixed-trunnion bearing in the pedal arm, with spherical rod-end bearing pushrod attachments. They provide ultimate precision, control and adjustment of the brake bias on race-prepped vehicles. The new Tru-Bar pedals utilize the same chassis and master cylinder mounting as all Wilwood balance bar style pedals. A stronger and larger diameter 7/16-20 bar provides quicker adjustment and features a shouldered 3/8” diameter end to attach the standard remote adjuster cable to deliver professional, championship caliber performance.

Wilwood Disc Brakes Releases Tru-Bar Adjustable Race Pedal Assemblies

Wilwood Racing’s new forged aluminum race pedals now adjust for leverage ratio, plus horizontal pad placement. The innovative design allows vertical pedal pad adjustment for fine-tuning pedal feel and performance. Combined with Wilwood’s precision front-to-rear bias control Tru-Bar trunnion system, these pedals are like no other.

Wilwood Disc Brakes Releases Tandem Mount Balance Bar Assembly

For the ultimate control on the street or track, dual master cylinders with an adjustable balance bar allow brake bias to be fine-tuned to conditions and driver preference. Wilwood’s new solution is the Tandem Mount Balance Bar Assembly, giving modified street cars and trucks the precision-control usually reserved for race vehicles. This lightweight, forged billet aluminum assembly bolts to the firewall, replacing the tandem master cylinder with a balance bar and dual master cylinder mounts.

Wilwood Racing Releases Reverse Floor Mount Trunnion Brake & Clutch Pedal Assembly

Wilwood Racing has engineered two new reverse floor mount brake pedal assemblies, one with a standard bias adjuster Balance Bar and the other with a precision Tru-Bar. Both models incorporate an adjustable clutch pedal assembly.


All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
Copyright © 1977 - 2025 Wilwood Engineering, Inc. - All Rights Reserved

​ ​