Search Wilwood Brake Kits

Brake Kits Found: 15
Number of Pistons
4
8
Axle Offset
Rotor Diameter
Wheel Diameter*
Caliper Mount

*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-12554
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,597.06

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-12556
Pistons: 8
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,597.06

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-14140
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,597.06

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-14142
Pistons: 8
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,597.06

Dynapro Dual SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

AERO4 Big Brake Rear Parking Brake Kit
Item No: 140-10953
Pistons: 4
Rotor Diameter: 14
Caliper Mount: Radial
Min. Wheel Diameter: 18
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,954.39

AERO4 Big Brake Rear Parking Brake Kit Description

AERO4 Rear Parking Brake kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. Forged AERO4 four piston calipers, 14” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs allow builders to personalize the style and performance for every application.

Forged Narrow Superlite 4R Big Brake Rear Parking Brake Kit
Item No: 140-9224
Pistons: 4
Rotor Diameter: 12.88
Caliper Mount: Radial
Min. Wheel Diameter: 17
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,674.39

Forged Narrow Superlite 4R Big Brake Rear Parking Brake Kit Description

Forged Narrow Superlite 4R rear disc kits provide the ultimate Big Brake solution for popular muscle car rear axles that require a parking brake. FNSL4R four piston calipers, 13” or 14” two-piece rotors, and high performance BP-10 compound pads provide optimized and balanced braking to compliment front big brake upgrades on all types of custom, show and high performance street machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs allow builders to personalize the style and performance for every application.

Forged Dynalite Pro Series Rear Brake Kit
Item No: 140-2111
Pistons: 4
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $765.77

Forged Dynalite Pro Series Rear Brake Kit Description

FDL Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications where individual wheel parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of off-road, competition, and other customized applications. FDL calipers can be optioned with a full range of finishes to reflect personalized style. Rotor choices provide options for high-tech show winning style, or heavy weight durability and cooling capacity for high heat competition.

Forged Dynalite Rear Parking Brake Kit
Item No: 140-7147
Pistons: 4
Rotor Diameter: 12.19
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $856.79

Forged Dynalite Rear Parking Brake Kit Description

This group of FDL Pro-Series rear disc kits provides a complete solution for popular muscle car rear axles that require a parking brake. Forged billet Dynalite four piston calipers, 12.19” one-piece drum/rotors, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.

Forged Dynalite Rear Drag Brake Kit
Item No: 140-0264
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $567.71

Forged Dynalite Rear Drag Brake Kit Description

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.

Forged Dynalite Rear Drag Brake Kit
Item No: 140-5349
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $582.39

Forged Dynalite Rear Drag Brake Kit Description

FDL Rear Drag kits are true bolt-on kits available for all popular muscle car rear axles and aftermarket rears built with custom axle ends. Kits in this group are purpose built for sportsman category door cars and others with full functional four-wheel disc brakes. Based on the specific style of housing end and axle offset, mounting kits securely install the four-piston forged Dynalite caliper over 3/8” plate steel rotors that are mounted to the axle with an aluminum hat. Standard kits include solid face rotors, with optional drilled rotor kits available to further reduce driveline weight in classes where every weight advantage is necessary.

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-12548
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,119.94

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-12550
Pistons: 4
Rotor Diameter: 11.44
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,119.94

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-14141
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,119.94

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit
Item No: 140-14139
Pistons: 4
Rotor Diameter: 11.25
Caliper Mount: Lug
Min. Wheel Diameter: 15
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $1,119.94

Dynapro SA Lug Drive Dynamic Rear Drag Brake Kit Description

Wilwood's new Billet Dynapro Lug-Drive Dynamic Stainless Super Alloy Rotor Brake Kits are especially beneficial to cars that rely heavily on the rear brakes for stopping and any other high speed, heavy weight cars that generate above average rear brake heat. The lug-drive rotor mounting system eliminates the rotor bolts and instead, a large single internal snap-ring retains the rotor in the hat, making assembly and installation literally a snap. This system allows the rotors to move independently of the hats as they expand and contract through heat cycles. All thermally generated stress is removed from the rotor attachment points. The rotors stay flatter and run truer. Kits are available in two rotor diameters: A traditional 11.44” diameter and a smaller 11.25” diameter for clearance with bead lock rims. The hats are no longer distorted by stresses generated by thermal expansion and shrinkage of the rotors. Spring-loaded, replaceable stainless steel inserts in each lug-drive slot protect the aluminum hat from wear that would otherwise be caused by loading of the stainless steel rotor against the hat when brake torque is applied. Kits are available in Single and Dual caliper configurations.

Dynapro Low-Profile Rear Parking Brake Kit
Item No: 140-11397
Pistons: 4
Rotor Diameter: 11
Caliper Mount: Lug
Min. Wheel Diameter: 14
Axle Flange: Olds/Pontiac
Axle Offset: 
From: $856.79

Dynapro Low-Profile Rear Parking Brake Kit Description

Forged Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axles on applications that require a parking brake assembly and extra clearance for 14.00” to 15.00” rim applications. Forged billet Dynapro Low-Profile four-piston calipers 11.00” one-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of custom performance street/strip and show machines. The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking. Optional caliper finishes and rotor designs enable the builder to personalize the style and optimize brake performance for every individual application.



*Minimum diameter is required. Check wheel clearance diagram before purchasing or installing.





Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved