Billet Superlite 4R Radial Mount Caliper – Part No: 120-6543-rs
Call (805) 388-1188
Billet Superlite 4R Radial Mount
Prod #: 120-6543-RS
Price: $560.46

Billet Superlite 4R Radial Mount - Product Summary

Pistons
Piston Count 4
Piston Area (in²) 2.22
Piston Type Thermlock
Dust Boot No
Rotor Dimensions
Rotor Width(in) 1.25
Rotor Diameter(in) 13.06
Pad Dimensions
Pad Area (in²) 8.2
Pad Volume (in³) 4.9
Duty Rating & Material
Material Aluminum
Weight(Lbs) 5.7
Colors & Finish
Color Black
Finish Black Powder Coat

Mounting
Mount Center(in) 5.98
Mount Position Rear Mount
Mount Side Right Hand
Mount Type Radial
Product Documents
Product Data Sheet

Click To Download
Installation Instructions


120-6543-rs - Product Description

Billet Superlite 4R Radial Mount

This specially configured Superlite SL4R narrow body caliper features an increased bridge radius to allow proper pad alignment and bridge clearance for use with 13.00" to 14.00" diameter rotors. A special body design is used with 16mm pads to provide the narrowest possible profile for tight clearance applications. Radial mounting simplifies adaptation and provides two planes of adjustment for accurate alignment over the disc.

A key to the superior performance of the SL4R comes from the extremely durable, efficient and lightweight body design. Starting at 4.50 pounds it is the product of computer generated solid modeling and FEA stress analysis technology. A reinforced radial transition from the piston bore housings to the closed end bridges has produced the strongest SL caliper bodies ever built. Additional strength and resistance to deflection comes from the four high-strength steel end bridge bolts. A fifth center bridge bolt provides even more overall strength and easy access to the pads without the need to remove the caliper from the mount.

SL4R calipers come with machined aluminum pistons and rubber dust boots. Aluminum is lightweight with high resistance to corrosion and fast heat dissipation. The dust boots seal out debris to keep the pistons and caliper bores running smooth. High temperature square faced bore seals have the largest possible sealing area and provide controlled piston retraction. Three piston bore options are available to match the fluid and brake clamping bias requirements of any custom vehicle application.


Vehicle Applications
Driving Environment Street Rods
Vehicle Sub-Types
Application Duty Heavy Duty
Driving Environment Street Performance
Vehicle Sub-Types Domestic
Application Duty Heavy Duty
Driving Environment Street Performance
Vehicle Sub-Types Import
Application Duty Heavy Duty
Driving Environment Rally
Vehicle Sub-Types
Application Duty Medium Duty
Driving Environment Road Race
Vehicle Sub-Types
Application Duty Medium Duty
Driving Environment Late Model Asphalt
Vehicle Sub-Types ASA, All Pro, SW Tour, etc...
Application Duty Medium Duty
Driving Environment Stock Cars
Vehicle Sub-Types NASCAR, BGN, CTS, ARCA, etc...
Application Duty Medium Duty
Driving Environment Late Model Dirt
Vehicle Sub-Types STARS, UMP, IMCA, etc...
Application Duty Heavy Duty
Driving Environment Northeast Modified
Vehicle Sub-Types Dirt or Pavement
Application Duty Heavy Duty
Driving Environment Open Wheel
Vehicle Sub-Types Sprint, Midget, etc… Dirt or Pavement
Application Duty Heavy Duty
Driving Environment Off Road
Vehicle Sub-Types
Application Duty Heavy Duty
Driving Environment Industrial
Vehicle Sub-Types
Application Duty Heavy Duty

Product Specifications

Rotor Compatibility
Rotor Width(in) 1.25
Maximum Rotor Width(in) 1.28
Minimum Rotor Width(in) 1.19
Maximum Rotor Diameter(in) 13.06
Minimum Rotor Diameter(in) 11.75

Brake Pad Specifications
Brake Pad Type 1 7420
Brake Pad Type 2 N-A
Brake Pad Type 3 N-A
Total Pad Area (in²) 8.2
Total Pad Volume (in³) 4.9
Mount
Piston Specifications
Piston 1 Bore(in) 1.25
Piston 2 Bore(in 1.12
Piston 3 Bore(in)
Piston 4 Bore(in)
Total Piston Area (in²) 2.22

Mounting Specifications
Mount Type Radial
Mount Side Right Hand
Mount Center(in) 5.98
Mount Hole Size(in) 0.39
Mount Height(in) 1.62
Inlet Thread Size 1/8-27 NPT

Additional Notes

In addition, each SL4R is equipped with SRS bridge plates. SRS plates eliminate bridge wear caused by pad gouging. The spring-loaded action of the SRS plates also eliminates pad rattle and dampens pad squeal. Two piece bleed screws and dampened fluid tubes are recess mounted to shield them from track debris and other potential damage sources. A full range of brake pad compounds is available to match the brake response and heat range of any competition or sports driving application.


Parts & Accessories

O-Ring Kit 130-7221
Replacement Dust Boot N-A
Replacement Piston 1 200-7555
Replacement Piston 2 200-7556
Replacement Piston 3 N-A
Replacement Piston 4 N-A
Cross-Over O-Ring Kit N-A
Bridge Bolt Kit 230-5976
Wear Plate L/H 300-5923
Wear Plate R/H 300-5922
Pad Retainer N-A
Bleed Screw Kit 220-6069
Self Bleeder Tube 190-8310
Cross-Over Tube 190-5975




Follow Wilwood on Facebook Follow Wilwood on Twitter see Wilwood Disc Brakes see Wilwood Disc Brakes
All images shown are for illustrative purposes only. Actual product received may be different than what is portrayed on the web site.
Wilwood makes every effort to maintain our web site to ensure the accuracy of prices and product information. However, product information and prices are subject to change without notice. Please call (805) 388-1188 before ordering to verify current prices and product information.
     Copyright © 2018 Wilwood Engineering, Inc. - All Rights Reserved