Name: Classic Series D11 Caliper Front Brake Kit
Brand: Wilwood
Availability: InStock

Front Brake Kit – Part No: 140-16801-D

Call (805) 388-1188

Classic Series D11 Caliper Front Brake Kit

Prod #: 140-16801-D

Price: $1,209.58

Available Brake Kit #140-16801 Configurations

140-16801
Black Calipers
11.30-inch Rotors
Undrilled Rotors

140-16801-D
Black Calipers
11.30-inch Rotors
SRP Drilled Rotor Rotors

140-16801-DR
Red Calipers
11.30-inch Rotors
SRP Drilled Rotor Rotors

140-16801-R
Red Calipers
11.30-inch Rotors
Undrilled Rotors

Available Brake Kit #140-16801 Configurations

140-16801
Black Calipers
11.30-inch Rotors
Undrilled Rotors

140-16801-D
Black Calipers
11.30-inch Rotors
SRP Drilled Rotor Rotors

140-16801-DR
Red Calipers
11.30-inch Rotors
SRP Drilled Rotor Rotors

140-16801-R
Red Calipers
11.30-inch Rotors
Undrilled Rotors

Front Brake Kit — 140-16801-D

Kit Contents
Wilwood Classic Series D11 Caliper Front Brake Kit Parts Laid Out - Black Powder Coat Caliper - SRP Drilled & Slotted Rotor Click Image to Close
View Custom Caliper Colors

Kit Summary
OE Hub Offset:	.00
(Increase / Decrease Track Width)
Spindle Type:	Factory Disc Spindle
Mount Type:	Lug
Caliper Type:	4 - Black Powder Coat
Rotor Diameter:	11.30
Min Wheel Diameter Req'd*:	14
*This Brake Kit may fit 14-inch wheels. Please refer to the wheel clearance diagram to check to see if it will fit your specific wheel. Wheel Clearance Diagram

UPC Number
UPC	889545104707

	WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
	Applicable to Brake Pads Only

Classic Series D11 Caliper Front Brake Kit

Wilwood's Classic Series D11 four piston calipers are a direct bolt-on replacement for the original equipment Kelsey-Hayes calipers on all 1965-67 Ford Mustang, Fairlane, Ranchero, Falcon, Comet, and Mercury Cougar.

Forged billet aluminum bodies, internal fluid crossover, stainless steel pistons, and high-temperature seals put an end to the rust, leaking, bore pitting and seal failures that plague the OE caliper design. These kits feature the D11 calipers, 11.30" diameter one-piece rotors, DOT compliant stainless braided brake lines, and Promatrix performance compound pads. The OEM style one-piece cast iron rotors with integrated hubs simplify installation while providing superb thermal stability and wear resistance. D11 calipers can use factory-style brake pads, and fit in stock location with original brackets and rotors.

Watch more videos!

1966 Ford Mustang D11 Front Kit Install

Fitment & Installation Details

Classic Series D11 Caliper Front Brake Kit Assembly Schematic

Classic Series D11 Caliper Front Brake Kit Assembly Schematic Zoom Image

Compatible Vehicles for this Brake Kit

BRAKE KIT: Classic Series D11 Caliper Front Brake Kit

SPINDLE TYPE:

Factory Disc Spindle;

This Brake Kit is Compatible with the Following Vehicle Makes: Ford Mercury

Note: Kit may fit other vehicles, call Wilwood Sales⁄Tech Support at (805) 388-1188 for more information.

View All Vehicles

Caution
	THIS BRAKE KIT HAS A HUB OFFSET OF: .00 This Hub Offset will move the wheels inward or outward from the fender by this amount on each side of the vehicle
NOTE: Check "Figure 2. Wheel Clearance Diagram" in the installation Instructions below to verify you have adequate wheel clearance for this kit.

Wheel Clearance	Assembly Instructions
Wheel Clearance Diagram Click Image to Close	Assembly Instructions

Notes

Kit Components & Specifications

Calipers
Left Hand - Part No:	120-16510-BK
Right Hand - Part No:	120-16510-BK
Type:	D11
Finish Color:	Black Powder Coat
Piston Count:	4
Piston 1 Bore (in):	1.62
Piston 2 Bore (in):	1.62
Piston Area (In²):	4.12
Piston Type:	Stainless
Mount Type:	Lug
Brake Pad Plate:	D11
Brake Pad Area (In²):	8.27
Brake Pad Volume (In³):	5.8
Pad Compound:	PM - ProMatrix
D11 Caliper - Black Powder Coat Click Image to Close

Rotors
Left Hand - Part No:	160-14324-BK
Right Hand - Part No:	160-14323-BK
Type:	1 PC Hub and Rotor
Style:	SRP Drilled & Slotted
Surface Finish:	Black Electro Coat
Material:	Iron
Outside Diameter (in):	11.29
Width (in):	0.94
Vane Count:	Vented
Design Type:	SRP-BLK
Bedded:	No
Dynamically Balanced:	No
1 PC Hub and Rotor - Iron - Black Electro Coat Click Image to Close

Rotor Hats
Hat - Part No:
Type:
Material:
Finish Color:
Hat Offset Dimension (in):
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Hubs
Hub - Part No:
Type:
Material:
Finish Color:
Mount Style:
Bolt Circle 1:
Bolt Circle 2:
Bolt Circle 3:
Stud Diameter - BC 1:
Stud Diameter - BC 2:
Stud Diameter - BC 3:

Parts & Accessories

Caliper Parts
O-ring Kit:	130-17057
Replacement Dustboot:	N-A
Replacement Piston 1:	200-7519
Replacement Piston 2:	200-7519
Replacement Piston 3:	N-A
Replacement Piston 4:	N-A
CrossOver O-Ring Kit:	130-10540
Crossover Tube:	N-A
Self-Bleeder Tube:	N-A
Bridge Bolt Kit:	N-A
Wear Plate - Left Hand:	330-16286
Wear Plate - Right Hand:	300-16285
Pad Retainer:	180-16440
Bleed Screw Kit:	220-0627

Brake Lines
Front Line Kit:	220-12168

Hat
Bolt Kit:

Hub
Bolt Kit:

You May Also Be Interested In: